Can I use an electronic ID for the Subject 1 test?

1 Answers
LeoLee
07/24/25 9:31am
You need to bring your ID card for the test, as electronic IDs cannot be used. If you don't have an ID card, you can apply for a temporary ID, which holds the same validity as a regular ID. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the Subject 1 test can be taken twice on the same day. If you fail the first attempt, you can retake it for free. If you fail the second attempt, the test is terminated, and you can only reschedule after ten days. The Subject 1 test consists of 100 questions, including single-choice and true/false questions, each worth 1 point, totaling 100 points. If you answer 11 questions incorrectly, the system will automatically submit the test and end the session. The Subject 1 test is computer-based and lasts 45 minutes. Subject 1 test content: Regulations on driver's licenses and motor vehicle management; Road traffic conditions and regulations; Road traffic safety violations and penalties; Regulations on road traffic accident handling; Basic knowledge of motor vehicles; Local regulations; Knowledge of braking systems and safety devices for large and medium-sized passenger and cargo vehicles; Special knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject 1 test precautions: Candidates should dress appropriately—no slippers are allowed. Electronic devices and bags are prohibited in the test room. Bring your ID card and queue to enter the waiting hall. Observe the precautions and procedures on the large screen, and store personal belongings in lockers before entering the test room. At the identity verification area, you will be assigned a seat. Once seated, begin the test. Ensure the camera is aligned with you and follow test discipline. If you fail the first attempt, you can retake it the same day. If you fail again, you must pay to reschedule. After the test, queue to collect your score report and sign it. Without a signature, the result is invalid. There is no limit to the number of times you can reschedule the Subject 1 test. Each test allows one retake if you fail. If you don't take the retake or fail it, the test is terminated, and you must reschedule. For Subject 2 and Subject 3, there are only five attempts. Subject 2 and Subject 3 tests can be rescheduled after ten days. If you fail the Subject 3 safe driving knowledge test, your passing score for the road driving skills test remains valid. The driving test consists of three subjects: Subject 1, Subject 2, and Subject 3. Subject 1 covers laws, regulations, and knowledge related to road traffic safety. Subject 2 is the field driving skills test. Subject 3 includes two parts: road driving skills and safe driving knowledge. The safe driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4. However, the official term (as per the Ministry of Public Security's Order No. 123) does not include "Subject 4."
Was this review help?
2
3
Share
More Forum Discussions

What are the five major components of a scrapped vehicle?

Scrapped vehicle five major components are the engine, steering gear, transmission, front and rear axles, and frame. The following is an introduction to scrapped vehicles: 1. Introduction: A scrapped vehicle is one that has reached a certain service life, or has been severely damaged or is in poor technical condition due to other reasons, cannot be repaired, consumes more than 50% of the fuel specified by national standards, and is compulsorily scrapped in accordance with government regulations. 2. Meaning: When a vehicle reaches a certain age, most of the components of its various systems have completed their service life, and maintenance and repairs can no longer ensure safe driving. It should be scrapped and replaced in time. 3. Age regulations: According to the Ministry of Commerce website, the Ministry of Commerce, the National Development and Reform Commission, the Ministry of Public Security, and the Ministry of Environmental Protection jointly issued the "Regulations on the Compulsory Scrapping Standards for Motor Vehicles," which was reviewed and approved at the 68th ministerial meeting of the Ministry of Commerce on August 24, 2012, and came into effect on May 1, 2013.
16
0
Share

What to Use to Wipe Glass Without Fogging?

You can use dish soap or soapy water to wipe the glass to prevent fogging, because soapy water and dish soap contain surfactants that effectively prevent water vapor from condensing on the surface, thus acting as an anti-fogging agent. Mix dish soap and water in a ratio of approximately 1:10, then use a soft cloth to apply the prepared solution to the inside of the front and rear glass. Wiping it on and letting it dry will enhance the anti-fogging effect. Principle: The active molecules in dish soap can be divided into two parts—one end is a charged, polar hydrophilic group, and the other end is a non-polar hydrophobic group. The active molecules can disrupt the surface tension of water. When soap molecules enter the water, the polar hydrophilic part breaks the attraction between water molecules, reducing the surface tension of water. This allows water molecules to spread evenly on the treated glass surface, forming a water film that adheres to the glass. The more rainwater hits the glass, the larger the water film becomes, maintaining the glass at an extremely high level of clarity.
8
4
Share

What Causes Blue Smoke When Starting a Car?

