Can I withdraw from driving school directly at the vehicle management office?

1 Answers
Austin
07/29/25 8:54am
Withdrawal from driving school cannot be processed at the vehicle management office; you need to go to the driving school to complete the withdrawal procedures. The following are the relevant details about withdrawing from driver's license application: 1. Personal application: If the applicant voluntarily gives up applying for a driver's license or is unable to complete the tests within the specified period due to long-term illness, military service, imprisonment, etc., the applicant should go to the local vehicle management office, fill out the "Motor Vehicle Driver's License Business Withdrawal Application Form", and submit the original and a copy of their ID card. 2. Withdrawal due to legal reasons: The vehicle management office uses the test backlog clearing analysis and judgment system to count the data of expired test permits daily and withdraws them in a timely manner according to the serial numbers. If it is found during work that the applicant has passed away, already obtained a driver's license, or their ID number has been cancelled, the accepting staff at the vehicle management office's business window will fill out the "Application Form" and report it to the responsible business supervisor for review before processing the withdrawal.
Was this review help?
19
0
Share
More Forum Discussions

What to Do If You Keep Failing the Subject 2 Driving Test?

Failing the Subject 2 test is often not due to technical issues but rather psychological ones. Therefore, it's essential to relax, perform normally, and treat the test as practice. Additionally, quickly adapt to the differences in driving feel between the test vehicle and the training car to better handle the exam. Below are some mnemonic tips for the Subject 2 driving test: 1. Reverse Parking: Reversing into and out of the parking space isn't hard. Fasten your seatbelt, shift gears, and flash the left turn signal. Press the clutch, release the handbrake, and slowly lift the clutch to start gently. Adjust the car body by aligning with the right line, and keep the left mirror's vertical gap along the right line. Stop when the front line aligns with your shoulder, shift to reverse, and release the clutch. When the left mirror covers the corner of the line, turn the steering wheel fully to the right. Watch the left mirror for the garage line, turn back one circle at a 30-degree angle, and when the car is parallel to the line, straighten the wheel with two full turns. When the left mirror covers the front corner of the garage, press the clutch and brake. Shift to first gear to exit, turn the wheel fully left when the front touches the line. Stop when the front covers the line, then reverse without changing the wheel position. Watch the right mirror for the garage line, turn back one circle at a 30-degree angle, and when parallel, straighten the wheel with two full turns. Press the clutch and brake when the left mirror covers the front corner. Shift to first gear to exit, turn the wheel fully right when the front touches the line. Stop when the front covers the line, and adjust the car body skillfully. 2. Hill Start: Relax during hill start, align the right line with the middle of the wiper. After aligning the axle with the white line, adjust the car body and check the right mirror. Less than 30 cm is good, start slowly while watching the left mirror. Press the brake when the left mirror touches the line, pull the handbrake without stalling. Press the foot brake, release the handbrake, and turn on the left signal with your left hand. Gently lift the clutch, release the foot brake when you hear the sound change. The car moves slowly forward, completing the hill start. 3. Right Angle Turn: Slow down to first gear before the turn, keeping the car body straight is key. Maintain 30 cm on the left, remember not to cross the line. When the front nears the turning point, turn left without delay. Check the rear wheel in the mirror, and turn back the wheel calmly. 4. Curve Driving: Enter the curve with the front of the car, aiming closely with the left and right edges. Keep the left edge close to the right line, turn back when touching the left line. Move the left line to the middle of the front, and steady the wheel with one full turn. When the right edge nearly touches the left line, aim with half a turn. 5. Parallel Parking: Parallel park on the right, align the axle with the right line. Drive slowly past the right corner, and check the right mirror while reversing. Turn fully right when covering the right corner, then watch the left line reach the middle. Turn left two full circles, then check the left rear mirror. Turn fully right when the rear wheel touches the line, until the car body aligns with the garage line. Stop the car, shift to first gear, and don't forget the left signal. Lift the clutch slowly and watch the left corner, turn back one circle when touching the left line. Turn back two circles when the line reaches the middle, and straighten the car to complete the exit.
4
5
Share

What does the violation code 10051 mean?

