Can I wear white clothes for my driver's license photo?

1 Answers
TravisDella
07/30/25 6:42am
White clothes are not allowed for driver's license photos. Below is some information about the driver's license test: 1. Subject 1: Road traffic safety laws, regulations, and related knowledge test, written exam, computer-based, full score of 100, passing score is 90 or above (including 90). 2. Subject 2: Field driving skills test, practical driving in a closed course, pass/fail only, includes reversing into a garage, parallel parking, S-curve, right-angle turn, and hill start and stop. These five items are mandatory and conducted in sequence, full score of 100, passing score is 80 or above (including 80). 3. Subject 3: Road driving skills test, practical driving on roads or simulated courses, full score of 100, passing scores are 90 or above for large buses, 80 or above for large trucks, and 70 or above for other vehicle types. 4. Subject 4: Safe and civilized driving knowledge, written exam, full score of 100, passing score is 90 or above (including 90).
Was this review help?
16
5
Share
More Forum Discussions

Difference in Speed Limits Between Urban Roads With and Without Center Lines

Difference is: Roads without a center line have a speed limit of 30 km/h in urban areas and 40 km/h on highways. Roads with a single center line have a speed limit of 50 km/h in urban areas and 70 km/h on highways. Additional information: According to Article 45 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China": Motor vehicles driving on roads must not exceed the speed indicated by speed limit signs or markings. On roads without speed limit signs or markings, motor vehicles must not exceed the following maximum speeds: Roads without a center line, 30 km/h in urban areas and 40 km/h on highways. Roads with only one motor vehicle lane in the same direction, 50 km/h in urban areas and 70 km/h on highways. On roads with two or more motor vehicle lanes in the same direction, the left lane is the fast lane and the right lane is the slow lane.
3
2
Share

Does a broken steering gear affect normal driving?

Does a broken steering gear affect normal driving? The following is an introduction to the steering gear: 1. Concept: The steering gear is a machine that helps the driver apply force while turning the steering wheel, reducing the effort required by the driver to achieve a more relaxed and convenient driving experience. 2. Working principle: The electric power steering system assists the driver when turning the steering wheel. The structure of the power steering system is very complex, and it is generally not repairable by ordinary people. With proper maintenance, it is not easy to break. Precautions: Regularly check the oil in the oil cup to ensure it does not fall below the lower limit of the dipstick. If the power steering system runs out of oil, the pressure pump may be damaged. Secondly, change the oil regularly. Third, avoid turning the steering wheel to the extreme. Fourth, try not to turn the steering wheel while the vehicle is stationary.
2
1
Share

What are the causes of fuel pump pressure relief?

The manifestations of slight pressure relief in a fuel pump include: weak engine acceleration; difficulty starting the vehicle, requiring multiple ignition attempts; uneven engine rotation or shaking and vibration; a buzzing sound while driving; a jerking sensation during sudden acceleration; and inaccurate fuel level indicators. Below is more detailed information about fuel pumps: Function of the fuel pump: The fuel pump draws gasoline from the fuel tank and delivers it through pipelines and the fuel filter to the carburetor's float chamber. It is precisely because of the fuel pump that the fuel tank can be placed at the rear of the vehicle, away from the engine, and positioned lower than the engine. Fuel pumps can be categorized into two types based on their driving mechanisms: mechanically driven diaphragm type and electrically driven type. Identification of the fuel pump: There are two fuel pump wires: one is the power supply, and the other is the ground wire. The fuel pump operates with high current, so the wires are thick, while the sensor wires are thin, making them easy to distinguish.
16
2
Share

What engine is used in the Infiniti QX70?

The Infiniti QX70 is equipped with a 3.7-liter V6 naturally aspirated engine. This engine delivers a maximum power of 241 kW, maximum horsepower of 328 HP, and maximum torque of 363 Nm. The engine reaches its peak power at 7,000 RPM and peak torque at 5,200 RPM. It is paired with a 7-speed automatic transmission with manual shift mode. The Infiniti QX70 is positioned as a mid-to-large SUV, with dimensions of 4,865 mm in length, 1,928 mm in width, and 1,680 mm in height, and a wheelbase of 2,885 mm. The Infiniti QX70 meets the China IV emission standard and features multi-point fuel injection. In terms of drivetrain, the Infiniti QX70 comes with a full-time four-wheel-drive system. For suspension, it uses a double-wishbone independent front suspension and a multi-link independent rear suspension.
1
2
Share

What Causes Sudden Engine Stalling at Idle?

The causes of sudden engine stalling at idle are as follows: Clogged idle air jet: A clogged idle air jet, malfunctioning idle system, weak spark in individual cylinder spark plugs, poor valve sealing, intake manifold leaks, incorrect ignition timing (too early or too late), or improper idle adjustment. When the engine idle is unstable, the first step is to adjust the idle speed. If the issue persists after adjustment, check whether the idle jet and idle air jet are clogged. If the jets are clogged, clean them with gasoline or acetone and blow them out with compressed air. Intake manifold leaks: If the jets are not clogged, stabilize the engine at a certain speed and listen for leaks at the intake manifold or the middle/lower gasket of the carburetor. If leaks are detected, they can be fixed by tightening screws or adjusting the gasket thickness. If unstable idle is accompanied by a decrease in engine power, further inspect the spark plugs, valve sealing performance, and ignition timing. If necessary, perform repairs or adjustments.
19
1
Share

What happens when the gear lever is broken?

The gear lever (Gear Lever), traditionally located behind the center console, is responsible for transmitting the engine's power. Here are the related faults that may occur when the gear lever is broken: 1. Gear lever jamming: There is a fault inside the gear lever assembly, and the internal gears of the lever are worn, causing the lever to jam, making it very difficult to push or pull. 2. Brake switch failure: The P-gear locking solenoid valve inside the gear lever fails, or the brake switch malfunctions. 3. Incomplete clutch disengagement: The vehicle's clutch does not disengage completely, which may be caused by the failure of the clutch disc and clutch pressure plate. Generally, the clutch three-piece set needs to be replaced.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.