Can I undergo the review for deducted points on my driver's license via 12123?

1 Answers
LucyRose
07/30/25 9:35am
Yes, you can undergo the review through the Traffic Management 12123 app, but the review methods may vary in different regions. Here are the specific details: Review Information: For the annual review of a driver's license, you need to provide the original copy of the driver's license, ID card, and the physical condition certificate for motor vehicle drivers. Drivers holding licenses for large buses, tractors, city buses, medium-sized buses, or large trucks must undergo a review at the traffic management department of the public security authority within thirty days after the end of each scoring cycle. Notes: The annual review of a driver's license is a management and audit process. If no points are deducted during each scoring cycle, you only need to participate in the review when renewing the license upon its expiration.
Was this review help?
16
0
Share
More Forum Discussions

How Many Liters of Brake Fluid Does the Envision Use?

Envision uses 3 liters of brake fluid. Introduction to Brake Fluid: Brake fluid is the hydraulic fluid used in the braking system. The water content in brake fluid has a specific limit, and when it exceeds this limit, the fluid must be replaced promptly. Brake fluid naturally absorbs moisture, and over time, water from the air can seep into the brake fluid reservoir through the vent, leading to excessive moisture content. Function of Brake Fluid: It effectively lubricates the moving components of the braking system, extending the lifespan of the brake calipers and seals. Brake Fluid Replacement Interval: Generally, it is recommended to replace brake fluid every 2 years, but this interval can vary depending on usage. The replacement cycle for brake fluid differs among vehicle brands and models, as specified by the manufacturers. Brake fluid is somewhat corrosive and highly hygroscopic. Many service centers now have specialized tools to measure the water content in brake fluid, allowing for a quick check to determine if replacement is necessary. It is crucial to replace brake fluid at the recommended maintenance intervals, ideally following the manufacturer's guidelines.
18
5
Share

What Do the Three Stripes on a Mercedes-Benz Represent?

Mercedes-Benz's three stripes symbolize mechanization on land, water, and in the air. Mercedes-Benz Logo: The Mercedes-Benz car logo can be divided into two types based on the grille design. Mercedes-Benz brand. Both the large emblem and the upright emblem belong to the Mercedes-Benz brand models, which are the most common car logos in daily life. Maybach brand. Maybach was originally an independent French brand, later acquired by Mercedes-Benz. Mercedes-Benz vehicles bearing the Maybach logo belong to the most top-tier flagship models under the Mercedes-Benz Group. Mercedes-Benz Stripes: The difference between one stripe and two stripes on a Mercedes-Benz lies in the vehicle's wheelbase. A Mercedes-Benz with one stripe represents the long-wheelbase version, while a Mercedes-Benz with two stripes represents the standard-wheelbase version. The one stripe and two stripes are located at the front air intake of the vehicle, specifically on either side of the Mercedes-Benz emblem.
15
1
Share

What causes the Audi A6's handbrake to fail?

Automobile handbrake failure can be attributed to driver operation habits and handbrake damage. Driver operation habits: The majority of component failures in automobiles are generally related to the driver's usual operation habits. The occurrence of handbrake failure is also closely tied to the driver's operation habits. If the handbrake is not used correctly during normal operation—such as frequently pulling the handbrake to its full extent, using the handbrake on slopes, or starting the car without releasing the handbrake—it can lead to severe damage to the handbrake braking system. Over time, this can result in handbrake failure. Handbrake damage: During prolonged use, the automobile handbrake inevitably experiences wear and tear, making handbrake failure a gradual issue for the vehicle. In routine maintenance procedures, mechanics rarely inspect the condition of the handbrake. This makes it easy for drivers to remain unaware of handbrake wear until issues arise during driving operations.
14
3
Share

What's the reason for the abnormal noise when shifting gears in the Haval Big Dog transmission?

There are many reasons for abnormal noise when shifting gears in the Haval Big Dog transmission, including bearing abnormalities, abnormal lubrication conditions, and transmission abnormalities. Bearing abnormalities: When a bearing wears out, its clearance increases, and its fitting precision decreases. When a bearing is damaged, it cannot operate normally, resulting in abnormal noise and even damage to the transmission components inside the gearbox, causing the noise. Abnormal lubrication conditions: Insufficient lubrication oil or excessively high viscosity can lead to poor lubrication. In this case, the corresponding lubricating oil (grease) should be replaced; otherwise, it will accelerate the wear of the transmission and shorten its service life. Transmission abnormalities: The bolts on the transmission housing (end cover) may be loose. Vibration during use can cause the bolts to loosen, so they should be checked regularly.
6
5
Share

Is the Lynk & Co 03 Engine a Volvo Engine?

Geely Lynk & Co 03's engine is a Volvo engine. Lynk & Co is a brand under Geely, and it offers both sedans and SUV models. The sedan in the Lynk & Co lineup is the 03, while the SUVs include the 01, 02, 05, and 06, among others. The 03 is a compact sedan with dimensions of 4639 mm in length, 1840 mm in width, and 1472 mm in height, and a wheelbase of 2730 mm. More details about the Lynk & Co 03 are as follows: 1. Interior: The center console features a 10.2-inch touchscreen with excellent overall visual effects; the seats are racing-grade integrated ergonomic sports seats, offering both comfort and a strong sporty feel. 2. Powertrain: The Lynk & Co 03 is equipped with three engines: a low-power version of the 1.5-liter turbocharged engine, a high-power version of the 1.5-liter turbocharged engine, and a 2.0-liter turbocharged engine. 3. Suspension: The front suspension of the Lynk & Co 03 uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension.
6
3
Share

What RPM to Shift from 1st to 2nd Gear?

Generally speaking, for manual transmission vehicles, the engine speed should be around 2000rpm when shifting from 1st to 2nd gear. Below is a detailed explanation about gear shifting: 1. If the car needs rapid acceleration, you can shift gears when the engine speed reaches 3000rpm or even 4000rpm, which will provide stronger power but also increase fuel consumption. 3. Shifting gears at 2000rpm is the most balanced state for the engine. 3. When shifting gears, remember the principle of "accelerate before upshifting, decelerate before downshifting". Gear shifts should be timely, correct, smooth, and quick, and upshifting should not skip gears. 4. If you accidentally select the wrong gear or cannot engage the gear, don't panic; return to the original gear and try again. 5. Pay attention to the coordination between the clutch pedal, accelerator pedal, and gear lever when shifting gears. The correct operation is: depress the clutch pedal – quickly release the accelerator – shift to the corresponding gear – match the accelerator according to the gear, or do not press the accelerator and quickly lift the clutch pedal to the semi-engaged state – gently release the clutch pedal after the clutch is engaged.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.