Can illegal parking be handled on 12123?

1 Answers
HoldenLee
07/30/25 12:40am
Illegal parking cannot be handled on 12123. Below are the relevant details about illegal parking: 1. On-site illegal parking penalties: For violating the road traffic safety laws regarding motor vehicle parking regulations, if the driver is present, the traffic police can point out the violation and issue a verbal warning, instructing the driver to leave immediately. Generally, as long as the driver leaves quickly, there will be no fine. If the driver refuses to leave and the parked vehicle obstructs other vehicles or pedestrians, the traffic police may impose a fine ranging from 20 to 200 yuan. 2. Non-on-site illegal parking penalties: If the driver is not present, in addition to issuing a fine and a ticket, if the parked vehicle obstructs other vehicles or pedestrians, the traffic police department has the authority to tow the vehicle to a location that does not hinder traffic or to a designated location by the traffic management authorities.
Was this review help?
17
5
Share
More Forum Discussions

Is it dangerous to drive with high tire pressure?

When the tire pressure is too high, it reduces the contact area between the tire and the ground, increases the pressure on the tire, and affects the tire's grip. When the vehicle passes over bumpy roads, it causes greater impact on the suspension system and increases the risk of a tire blowout. Hazards of excessive tire pressure: The friction and adhesion of the tire will decrease, affecting braking performance; it can cause steering wheel vibration and deviation, reducing driving comfort; it accelerates localized wear of the tread pattern in the center of the tire, shortening the tire's lifespan; increases body vibration, indirectly affecting the lifespan of other components; it causes excessive stretching and deformation of the tire cords, reducing the tire's elasticity and increasing the load on the vehicle while driving; puncture resistance decreases. When encountering sharp objects like nails or glass on the road, they can easily penetrate the tire, causing internal cracks and blowouts. Hazards of insufficient tire pressure: Increases the friction coefficient with the road surface, leading to higher fuel consumption; causes the steering wheel to feel heavy and prone to deviation, which are factors detrimental to driving safety; increases the movement of various parts of the tire, causing abnormal heat due to excessive rolling; reduces the functionality of the cords and rubber, leading to delamination or cord breakage, and excessive friction with the rim causing damage to the bead area and abnormal wear; multiplies the friction between the tire and the ground, causing a sharp rise in tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may lead to a blowout; increases tire body deformation, making the tire side prone to cracks and generating flexing motion, leading to excessive heat, accelerating rubber aging, fatigue of the cord layers, and cord breakage. It also increases the tire's contact area with the ground, accelerating shoulder wear.
15
4
Share

Should You Wait for a Red Light When Making a U-Turn?

