···
Log in / Register

Can I Transfer to Another Driving School?

5 Answers
SanEliana
07/28/25 1:21pm

You can apply to transfer to another driving school. Below are the conditions for transferring: 1. Transfer of student records: Once enrolled in driving lessons, each student has a driving training file containing information such as "Training Schedule" and "Student Registration Form." The new driving school will use the transfer application to move the file to their institution through the transport management office, completing the transfer process. 2. Fee deduction and payment: The original driving school will deduct certain fees! The amount deducted varies depending on your progress and the terms of your contract. For specific details, you should consult the relevant driving school and local vehicle management regulations.

Was this review help?
14
5
Share
MatteoDella
08/11/25 6:00pm

I've been learning to drive recently, and within just a few days, I noticed something was off. The instructor is always late, and scheduling lessons is incredibly difficult, with appointments booked ages away. After checking online, I found out it's possible to transfer to another driving school, but this depends on the region and the school's policies. Most places allow it, but you need to carefully review the contract signed with the original school to avoid excessive fees. I'm thinking it's best to first contact a new driving school to see if they'll accept me. They usually assess the lessons you've already completed, so you don't have to start from scratch and waste time. If the original school won't refund the tuition, try negotiating for at least a partial refund. Once you've transferred, find a school with reliable instructors and flexible scheduling to make learning smoother and avoid slowing down your progress. In short, don't be afraid of the hassle, but take it step by step to ensure you don't waste money and save both time and stress.

Was this review help?
4
4
Share
Expand All
HazelLee
09/28/25 8:32am

I recently went through the process of transferring driving schools because the previous one was too far from home, making the commute inconvenient. After researching, I found it entirely feasible, with the key being cooperation between the old and new driving schools. First, consult a new driving school to confirm if they accept transfers. Once confirmed, communicate with the old school about withdrawal procedures—they might deduct some fees, but overall, it went smoothly. Personally, I recommend clarifying cost issues in advance, such as whether registration or lesson fees are refundable, to weigh if it's worth it. After the transfer, my new instructor was enthusiastic and scheduled lessons densely, helping me learn much faster. The whole process wasn't difficult, just requiring some time to coordinate—don’t let it affect your learning mood. Remember, when choosing a new place, pick one with a good reputation and high pass rate to avoid further hassle and get your license sooner.

Was this review help?
10
2
Share
Expand All
OscarFitz
11/12/25 3:38am

As a busy working professional, I encountered scheduling conflicts while learning to drive and considered switching driving schools. After researching, I found this is permitted, with many cities supporting such transfers. The key is the process: directly contact the new driving school to see if they accept existing student records, then complete the transfer procedures. Don't forget to handle the fees—some schools don't refund prepayments, so it's best to check before signing the contract. After transferring, choose a nearby or flexibly scheduled location to save time and energy on commuting.

Was this review help?
3
3
Share
Expand All
LaOmar
01/02/26 5:21am

When I was learning to drive, I paid special attention to cost issues and wanted to switch driving schools but was afraid of wasting money. I inquired and found out that it is indeed possible to transfer, but you need to be careful about financial risks. For example, part of the tuition fees already paid may not be refunded, especially during the withdrawal process from the old driving school. It is recommended to first check the contract details and discuss the acceptance conditions with the new driving school, as some places allow for reductions. The transfer process is simple, so don’t delay to avoid additional expenses. After transferring, find a cost-effective option to ensure your money is well spent.

Was this review help?
9
3
Share
Expand All
More Forum Discussions

can you drive a left hand car in india

Yes, you can legally drive a left-hand drive (LHD) car in India, but it is subject to specific regulations and is generally not practical for daily use. India follows the Right-Hand Traffic (RHT) system, meaning vehicles are designed to be driven on the left side of the road, with the driver's seat on the right-hand side (RHD). LHD vehicles are a rare exception, typically allowed only for diplomatic personnel or as temporary imports by foreign tourists under a Carnet de Passages . The primary challenge is safety. An LHD vehicle's visibility is severely compromised on Indian roads. Overtaking slower vehicles like trucks or auto-rickshaws becomes extremely hazardous because you cannot see oncoming traffic clearly. This significantly increases the risk of head-on collisions. Furthermore, navigating toll booths, making tight turns, and interacting with roadside vendors will be awkward and frustrating. If you are considering this, you must navigate a complex bureaucratic process. For a permanent import, you'll need approval from the appropriate transport authority, which can be difficult to obtain. The vehicle may also need to comply with India's Bharat Stage (BS-VI) emission norms. Insurance companies may charge higher premiums or be reluctant to provide coverage due to the perceived higher risk. For the vast majority of drivers, purchasing or renting a standard RHD vehicle is the safer, more convenient, and legally straightforward choice.
4
5
Share

