Can I Use 92 Octane Gasoline When the Car Manual Recommends 93 or Above?

What Does the Manufacturer's Suggested Retail Price Mean When Buying a Car?

It refers to the official listed price. Generally, dealers will provide floating quotes based on this price when purchasing. Additionally, the suggested retail price serves as an important basis for calculating the purchase tax. It is a reference price for buyers, representing a displayed price by one party in the transaction that is not a strict offer but rather for the other party's reference. Related details are as follows: 1. Purchase Tax: The ex-factory price usually requires additional expenses such as purchase tax, license plate fees, and insurance premiums. The purchase tax is a tax levied by tax authorities on the acquisition of specified properties and assets within the scope of the purchase tax system. Vehicle purchase tax is a tax imposed on units and individuals purchasing specified vehicles within China, evolving from the vehicle purchase surcharge. The vehicle purchase surcharge was a special fund collected by the state from vehicle buyers for highway construction. 2. Ex-Factory Price: The ex-factory price is the actual price of the vehicle itself, excluding any additional fees.

19

0

Share

What Causes Severe Handlebar Vibration in Scooters?

Handlebar vibration primarily manifests in three phenomena: engine idle failure, unstable engine idle, and excessively high engine idle. The specific explanations are as follows: 1. Unstable idle: When the engine is idling, the speed fluctuates between high and low, a phenomenon known as unstable idle. This can be caused by either an excessively lean or rich air-fuel mixture. A lean mixture makes the engine difficult to start, causes carburetor backfire, results in unstable idle, reduces power output, and leads to erratic engine operation. A rich mixture causes engine overheating, power deficiency, exhaust pipe backfiring, sluggish acceleration response, and unstable idle. Therefore, both overly rich and lean air-fuel mixtures can lead to unstable engine idle. 2. Excessively high idle: When the engine is idling, the speed remains abnormally high with increased noise, a condition termed excessively high idle. During diagnosis, start the engine and conduct acceleration tests after warm-up. Gradually increase throttle opening—if acceleration performance is good with normal exhaust smoke color, this confirms proper operation of both fuel delivery and ignition systems. Subsequent rapid acceleration tests showing continued proper operation suggest the fault likely stems from either weakened throttle return spring tension or wear on the lower throttle valve edge. 3. No idle condition: After engine startup, releasing the throttle grip causes immediate stalling—this defines a no-idle condition. During troubleshooting, repeated adjustments of the carburetor idle speed screw prove ineffective after engine startup.

19

5

Share

Can I Still Drive After Two 6-Point Deductions?

Whether you can continue driving after two 6-point deductions depends on the circumstances, as traffic police record violations in two ways: on-site penalties by officers or electronic surveillance cameras. The specific situations are as follows: 1. Two 6-point deductions during the probationary period: (1) If both violations were recorded on-site by traffic officers, with the penalty tickets noting the driver's license information, the license will be revoked when processing these violations. You will need to retake the driving test. Additionally, on-site penalties must be handled within 15 days, or a 3% late fee will accrue daily. (2) If one or both violations were recorded by electronic surveillance, you can use another person's license to deduct the points. (3) For licenses above C1, a 6-point deduction will require extending the probationary period by one year. 2. Two 6-point deductions on a full license: (1) If both 6-point violations were on-site penalties, you must attend 'full-score education' and pass the theoretical test (Subject 1) to reclaim your license and clear the points. (2) If one or both violations were recorded electronically, you can ask a friend to help deduct the points for one 6-point violation. (3) For licenses above C1, if points are deducted during the scoring cycle, you must undergo an annual license review within 30 days after the cycle ends.

18

1

Share

What Causes Increased Engine Noise and Lack of Power During Acceleration?