If the U-turn signal is red, you must wait; otherwise, it will be considered running a red light. According to the "Road Traffic Safety Law," this offense carries a penalty of 6 demerit points and a fine of 200 yuan. If there is no dedicated U-turn signal, U-turns are not affected by traffic signals when the gap is marked with a dashed line, and you do not need to cross the pedestrian crossing. However, if the gap is marked with a solid line, you must cross the pedestrian crossing and follow the left-turn signal. Making a direct U-turn without adhering to these rules may result in being photographed or penalized by on-site traffic police. When making a U-turn that requires crossing a pedestrian crossing, you must yield to pedestrians: If pedestrians are walking on the right side of the crosswalk and have not reached the centerline of the road, vehicles on the left side must slow down and ensure safety before proceeding. If pedestrians are waiting outside the boundary between motorized and non-motorized lanes and have not entered the roadway, vehicles should slow down and proceed safely. If pedestrians have crossed the boundary between lanes, failing to stop for them is a violation and may result in penalties. If pedestrians are already in the motorized lane (Lane A), vehicles in Lane B must slow down and proceed safely. Failing to yield is a violation. If pedestrians are waiting at the centerline without entering the motorized lane, failing to stop is a violation. If pedestrians cross the centerline into the motorized lane, failing to yield is a violation. If the road is divided by a green median and pedestrians are waiting in the middle, vehicles must slow down and proceed safely. Permissible U-turn scenarios: If an intersection has a U-turn sign, U-turns are allowed. If there is a U-turn signal, follow it. Without a signal, proceed cautiously without obstructing other vehicles or pedestrians. If there are no explicit "No U-Turn" or "No Left Turn" signs, U-turns are generally allowed. This means if the intersection lacks such prohibitions and the centerline is not solid, U-turns are permitted. U-turns are allowed on yellow grid lines, which are no-stopping zones. While stopping on these grids is prohibited, U-turns are permitted unless there is a central barrier. If a U-turn signal is present, follow it—only proceed on green. If "No Left Turn" and "U-Turn Allowed" signs coexist, U-turns are permitted, but left turns are not. Note that "No U-Turn" and "No Left Turn" are not the same. Important considerations when making a U-turn: Check road markings—if they are solid, U-turns are prohibited under any circumstances. Continue driving to find a suitable spot. If a "No Left Turn" sign is present, U-turns are also prohibited, as they involve a left turn maneuver. U-turns must be made from the innermost left-turn lane. Attempting from the second left-turn lane is not allowed. Always yield to oncoming traffic before making a U-turn to avoid accidents and liability. Pay attention to lane arrows—some leftmost lanes may have straight arrows instead of left-turn arrows, prohibiting U-turns even without explicit signs.
16
5
Share

What are the reasons for high fuel consumption in the eighth-generation Accord?

The high fuel consumption in the eighth-generation Accord may be caused by the driver's driving habits, excessive carbon deposits in the engine, or the spark plugs not being replaced for a long time. Below is some relevant information about the Accord: 1. The Accord is a mid-size sedan under Honda. 2. The eighth-generation Accord used a total of three engines: a 2.0-liter naturally aspirated engine, a 2.4-liter naturally aspirated engine, and a 3.5-liter naturally aspirated engine.
13
1
Share

What engine does the 2015 Changan Eado have?

2015 Changan Eado is equipped with two high-efficiency engines independently developed by Changan Automobile: the all-new BlueCore 1.6L naturally aspirated engine and the 1.5T turbocharged direct injection engine. Both engines are new-generation clean, efficient direct injection lean-burn engines with intelligent composite combustion technology, featuring high power output and low noise. In daily driving, these engines provide smooth and comfortable performance, offering a relaxed driving experience. The 1.6L direct-injection naturally aspirated engine delivers a maximum output of 128 horsepower and a peak torque of 168 Nm.
15
4
Share

What is the Eagle tire?

Eagle is a premium series under the Goodyear brand. Relevant information is as follows: 1. The Eagle tire features a three-dimensional tread block design, which automatically expands during braking or sharp turns to increase the contact area between the tire and the ground, ensuring superior grip performance. 2. The Eagle tire utilizes an overlapping cord ply carcass structure, enhancing the torsional stiffness of the braking axis, which significantly improves the vehicle's braking effectiveness. 3. Vehicle tires are in direct contact with the road surface and, together with the suspension system, help absorb shocks during driving, ensuring excellent ride comfort and smooth driving performance.
17
3
Share

What are the reasons for the starter not working?

The reasons for the starter not working: 1. Insufficient battery power or loose connections; 2. Damaged start switch; 3. Short circuit or open circuit in the starter relay coil or burnt contacts; 4. Short circuit or open circuit in the solenoid switch coil or poor contact with the contact disc. The starter is a small gasoline engine equipped with a clutch and transmission mechanism, featuring high power and less susceptibility to temperature effects, capable of starting large internal combustion engines and suitable for extremely cold regions. Starters can be categorized by working principle into DC electric starters, gasoline starters, and compressed air starters. Most internal combustion engines use DC electric starters, which are characterized by compact structure, simple operation, and easy maintenance.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.