can you drive with propane tank in car

Yes, you can transport a propane tank in your car, but strict safety rules must be followed to avoid the risk of explosion or fire. The primary concern is propane leaking from the tank and accumulating inside the enclosed vehicle cabin, creating a highly flammable gas mixture. For this reason, transportation is only safe under specific conditions. The most critical rule is to never transport a propane tank inside the passenger compartment of a car, SUV, or van. An enclosed space allows gas to build up to dangerous levels from even a small leak. The tank must be secured upright in the trunk of a car or the cargo area of an SUV, but only if there is a way for vapors to escape, such as by rolling down the windows. The absolute safest method is to place the tank upright in the bed of a pickup truck, away from direct sunlight and heat sources. Transportation Factor Safe Practice Rationale Tank Location Trunk or cargo area with ventilation; pickup truck bed is ideal. Prevents gas accumulation in the passenger cabin. Tank Position Always upright and secured to prevent rolling. Ensures the pressure-relief valve functions correctly. Valve Status Tightly closed, with a protective cap or plug installed. Eliminates the primary source of potential leaks. Trip Duration Directly to and from the point of use; avoid leaving in a hot car. Minimizes exposure to temperature changes that increase internal pressure. Tank Condition DOT-approved cylinder, within its requalification date (typically 12 years). Guarantees the tank meets modern safety standards. Before you leave, double-check that the tank’s service valve is fully closed. Use a strap or bungee cord to secure the tank upright so it doesn’t tip over during transit. For small, disposable 1-pound cylinders used for camping, the same rules apply—transport them upright and secured, not loose in the cabin. The goal is to minimize any risk, no matter how short the trip.
4
1
Share

can you drive a car without a manifold

Yes, you can technically start and drive a car a very short distance without an exhaust manifold, but it is extremely dangerous, damaging to the engine, illegal, and should only be considered a last-resort measure to move a disabled vehicle a few feet, like onto a tow truck. The exhaust manifold is the first component of the exhaust system, bolted directly to the engine's cylinder head. Its primary function is to collect hot, toxic exhaust gases from each engine cylinder and funnel them into a single pipe. Without it, these high-pressure, scorching gases (often exceeding 1,200°F) are expelled directly into the engine bay. This creates immediate and severe risks: a high potential for igniting flammable materials (like brake fluid, wiring, or debris), significant engine performance issues due to the loss of backpressure (a controlled resistance in the exhaust system necessary for optimal engine efficiency at low RPMs), and the release of deadly carbon monoxide into the cabin. The oxygen sensors that provide critical data to the engine's computer ( ECU ) are typically located in the exhaust manifold. Running without it will trigger persistent check engine lights and cause the ECU to default to a "limp mode," resulting in poor fuel economy, rough idling, and a severe lack of power. Furthermore, the uncontrolled escape of exhaust disrupts the function of the catalytic converter, leading to its rapid failure and ensuring your vehicle will fail an emissions test. Legally, driving without a properly functioning exhaust system violates Department of Transportation regulations regarding noise and emissions in all 50 states. Aspect With Functional Manifold Without Manifold Engine Bay Temperature Normal operating range (190-220°F) Extreme heat (600°F+) Cabin Air Quality Safe, sealed system Risk of carbon monoxide poisoning Engine Performance Optimal power and fuel economy Rough idle, loss of power, poor mileage Exhaust Sound Controlled, muffled Extremely loud (110+ decibels) Check Engine Light Off (when no issues) On (O2 sensor errors) Legal Compliance Compliant with DOT/EPA standards Violation of noise and emissions laws Fire Hazard Minimal Severe
5
1
Share

