Can I wear glasses in my driver's license photo?

1 Answers
LeBrayden
07/24/25 1:33pm
Yes, you can wear glasses. Here are the relevant details: 1. Photo requirements: According to the "Road Traffic Safety Law of the People's Republic of China," the photo standards for applicants of motor vehicle driver's licenses are as follows: The photo should be a 1-inch, bareheaded photo of the applicant; a color front-facing photo with a white background, and those who require vision correction must wear glasses; the dimensions should be 22mm*32mm, with the head occupying about two-thirds of the photo's length. 2. Driving skills: Operating a motor vehicle requires certain driving skills. Without these skills, driving a motor vehicle recklessly could lead to traffic accidents. Generally, individuals without a license are not permitted to drive on the road.
Was this review help?
8
1
Share
More Forum Discussions

How to Replace a Broken Car Key?

If your car key is damaged, you can directly go to a 4S store for replacement. The codes inside the key are backed up at the 4S store. They can retrieve them from the computer and transfer them to the new key. Since smart keys use low-intensity radio waves, frequently placing the smart car key and mobile phone together may cause interference from the phone's frequency, leading to malfunction. If a smart car key gets wet, the internal circuits may burn out, also causing malfunction.
8
5
Share

What is the wading depth of the Haval H6?

The maximum wading depth of the Haval H6 is approximately 900mm. The wading depth of the Haval H6 is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when passing through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Haval H6 is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth must not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before the vehicle enters the water, always turn off the auto start-stop function to prevent the engine from automatically restarting after stalling in the water, which could cause severe damage due to water ingress. Assess the underwater road conditions based on the passage of vehicles ahead and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at a low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, observe warning water level markers, trees, and reference points such as the wheels and doors of other vehicles to judge the water depth before deciding whether to proceed. Know your vehicle's safe wading depth. If the water depth exceeds half the height of the tires or the engine's air intake, do not enter the water recklessly; consider taking an alternative route.
11
2
Share

What is the tire size of the Changan CS55?

The Changan CS55 comes with two tire sizes: 17-inch and 18-inch, with specifications of 225/60R17 and 225/55R18 respectively. The tire model specifications are usually marked on the tire sidewall, displaying information such as tire size, aspect ratio, and tread width. The Changan CS55 is an SUV model launched by Changan Automobile, with body dimensions of 4500mm in length, 1855mm in width, and 1690mm in height. In terms of exterior design, the Changan CS55 features an obsidian star grille, a leaping wave diving body, a three-dimensional obsidian-style rear, LED "cool" lights, and offers "Dynamic Red" and "Starry Blue" as the main body colors along with high-tech configurations.
13
4
Share

How to reset the maintenance light on the Changan CS75?

The method to reset the maintenance light on the Changan CS75: After starting the engine, there is a switch on the left side of the triangular button on the steering wheel to adjust the car mode. Adjust it to the oil maintenance mode, then press and hold the triangular button for 5 to 7 seconds, and the maintenance light will reset. The Changan CS75 is a compact SUV with dimensions of 4650mm in length, 1850mm in width, and 1705mm in height, and a wheelbase of 2700mm. In terms of appearance, this car features a large horizontal grille, incorporating Eastern aesthetic design concepts, paired with exquisite chrome grille lines. Additionally, it includes new dynamic chrome trim kits, outlining the car's quality and enhancing its overall appearance.
8
3
Share

How to Confirm Vehicle Distance Using Rearview Mirrors?

Methods for confirming vehicle distance using rearview mirrors: The rearview mirror can be divided into four parts, with the outer quarter being the danger zone and the inner three-quarters being the safety zone. It's important to note that due to differences in individual height, rearview mirror angles, and the size of the following vehicle, the imaging in the rearview mirror may vary, meaning this rule of thumb may not apply to everyone. A better approach is to conduct tests in daily driving to develop an accurate method for judging vehicle distance. Rearview mirrors are tools that allow drivers to directly obtain external information about the rear, sides, and lower parts of the vehicle while seated in the driver's seat. For the convenience of the driver's operation, to prevent traffic safety accidents, and to ensure personal safety, all countries require that vehicles must be equipped with rearview mirrors, and all rearview mirrors must be adjustable in direction.
12
1
Share

How to Check the Production Date of a Car Engine?

Methods to check the production date of a car engine: 1. Check the nameplate in the engine compartment. Inside the engine compartment, there is a car nameplate that indicates the car's serial number, engine displacement, model, brand, and importantly, the specific production date. 2. Look for the small nameplate around the door seams. 3. Check the VIN (Vehicle Identification Number) under the windshield. Generally, the VIN is located under the front windshield, and the 10th digit of the VIN represents the production date of the car. 4. Refer to the car's manual. The car engine is the machine that provides power to the car, acting as the heart of the vehicle, influencing its performance, fuel efficiency, and environmental friendliness. Depending on the power source, car engines can be categorized into diesel engines, gasoline engines, electric motors for electric vehicles, and hybrid systems, among others.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.