···
Log in / Register

Can I Use Temporary License Plates After Obtaining Regular Ones?

4 Answers
SanSophie
07/29/25 7:47pm

You cannot use temporary license plates after obtaining regular ones. Once you receive the regular license plates, the temporary ones become invalid. Even if the temporary plates have not expired, they will no longer be valid after the regular plates are issued. For newly registered vehicles, after receiving the new plates, a few car owners may fail to install them. However, it is mandatory to have the plates properly installed at the vehicle management office before driving on the road. Driving without displaying the license plates is considered a violation of the regulations for installing vehicle plates. License plates are metal or plastic sheets affixed to the front and rear of a vehicle, typically made of aluminum, iron, plastic, or paper. They display the vehicle's registration number, registration region, and other relevant information. The primary purpose of license plates is to identify the vehicle's registered region and to trace the owner and registration details of the vehicle.

Was this review help?
9
3
Share
SanEmmanuel
08/14/25 3:18pm

When I first got my new license plate, I had the same thought. To be honest, you really can't use the temporary plate after getting the official one. The temporary plate is just a transitional aid to help you get on the road. A friend of mine tried it once—thinking the temporary plate was more convenient—and kept using it, only to get caught by traffic police, fined, and penalized with points. Temporary plates are designed to be just that—temporary. Once you get the official plate, it's time for the temporary one to retire. Continuing to use it isn't just a violation; it could also lead to accidents—police recognize official plates for safety. My advice is to install the new plate as soon as you get it—don't delay. Keep the old temporary plate as a souvenir if you like, but safe driving comes first. If you drag your feet on replacing it, running into a check could land you in big trouble, and the cost just isn't worth it.

Was this review help?
12
3
Share
Expand All
EmilyRose
10/15/25 7:21am

From the perspective of traffic regulations, the temporary license plate becomes invalid immediately after obtaining the official one. According to my research, temporary plates usually have a validity period of about 30 days and are only effective before receiving the official plate. Once the official license plate arrives, driving with the temporary plate is considered unlicensed driving, risking fines or even vehicle impoundment. This is not only illegal but also causes public inconvenience—traffic police get confused when identifying plates. I recommend checking local regulations and replacing it with the new plate immediately, without taking chances. Safety comes first; legal driving ensures smooth travel for everyone—don't risk big losses for small gains.

Was this review help?
15
5
Share
Expand All
DeAnastasia
11/28/25 8:12am

After obtaining the official license plate, you can no longer use the temporary one. Simply remove the old temporary plate and replace it with the new license plate—it's that easy. I've done it a few times, and the steps are straightforward: clean the license plate frame, align the holes, and secure it tightly. Temporary plates are only for the buffer period; continuing to use them after receiving the official plate may result in warnings or fines from traffic police. Replace them promptly for a hassle-free solution. Ensure the installation is stable to avoid shaking while driving. This way, you can drive safely and compliantly with peace of mind.

Was this review help?
17
1
Share
Expand All
More Forum Discussions

What is the horsepower of the Geely Boyue?

Geely Boyue has a maximum horsepower of 163ps. Taking the 2021 Geely Boyue as an example, it is a 5-door, 5-seater compact SUV with body dimensions of: length 4519mm, width 1831mm, height 1694mm, wheelbase 2670mm, fuel tank capacity 58l, and curb weight 1575kg. The 2021 Geely Boyue is equipped with a 1.8t turbocharged engine, with a maximum power of 120kw, maximum power speed of 5500rpm, maximum torque speed ranging from 1500rpm to 4500rpm, and is paired with a 6-speed manual transmission.
3
3
Share

How is a car battery charged?