can you drive a car with out a cv axle

No, you should not drive a car without a CV axle. Attempting to do so is extremely dangerous and will cause immediate, severe damage to your vehicle. The CV axle (Constant Velocity axle) is a critical drivetrain component that transfers power from the transmission to the drive wheels. Without it, the vehicle cannot be powered. If an axle breaks while driving, you'll lose power to the wheels, and transmission fluid will leak out, potentially leading to a complete transmission failure. The immediate risks are significant. The wheel on the side of the broken axle will have no control, which can make the vehicle difficult or impossible to steer safely. Furthermore, with the axle removed, the wheel may detach from the vehicle, causing a catastrophic accident. Even moving the car a very short distance, like out of a garage, is not recommended as it can damage the wheel bearing and other suspension components. The only possible exception is for a professional mechanic performing a specific repair that requires briefly rotating the transmission output shaft with the car elevated and off, but this is not "driving" in any sense. For any on-road movement, the car must be towed. Potential Consequence Estimated Repair Cost (Beyond Axle Replacement) Likelihood Transmission Damage from Fluid Loss $1,500 - $4,000+ High Wheel Bearing Failure $300 - $600 High Damage to Suspension Components $500 - $1,500+ Moderate Wheel Detachment & Accident Incalculable (Safety Risk) Low, but catastrophic The safest and most cost-effective action is to have the vehicle towed to a repair shop. Driving without a CV axle turns a relatively inexpensive repair into a very expensive and dangerous situation.
20
5
Share

can you drive a car without a downpipe

Yes, you can technically drive a car without a downpipe, but it is not safe, legal, or advisable for more than a very short distance , such as moving the car a few feet in a repair shop. The downpipe is a critical component that connects the exhaust manifold or turbocharger to the rest of the exhaust system. Driving without it immediately creates several major problems. The most obvious issue is the deafening exhaust noise . With the exhaust gases exiting directly under the engine bay, the sound will be extremely loud, potentially violating local noise ordinances and drawing unwanted attention. More critically, it poses a serious safety hazard. Those hot, toxic gases, including deadly carbon monoxide, can be forced into the passenger cabin through the cabin air intake or open windows, creating a severe health risk. From a mechanical standpoint, your car's engine relies on a complex network of sensors to run efficiently. The primary oxygen (O2) sensors are typically located in the downpipe. Without it, these sensors cannot read exhaust gas composition, causing the engine control unit (ECU) to go into a "limp mode." This results in poor performance, rough idling, significant loss of power, and drastically reduced fuel efficiency. On modern turbocharged engines, the lack of a downpipe can also damage the turbocharger due to improper pressure regulation. Furthermore, driving without a downpipe means your vehicle has no catalytic converter , which is integral to the downpipe in most modern cars. This makes the vehicle illegal to operate on public roads in the U.S. due to EPA emissions standards. You will fail any emissions test, and the check engine light will be permanently illuminated. The only scenario where operating a car without a downpipe is acceptable is during immediate, off-road repair or diagnosis. For any street driving, a properly functioning exhaust system is non-negotiable.
16
3
Share

can you drive a car without a flywheel

No, you cannot drive a standard road-going car without a flywheel. The flywheel is a critical component bolted to the rear of the crankshaft, and its primary function is to store rotational energy, or inertia. This inertia is essential for smoothing out the engine's power pulses, allowing for stable idling and seamless gear changes in a manual transmission. Without it, the engine would likely stall as soon as you engaged the clutch or came to a stop. In a manual transmission vehicle, the flywheel also provides the friction surface for the clutch disc to engage against. Removing it would make it impossible to disengage the engine from the transmission, meaning the car would lurch forward as soon as you started it. In an automatic transmission, a similar but often lighter component called a flexplate serves the same basic purpose of connecting the engine to the torque converter. While some specialized racing engines, like those in top-fuel dragsters or certain formula cars, use extremely lightweight or non-traditional flywheels, these are engineered as complete systems with specific goals (like rapid acceleration) and are not practical or safe for daily driving. For any consumer vehicle, the absence of a flywheel would lead to catastrophic drivability issues and severe engine damage. Engine Performance Aspect With Flywheel Without Flywheel Engine Idle Stability Smooth and consistent Extremely rough, prone to stalling Clutch Engagement (Manual) Gradual and controllable Impossible or violently jarring Low-Speed Drivability Manageable and smooth Nearly impossible to control Crankshaft Stress Dampened and balanced Excessive torsional vibration, risk of failure Overall Vehicle Safety Safe for road use Unsafe and undrivable
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.