When a car experiences sluggish acceleration accompanied by loud and muffled engine noise, these are symptoms of insufficient engine power. This condition often manifests during high-speed driving or uphill climbs, especially under heavy loads, where the engine clearly lacks power. Pressing the accelerator fails to produce a corresponding rapid increase in speed. The reasons for insufficient engine power include the following: Carbon buildup: This includes carbon deposits in the cylinders, throttle body, spark plugs, and intake system. Excessive carbon buildup reduces ignition energy and intake efficiency, ultimately leading to decreased engine power, resulting in sluggish acceleration and a muffled sound. Fuel system issues: Using incompatible fuel octane ratings can reduce the car's power output. Alternatively, blockages in the fuel tank vent, fuel tank switch, fuel filter, or fuel lines between the tank and carburetor can restrict fuel supply, leading to a lean air-fuel mixture and weak acceleration. Air intake problems: A clogged air filter due to prolonged use without cleaning restricts airflow, causing an overly rich air-fuel mixture and reduced engine power. For turbocharged vehicles, a malfunctioning turbocharger will prevent the engine from delivering power even when the accelerator is pressed. Engine overheating: Insufficient engine oil or coolant, or a malfunctioning cooling system, increases engine load and impairs heat dissipation. Overheating degrades lubrication, accelerates mechanical wear, and reduces engine power. Regular engine maintenance includes the following methods: Use the appropriate grade of lubricating oil. For gasoline engines, select SD to SF-grade oil based on the exhaust system's additional components and usage conditions. For diesel engines, choose CB to CD-grade oil according to mechanical load, ensuring it meets the manufacturer's specifications. Regularly change the oil and oil filter. Over time, lubricating oil degrades in quality, and after a certain mileage, its performance deteriorates, leading to engine issues. To prevent problems, replace the oil periodically based on usage conditions and maintain the correct oil level. As oil passes through the filter's fine pores, solid particles and sludge accumulate in the filter. A clogged filter may cause oil to bypass the filter element through the relief valve, carrying contaminants back into the lubrication system and accelerating engine wear. Periodically clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through piston ring gaps, mixing with metal particles from wear to form sludge. In small amounts, it remains suspended in the oil, but in large quantities, it clogs filters and oil passages, hindering lubrication and increasing wear. Regularly use a radiator cleaner to remove rust and scale deposits. This ensures proper engine operation and extends the lifespan of both the radiator and the engine.

14

3

Share

How Many Years Can a Car Be Driven Before It Is Scrapped?

Non-commercial vehicles and commercial vehicles have different scrapping periods, as detailed below: Scrapping regulations for non-commercial vehicles: For household 5-seat cars and 7-seat SUVs, as well as small and micro non-commercial vehicles, there is no usage period limit. However, when the normal mileage reaches 600,000 kilometers, the state will guide the vehicle to be scrapped. In addition to the above vehicles, small and micro non-commercial passenger cars, large non-commercial cars, and wheeled special machinery vehicles also have no usage period limit. Common scrapping regulations for commercial vehicles: Small and micro taxi passenger vehicles have a scrapping period of 8 years, medium-sized taxi passenger vehicles 10 years, and large taxi passenger vehicles 12 years. Public transport passenger vehicles have a scrapping period of 13 years, other small and micro commercial passenger vehicles 10 years, and large and medium-sized commercial passenger vehicles 15 years. Micro commercial trucks have a scrapping period of 8 years, light and large commercial trucks 10 years. The vehicle scrapping process is as follows: The car owner applying for scrapping and renewal must fill out an "Application Form for Vehicle Modification, Transfer, Alteration, Suspension, or Scrapping" and affix the owner's seal. The registration office will accept the application and issue a "Vehicle Scrapping Notice" for vehicles that have reached the scrapping period. For vehicles that have not reached the scrapping period, after inspection by the vehicle inspection office and confirmation that they meet the scrapping standards, a "Vehicle Scrapping Notice" will be issued. The owner can choose a qualified recycling company to dismantle the vehicle with the "Notice". The recycling company will dismantle the vehicle and take photos after verifying the "Notice". The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. The owner must submit the "Modification Form", "XX Province Vehicle Renewal Technical Appraisal Form", "Scrapped Vehicle Recycling Certificate", and photos of the dismantled vehicle to the vehicle inspection office for verification and signature. The license plate will be reclaimed, and the scrapping registration will be processed according to regulations. Special notes: According to Article 30 of the "Motor Vehicle Registration Regulations", if the vehicle is damaged and cannot be driven back to the registration location, the owner can sell the scrapped vehicle to a local motor vehicle recycling company. Commercial vehicles converted to non-commercial vehicles must be scrapped according to the original commercial vehicle scrapping period. According to Article 43 of the "Motor Vehicle Registration Regulations", after completing the transfer or cancellation of motor vehicle registration, the original owner can apply to use the original license plate number for a newly purchased vehicle when registering. The application must meet the following conditions: (1) The application must be submitted within six months after the transfer or cancellation of registration; (2) The owner must have owned the original vehicle for more than three years.

