Can I take the driver's license and motorcycle license tests together?

2 Answers
LaTucker
07/29/25 2:52am
No. Those who have obtained one type of driver's license (such as a motorcycle license) can only take other types of driver's license tests (e.g., car driver's license) after one year. When registering for and taking the additional license test, applicants must bring their ID card and the previously obtained driver's license. Those who pass the test will be eligible for the additional license. Below is relevant information about driver's licenses: License issuance period: If a motor vehicle driver has not accumulated 12 penalty points in any scoring cycle during the six-year validity period of their motor vehicle driver's license, they can renew it for a ten-year validity period. If they continue to have no 12-point accumulations in any scoring cycle during the ten-year validity period, they can renew it for a long-term valid motor vehicle driver's license. Test content: The examination subjects include three items: traffic regulations and related knowledge, field driving, and road driving (including safe and civilized driving). Each subject requires prior appointment before taking the test (special circumstances may be scheduled through the green channel for driving tests), and the test is taken after the appointment.
Was this review help?
18
1
Share
SawyerDella
08/12/25 6:46am
I just got my driver's license too, and I really wanted to get my motorcycle license at the same time, but found out that the policy doesn’t allow applying for both together. Traffic regulations require you to first obtain one type of license before you can add another. I understand this is mainly because there could be conflicts in exam schedules and practice arrangements, such as overlapping test times for the written exam or limited availability at training grounds. Additionally, many places now use online exam booking systems that automatically schedule tests, meaning you can only participate in one type of license exam process at a time. My advice is to focus on completing one license first and then apply for the motorcycle endorsement—this saves energy and complies with the rules.
Was this review help?
20
4
Share
Expand All
More Forum Discussions

What are the reasons for a car's weak acceleration when starting?

The reasons for a car's weak acceleration when starting are: 1. Carbon deposits in areas such as the valves, idle speed motor, intake tract, combustion chamber, and spark plugs; 2. Driving in congested roads, where the car frequently accelerates and decelerates, can lead to a weak feeling when driving again; 3. Poor fuel quality can affect the gasoline filter and fuel lines, possibly causing inadequate fuel supply and resulting in weak acceleration; 4. A clogged three-way catalytic converter directly impacts the vehicle's acceleration performance and can also increase fuel consumption, leading to weak acceleration when starting.
17
3
Share

What does the scan sign in the car mean?

The scan sign in the car refers to scanning, which means searching for radio stations and then stopping. Generally, only older car models have a physical scan button. Other buttons in the car include: 1. The mode button is used to switch multimedia modes; 2. The mute button is used to control the mute mode of the multimedia; 3. The vol knob is used to adjust the volume of the multimedia; 4. The seek button is used to switch songs or channels—pressing this button will play the previous or next song; 5. Band is for channel selection; 6. Scan is for radio station searching; 7. Tune is for sound effect selection.
4
3
Share

Where is the clutch slave cylinder located on the Nissan Sylphy?

The clutch slave cylinder of the Nissan Sylphy is installed near the engine on the transmission. Below is more information about the clutch slave cylinder: 1. The clutch master cylinder and slave cylinder function as two hydraulic cylinders. The master cylinder has inlet and outlet oil pipes, while the slave cylinder has only one pipe. When the clutch is pressed, the pressure from the master cylinder is transmitted to the slave cylinder, causing it to operate. The release fork then disengages the clutch pressure plate and disc from the flywheel, allowing gear shifting to begin. 2. When the clutch is released, the slave cylinder stops working, and the clutch pressure plate and disc re-engage with the flywheel, resuming power transmission. The oil in the slave cylinder flows back into the reservoir. If gear shifting becomes difficult or disengagement is incomplete, it is necessary to check the clutch master and slave cylinders for oil leakage. Any issues should be resolved promptly to reduce wear.
8
0
Share

What is the method for removing a car tire?

The method for removing a car tire is: 1. Use a socket wrench to loosen the tire's fixing screws in a diagonal sequence; 2. Place the jack into the slot and use it to lift the vehicle; 3. Remove the loosened screws one by one to detach the tire. Situations requiring tire replacement: 1. Tire deformation; 2. Severe damage to the tire body; 3. Severe damage to the tread; 4. Damage to the bead; 5. Bulging or cracking on the tire sidewall; 6. Damage from running flat; 7. Tires patched more than three times; 8. Tires worn to the wear limit; 9. Chemical corrosion; 10. Severe aging and peeling.
4
4
Share

What is the actual measured ground clearance of the Odyssey?

Odyssey ground clearance is 126MM. Introduction to ground clearance: The ground clearance of a vehicle refers to the distance between the ground and the lowest point of the rigid components at the bottom of the vehicle when it is parked horizontally on a level surface. It is also commonly known as the minimum ground clearance. This is an important parameter in automotive design, as the size of the ground clearance directly affects the vehicle's off-road capability and appearance. Large ground clearance: The greater the minimum ground clearance, the stronger the vehicle's ability to pass over obstacles or uneven terrain, but with a higher center of gravity, stability is reduced. Small ground clearance: The smaller the minimum ground clearance, the weaker the vehicle's ability to pass over obstacles or uneven terrain, but with a lower center of gravity, stability can be increased.
2
5
Share

How to Adjust the High and Low Beams of Car Lights?

There are fixed screw holes for the headlights that can be adjusted. Below are the methods to adjust car lights: 1. Adjusting the height and vertical alignment of car headlights: There is a headlight height adjustment knob next to the steering wheel to meet the need for adjusting the headlight height; 2. The height of car lights is usually adjusted at the factory. If the headlights have been repaired or replaced later, it is very likely that the light height may be incorrect. If the height is too high, the low beam may be mistaken for the high beam; if the height is too low, nothing can be seen beyond 10 meters at night; 3. The preparation work for adjusting car light height is to ensure the car is unloaded, with no passengers or heavy items inside, otherwise the body's sinking height will be affected, leading to accuracy issues in adjustment.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.