Car battery charging method is: 1. Open the front cover of the car and take out the battery charger; 2. Connect the positive terminal of the battery to the positive terminal of the power source, and the negative terminal of the battery to the negative terminal of the power source. Methods to check for insufficient car battery power are: 1. The car horn sound becomes weaker; 2. The car struggles to start, indicating battery discharge; 3. The battery fault light turns on. Precautions for car battery charging are: 1. Battery voltage below 10% of the rated voltage will cause battery discharge; 2. Avoid water entering the battery during charging; 3. Connect directly to the battery for charging, avoid removing the battery to prevent data loss.
16
0
Share

What Causes the Rattling Noise When the Atenza Goes Over Bumps?

Atenza's rattling noise when going over bumps is caused by loose component screws. It is necessary to visit a 4S shop to check the loose parts and tighten the screws. Below is a related introduction to the Atenza: 1. Body Dimensions: The Atenza has a body length, width, and height of 4870mm, 1840mm, and 1445mm respectively, with a wheelbase of 2830mm. 2. Powertrain: This car uses two engines, one is a 2.0-liter naturally aspirated engine, and the other is a 2.5-liter naturally aspirated engine; paired with a 6AT transmission. (1) 2.0-liter naturally aspirated engine: The engine has a maximum power of 158 horsepower and a maximum torque of 202 Nm. The engine's maximum power speed is 6400 rpm, and the maximum torque speed is 4000 rpm. This engine is equipped with a variable valve timing control system and direct fuel injection technology, and uses an aluminum alloy cylinder head and block. (2) 2.5-liter naturally aspirated engine: The engine has a maximum power of 192 horsepower and a maximum torque of 252 Nm. The engine's maximum power speed is 6100 rpm, and the maximum torque speed is 3250 rpm. This engine is equipped with a variable valve timing control system and direct fuel injection technology, and uses an aluminum alloy cylinder head and block.
8
0
Share

When should the original timing belt be replaced?

The original timing belt should be replaced when the vehicle reaches 80,000 kilometers. The functions of the timing belt are: 1. To drive the engine's valve train, ensuring the intake and exhaust valves open and close at the correct times; 2. To guarantee the engine cylinders can properly intake and exhaust air. The replacement procedure for the timing belt is: 1. Remove the valve cover and the timing belt housing; 2. Rotate the crankshaft to position the first cylinder at top dead center, then secure the crankshaft with the fixing bolt; 3. Rotate the intake and exhaust camshafts—there are grooves at the rear of the camshafts—align the grooves of both camshafts horizontally; 4. Remove the old belt and install the new one; 5. Ensure there is no gap at the crankshaft position sensor during installation to avoid triggering fault codes.
20
1
Share

How to Install a Belt?

The method for installing a belt is as follows: 1. Align the ignition marks of the crankshaft and camshaft; 2. Place the belt on the crankshaft pulley and smoothly guide it upwards from the side opposite the tensioner pulley to place it on the camshaft pulley; 3. Then fold the belt into the side of the tensioner pulley and tighten the tensioner. The belt is an important component of the engine's valve timing system, ensuring accurate intake and exhaust timing by connecting to the crankshaft and matching a specific transmission ratio. Steps for replacing the belt: 1. Lift the car with a jack; 2. Remove the engine undercover; 3. After removing the undercover, the generator belt will be visible; 4. Remove the exposed old generator belt; 5. Install the new engine belt. Situations requiring belt replacement: 1. Abnormal belt wear; 2. Belt folding failure; 3. Belt impact load.
14
0
Share

How to Disassemble the Wuling Hongguang Key?

The method to disassemble the Wuling Hongguang key is: 1. Use a flathead screwdriver to pry open the side opening of the key; 2. Open the key casing along the pried gap. Taking the 2019 Wuling Hongguang S3 as an example, it belongs to the mid-size SUV category, with body dimensions of: length 4655mm, width 1735mm, height 1790mm, a wheelbase of 2800mm, a fuel tank capacity of 49 liters, and a curb weight of 1380kg. The 2019 Wuling Hongguang S3 is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 99PS, a maximum power of 73kW, a maximum torque of 140Nm, and is paired with a 6-speed manual transmission.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.