Violation code 10051 means: Driving a motor vehicle without obtaining a driver's license. Points (deduction): 0 points; Fine amount: 2000 yuan; Other penalties: Detention for up to 15 days. According to the "Road Traffic Safety Law," driving a motor vehicle requires legally obtaining a motor vehicle driver's license. To apply for a motor vehicle driver's license, one must meet the driving license conditions stipulated by the public security department of the State Council; after passing the examination, the traffic management department of the public security organ will issue the corresponding category of motor vehicle driver's license. Holders of foreign motor vehicle driver's licenses who meet the driving license conditions stipulated by the public security department of the State Council and pass the assessment by the traffic management department of the public security organ may be issued a Chinese motor vehicle driver's license. Drivers must operate motor vehicles according to the vehicle types specified on their driver's licenses; when driving a motor vehicle, they must carry their motor vehicle driver's license with them. Traffic violation codes consist of four to five digits, classified according to the principles of the traffic law, arranged from left to right as follows: the first digit is the behavior classification code, the second digit is the point classification code, the third and fourth digits are the sequential code, and the fifth digit is the item number of the article. First digit: Behavior classification code, indicating the classification code in the Road Traffic Law; Second digit: Point classification code, indicating the classification code for traffic violation points; Third and fourth digits: Sequential code, indicating the sequential code of the behavior within the same behavior classification. For example: 13035—"1" indicates motor vehicle behavior, the second digit "3" indicates a 3-point deduction, and the following "035" indicates the fifth item of the third article in the 3-point deduction category. Behavior classification code violation descriptions: Codes starting with 1 indicate motor vehicle traffic, e.g., 1003 Codes starting with 2 indicate non-motor vehicle traffic, e.g., 2002 Codes starting with 3 indicate pedestrian or passenger traffic, e.g., 3030 Codes starting with 4 indicate highway traffic, e.g., 4002 Codes starting with 5 indicate other regulations, e.g., 5005 Codes starting with 7 indicate implementation rules of provinces, autonomous regions, or municipalities, e.g., 7008 Codes starting with 8 indicate local regulations of cities (regions, autonomous prefectures, leagues), e.g., 8606 There are four common methods to query motor vehicle violations: Visit the office halls of traffic branches in various districts and counties to query through touch terminals; Log in to the external service websites of the public security traffic management bureaus of various cities, find the vehicle violation query, enter the license plate number and vehicle engine number, and click to query; Call (area code + 114) to query: Follow the operator's prompts to enter the license plate number and engine number for query. The operator will announce the results via voice, which is also a quick query method. Query through the Traffic Management 12123 client for iOS 15 and above (V2.8.1B437) or Android 12 and above (V2.8.1B274). Taking the Android app as an example: Open the Traffic Management 12123 software on an Android phone, log in, and view recent violation records in the information on the home page.
12
0
Share

How to Solve the Steering Wheel Noise Issue in Sagitar?

Sagitar steering wheel noise solutions are as follows: 1. If noise occurs during steering, it may be due to issues with the thrust bearing or suspension, requiring inspection at a 4S shop. 2. If the thrust bearing is faulty, noise will occur when turning, and replacing the thrust bearing is necessary. Here’s some related information: Vehicles have dust covers on the strut mounts to prevent dust from entering the thrust bearing. Excessive dust inside the thrust bearing can lead to poor lubrication, eventually causing noise over time.
7
2
Share

What does Lexus PCS mean?

Lexus PCS stands for Pre-Collision Safety System. Below is an introduction to PCS: Introduction: Toyota's Pre-Collision Safety System is called Pre-Collision System, abbreviated as PCS. Its premium brand, Lexus, was one of the first to apply the pre-collision safety system to mass-produced vehicles and has consistently maintained a world-leading standard. Working Principle: The sensor of the PCS pre-collision safety system is a millimeter-wave radar installed at the front of the vehicle. This radar can automatically detect obstacles ahead and calculate the likelihood of a collision. If the system determines that a collision is highly probable, it will sound an alarm to alert the driver to take evasive action.
8
0
Share

What is the fuel consumption of the Toyota Avalon?

Toyota Avalon gasoline version has a real combined fuel consumption of around 9L/100km; the hybrid version has a real combined fuel consumption of around 5L/100km. Here is the related content introduction: The 2020 Avalon does not have high fuel requirements, 92# gasoline is sufficient. If driving at an average speed of 31km/h, the fuel consumption every three hours will reach 5.76L, resulting in a combined fuel consumption of 5.4L/100km for the Avalon. Currently, the car is equipped with a 2.5L and 2.5L hybrid system, similar to the Camry 2.0L model.
6
5
Share

What does the wrench symbol on a Volkswagen dashboard mean?

Volkswagen dashboard displaying a wrench symbol indicates that the vehicle's maintenance cycle has been reached. It does not signify a malfunction, and the symbol will disappear after the car maintenance is performed. Below is relevant information: The purpose of the maintenance indicator light is to remind the driver to service the vehicle after it has been driven a certain distance. Taking the Volkswagen Phideon as an example, this model measures 5074mm in length, 1893mm in width, and 1489mm in height, with a wheelbase of 3009mm. The vehicle is equipped with a 2.0T turbocharged engine paired with a 7-speed dual-clutch transmission, delivering a maximum power output of 165kW and a peak torque of 350Nm.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.