The reasons for a car emitting blue smoke are as follows: 1. Incorrect engine oil: The viscosity of the engine oil is not properly selected. 2. Carbon deposits: The piston rings lose tension and fail to seal properly due to carbon buildup, allowing engine oil to enter the cylinder through the gaps. 3. Aging or hardening of valve seals: The seals cannot expand and contract with the temperature of the valves, causing engine oil to enter the cylinder during cold starts. 4. Stuck PCV valve: Combustible mixture leaks into the crankcase, thinning and degrading the engine oil, which then enters the combustion chamber and accelerates oil consumption. Solutions for a car emitting blue smoke: 1. Use additives: Repair the cylinder. 2. High-temperature-resistant engine oil: Use high-viscosity engine oil that can withstand high temperatures. 3. Use a high-quality oil filter: Improve the cooling of the engine oil. 4. Repair the cylinder block: Repair or replace the cylinder block.
5
5
Share

Are More Gears in a Transmission Better?

In general, the more gears a transmission has, the better it is. A transmission with more gears tends to have higher transmission efficiency and smoother gear shifting. Transmissions can be categorized into two types: manual and automatic. Below are the specific details: 1. Manual Transmission: The shifting clutch is a wet multi-plate clutch. When hydraulic pressure forces the piston to press the driving plates and driven plates together, the clutch engages. When the working fluid is discharged from the piston cylinder, the return spring causes the piston to retreat, disengaging the clutch. 2. Automatic Transmission: After the engine starts, the crankshaft drives the pump impeller to rotate via the flywheel. The centrifugal force generated by the rotation causes the working fluid between the impeller blades to be flung from the inner edge to the outer edge.
9
0
Share

Which region does the license plate 'Hong' belong to?

There is no license plate in China that starts with 'Hong'. None of the provinces or municipalities in China have 'Hong' as their abbreviation. The abbreviations for license plates of various provinces in China are as follows: Beijing is 'Jing', Tianjin is 'Jin', Shanghai is 'Hu', Chongqing is 'Yu', Inner Mongolia Autonomous Region is 'Meng', Xinjiang Uygur Autonomous Region is 'Xin', Tibet Autonomous Region is 'Zang', Ningxia Hui Autonomous Region is 'Ning', Guangxi Zhuang Autonomous Region is 'Gui', Hong Kong Special Administrative Region is 'Gang', Macao Special Administrative Region is 'Ao', Heilongjiang Province is 'Hei', Jilin Province is 'Ji', Liaoning Province is 'Liao', Shanxi Province is 'Jin', Hebei Province is 'Ji', Qinghai Province is 'Qing', Shandong Province is 'Lu', Henan Province is 'Yu', Jiangsu Province is 'Su', Anhui Province is 'Wan', Zhejiang Province is 'Zhe', Fujian Province is 'Min', Jiangxi Province is 'Gan', Hunan Province is 'Xiang', Hubei Province is 'E', Guangdong Province is 'Yue', Hainan Province is 'Qiong', Gansu Province is 'Gan', Shaanxi Province is 'Shaan', Guizhou Province is 'Gui', Yunnan Province is 'Yun', Sichuan Province is 'Chuan'.
15
1
Share

Where is the oxygen sensor located on the old Jetta?

The old Jetta has two oxygen sensors, one located at the position where the exhaust pipe exits the engine and another behind the three-way catalytic converter, referred to as the front and rear oxygen sensors. The oxygen sensor primarily detects the oxygen content in the exhaust, and the ECU adjusts the fuel injection quantity based on the data it transmits. There is no difference in structure or working principle between the front and rear oxygen sensors. Below is some relevant information about automotive oxygen sensors: The automotive oxygen sensor is a critical feedback sensor in the electronic fuel injection engine control system. It is a key component in controlling vehicle exhaust emissions, reducing environmental pollution caused by vehicles, and improving the fuel combustion quality of the vehicle engine. There are two types of oxygen sensors: zirconium dioxide and titanium dioxide.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.