12

0

Share

What is the appropriate tire pressure for the GS4 car?

The normal tire pressure range for the GS4 car is 2.3~2.7bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2bar in winter and decreased by 0.1bar in summer. This data is based on the international GBT2978-2008 standard requirements. Generally speaking, a tire pressure exceeding 2.8bar is considered too high, and a tire pressure below 2.0bar is considered too low. Tire pressure monitoring is mainly divided into two types: indirect tire pressure monitoring and direct tire pressure monitoring. Direct tire pressure monitoring: Uses pressure sensors installed in each tire to directly measure the tire pressure. The pressure information is sent from inside the tire to a central receiver module via a wireless transmitter, and then the tire pressure data for each tire is displayed. When the tire pressure is too low or there is a leak, the system will automatically alert. Indirect tire pressure monitoring: When the pressure of a tire decreases, the vehicle's weight causes the rolling radius of that wheel to become smaller, resulting in its rotation speed being faster than the other wheels. By comparing the differences in rotation speeds between tires, the system monitors the tire pressure. Indirect tire pressure alert systems actually rely on calculating the rolling radius of the tire to monitor the pressure. Hazards of overinflated tires: Reduced friction and adhesion of the tire, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread of the tire, reducing tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; causes excessive stretching deformation of the tire cords, reducing tire elasticity, and increasing the load on the vehicle while driving. Hazards of underinflated tires: Increases the friction coefficient with the road surface, leading to higher fuel consumption; causes the steering wheel to feel heavy and prone to deviation, among other factors detrimental to driving safety; increases the movement of various parts of the tire, causing abnormal heating due to excessive rolling; reduces the functionality of the cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, causing damage to the bead area and abnormal wear; multiplies the friction between the tire and the ground, causing a sharp rise in tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may lead to a tire blowout. If the tire pressure monitoring indicator light is on, there are generally three reasons: Abnormal tire pressure: Generally, it will alert when the pressure is below 1.8bar or above 3.0bar. At this time, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the tire pressure monitoring system will still record the previous data, causing the tire pressure monitoring indicator light to turn on. At this point, simply reset the tire pressure. Damaged tire pressure sensor: The tire pressure sensor is used to monitor tire pressure and is directly installed inside the tire, connected to the tire inflation port. If the tire pressure sensor is damaged during driving, it will also cause the tire pressure fault light to turn on. For sensor damage issues, only a complete replacement of the part is possible.

2

1

Share

Can I Use 92 Octane Gasoline When the Car Manual Recommends 93 or Above?

What Does the Manufacturer's Suggested Retail Price Mean When Buying a Car?

What Causes Severe Handlebar Vibration in Scooters?

Can I Still Drive After Two 6-Point Deductions?

What Causes Increased Engine Noise and Lack of Power During Acceleration?

How Many Years Can a Car Be Driven Before It Is Scrapped?

What is the appropriate tire pressure for the GS4 car?

What Causes Abnormal Noise from the Car Air Conditioner While Driving?

1.5t with 92 or 95?

What Causes the Backrest of a High-Speed Train Seat to Fail to Lock in Place?

Will Alcohol Wipes Spontaneously Combust in a Car?