Can I Use Mineral Water Instead of Windshield Washer Fluid?

1 Answers
OBennett
07/30/25 3:10am
Using mineral water instead of windshield washer fluid is not recommended. Windshield washer fluid not only cleans the windshield but also offers multiple functions such as anti-static, anti-fog, lubrication, and anti-freeze properties, which mineral water lacks. Prolonged use of mineral water can lead to severe scratching of the windshield and increased friction between the wiper blades and the glass, resulting in skipping and unusual noises during operation. Windshield washer fluid is a consumable in automotive use, primarily composed of water, alcohol, and ethylene glycol. It can be categorized into solid and liquid forms, with solid washer fluid typically designed for use in environments above 0 degrees Celsius.
Was this review help?
17
4
Share
More Forum Discussions

What is the top speed of the Corolla 1.2t?

The top speed of the Corolla 1.2t is 185 kilometers per hour, while in actual driving conditions, its practical top speed is 120 kilometers per hour. Taking the Corolla 2021 Pioneer Plus Edition as an example, it is a compact 4-door 5-seater sedan with the following dimensions: length 4635mm, width 1780mm, height 1455mm, wheelbase 2700mm, and a fuel tank capacity of 50 liters. The Corolla 2021 Pioneer Plus Edition is equipped with a 1.2t turbocharged engine, delivering a maximum power of 85kW at 5200-5600 rpm and a maximum torque of 185Nm. It features front-wheel drive, with a MacPherson strut front suspension and an E-type multi-link independent rear suspension.
16
2
Share

What is the engine oil specification for the Mazda3 Axela?

The engine oil specification for the Mazda3 Axela is 5W30 or 0W30. Engine oil serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and act as a shock absorber for the engine. The Mazda3 Axela is a compact car under Changan Mazda. Taking the Mazda3 Axela 2020 Manual Zhimei Edition as an example, its body dimensions are 4662 mm in length, 1797 mm in width, 1445 mm in height, with a wheelbase of 2726 mm. The Mazda3 Axela 2020 Manual Zhimei Edition is equipped with a 1.5L naturally aspirated engine, with a maximum power of 86 kW and a maximum power speed of 6100 rpm.
11
0
Share

How to Adjust Valves on a Three-Cylinder Engine?

The method for adjusting valves on a three-cylinder engine is as follows: 1. Rotate the crankshaft to determine the engine's firing order; 2. Rotate the crankshaft to reach the top dead center of the third cylinder's compression stroke; 3. When the third cylinder is at the compression top dead center, all other valves are closed, allowing adjustment of the intake and exhaust valves for the third cylinder; 4. Rotate the crankshaft another 360 degrees to reach the exhaust top dead center of the third cylinder. A three-cylinder engine is an engine composed of three cylinders, where three identical single cylinders are arranged within a single block sharing one crankshaft to output power. Its primary function is to convert chemical energy into mechanical energy. The principle of a three-cylinder engine involves: when converting gasoline's chemical energy into thermal energy, the combustion and expansion of the gas mixture within the sealed cylinder push the piston to perform work, thereby transforming thermal energy back into mechanical energy.
11
5
Share

How to clear the 'Check Vehicle Condition Immediately' warning on Sagitar?

The method to clear the 'Check Vehicle Condition Immediately' warning on Sagitar is: 1. Turn on the hazard lights and hold down the button on the right side of the odometer without releasing it; 2. Turn the key to the on position, the dashboard will display 'Confirm Reset', then press the OK button on the steering wheel to confirm the reset. Taking the Sagitar 2021 Manual Fashion Smart Connect Edition as an example, its body dimensions are: length 4753 mm, width 1800 mm, height 1462 mm, with a wheelbase of 2731 mm. The Sagitar 2021 Manual Fashion Smart Connect Edition is equipped with a 1.2L turbocharged engine, with a maximum power of 85 kW, maximum power speed of 5000 rpm, maximum torque of 175 Nm, and maximum torque speed ranging from 1400 to 4500 rpm.
4
3
Share

How to Turn on the Low Beam Headlights of Honda City?

The method to turn on the low beam headlights of Honda City is: 1. Locate the control lever on the left side of the steering wheel; 2. Rotate the top part once to turn on the parking lights; 3. Rotate it once more to turn on the low beam headlights. The Honda City is a compact 4-door 5-seater sedan with body dimensions of: length 4450 mm, width 1695 mm, height 1477 mm, a wheelbase of 2600 mm, and a fuel tank capacity of 40 liters. The Honda City is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 96 kW at 6600 rpm, a maximum torque of 155 Nm at 4600 rpm, and features front-wheel drive. The front suspension uses a MacPherson strut independent suspension, while the rear suspension employs a torsion beam non-independent suspension.
6
1
Share

Can the Lynk & Co 03 Use 92 Octane Gasoline?

The Lynk & Co 03 can use 92 octane gasoline, but the manufacturer recommends using 95 octane or higher. Prolonged use of 92 octane gasoline may damage the engine, so it is advised against. Taking the 2021 Lynk & Co 03 as an example, it is a 4-door, 5-seat compact car with body dimensions of 4639mm in length, 1840mm in width, and 1472mm in height, with a wheelbase of 2730mm and a curb weight of 1395kg. The 2021 Lynk & Co 03 is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 156PS and a maximum power speed of 5000rpm, paired with a 6-speed manual transmission. The front suspension uses a MacPherson independent suspension, and the rear suspension uses a multi-link independent suspension.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.