Can I Take Subject Two Only After Passing Subject One?

2 Answers
JulianaDella
07/28/25 8:31pm
After completing Subject One, you can start learning Subject Two projects according to the driving school's arrangement. The online registration for Subject Two can be made 10 days after passing Subject One. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," the registration requirement for Subject Two is to complete 26 study hours, including 2 hours of theoretical knowledge, 3 hours of simulated driving, and 21 hours of practical operation. For a C1 driver's license, you can register online for Subject Two 10 days after passing Subject One. Each registration for Subject Two grants two examination attempts. If the first attempt is unsuccessful, a free retake is allowed. If you do not take the retake or fail the retake, the examination ends, and you can re-register for Subject Two after 10 days. Within the validity period of the learning permit, the number of Subject Two examination registrations must not exceed five. If the fifth registration is still unsuccessful, the results of other passed subjects become invalid. To continue learning for the driving license, you need to re-register from Subject One. Subject Two examination content: completing driving tasks within a designated area; demonstrating proficiency in vehicle operation skills; assessing the ability to judge the vehicle's spatial position. Subject Two, also known as the small road test, includes five mandatory items: reversing into a parking space, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves. Subject Two examination precautions: After getting into the car, always adjust the seat and rearview mirrors to a suitable position and state, and fasten the seat belt. For parallel parking, find the correct angle quickly, turn the steering wheel rapidly, react promptly, and coordinate with the vehicle's speed. When stopping on a slope, remember to engage the handbrake. When starting, always turn on the left turn signal, release the handbrake, stabilize the clutch, and gently press the accelerator while releasing the clutch to avoid stalling or rolling back. For turning at a right angle, quickly react to the turning point and coordinate with the vehicle's speed to prevent deviation. For driving through curves (S-curve), slow down. Those with good driving sense during practice can pass smoothly in one go. When reversing into a parking space, control the speed, identify reference points accurately, and make minor adjustments if there is any deviation observed in the rearview mirrors. There are three subjects in the driving test: Subject One, Subject Two, and Subject Three. Subject One refers to the examination on road traffic safety laws, regulations, and related knowledge. Subject Two refers to the examination on field driving skills. Subject Three is divided into two parts: road driving skills and safe and civilized driving common sense. The safe and civilized driving common sense test is conducted after Subject Three, so it is commonly referred to as Subject Four. However, in official terms (i.e., the Ministry of Public Security's Order No. 123), there is no such term as Subject Four.
Was this review help?
3
3
Share
DeEva
08/12/25 1:16am
As someone who has gone through the driver's license process, I can confirm: yes, you must first pass the theoretical test (Subject 1) before you can schedule the practical driving test (Subject 2). Subject 1 mainly assesses traffic rules and safety knowledge—without passing it, the system won't allow you to register for Subject 2. This is a national regulation to ensure everyone's foundational safety: learn the theory first, then get behind the wheel, reducing the risks of reckless driving by beginners. I've seen many eager to take Subject 2, but without solid theoretical knowledge, practical mistakes are common, such as ignoring traffic signals and causing accidents. My advice: don’t skip this step. Once you pass Subject 1 early by practicing mock tests, you can focus on driving practice, making the entire licensing process smoother. Plus, most Subject 1 questions come from a fixed question bank—just simulate a few times, and you’ll be set. Don’t stress too much.
Was this review help?
16
3
Share
Expand All
More Forum Discussions

Where is Great Wall Haval manufactured?

Great Wall Haval is manufactured in Baoding City, Hebei Province. Its models include: Haval F7, Haval H2, Haval H6, Haval H9, Haval Big Dog, etc. Taking the Haval F7 as an example, it is a compact 5-door 5-seat SUV with body dimensions of: length 4620mm, width 1846mm, height 1690mm, wheelbase 2725mm, and fuel tank capacity of 55 liters. The Haval F7 is equipped with a 1.5T turbocharged engine, with a maximum power of 124 kilowatts and a maximum torque of 285 Newton meters. It adopts a front suspension type of MacPherson independent suspension and a rear suspension type of double-wishbone independent suspension.
15
1
Share

What is the function of the cylinder head?

The function of the cylinder head is to seal the cylinder, forming an enclosed space that allows the piston to properly compress fuel and air mixture to generate power. The cylinder is a cylindrical metal component that guides the piston to perform linear reciprocating motion inside it, consisting of cylinder barrel, end cover, piston, piston rod, and sealing elements. The removal method for the cylinder head is: 1. Secure the engine on a turnover stand and place the stand on the workbench; 2. Remove the valve cover; 3. Remove the oil deflector cover on the cylinder head; 4. Loosen the cylinder head bolts and remove all bolts in sequence from both sides to the center; 5. Gently tap the joint between the cylinder head and cylinder block with a soft hammer to loosen it, then remove the cylinder head.
19
2
Share

Where to Press the Wiper to Spray Water?

The spray switch for the wiper is located on the wiper control lever on the right side of the steering wheel. To use the spray function: pull the wiper control lever towards the driver to spray water. If used frequently, make sure to check the windshield washer fluid level. If the level is too low, refill it promptly to avoid dry wiping. Information about the wiper is as follows: 1. The wiper (WINDSHIELD-WIPER) is a blade structure installed in front of the windshield, consisting of a motor, reducer, four-bar linkage, wiper arm spindle, and wiper blade assembly. Its main function is to clear rain, snow, and dust from the windshield that obstructs the view. 2. The power source of the wiper comes from the motor, which is the core of the entire wiper system.
4
3
Share

What is the basis for the alphabetical order of license plate letters in Shandong?

Shandong license plate letters are determined based on the establishment time of municipalities directly under the provincial government within Shandong Province. For example, Jinan City, as a provincial municipality and also the first one, is assigned Lu A in the license plate letter ranking. Qingdao, as the second provincial municipality, is assigned Lu B for vehicle license plates. By 1991, Shandong Province had a total of 11 provincial municipalities and five regions. Among them, the license plate letters for the 11 provincial municipalities were arranged according to the establishment time of these municipalities. With the increase in urban vehicles, one letter representing one provincial municipality was no longer sufficient. Currently, Shandong Province uses Lu U as a supplement for Qingdao license plates and Lu Y as a supplement for Yantai license plates.
10
0
Share

How does a CVT achieve reverse gear?

R gear is the reverse gear, and a CVT transmission has a planetary gear set placed at the input or output end of the continuously variable transmission mechanism. By controlling this planetary gear set, the switching between P, R, N, and D gears can be achieved, enabling reverse gear. Information about CVT is as follows: 1. CVT usually refers to a type of automotive transmission, also known as a continuously variable transmission. The difference between a CVT and a stepped transmission is that its gear ratio is not a series of discrete points but a continuous range of values, resulting in excellent fuel economy, power performance, and smooth driving experience, while also reducing emissions and costs. 2. In a CVT transmission system, traditional gears are replaced by a pair of pulleys and a steel belt. Each pulley is actually a V-shaped structure composed of two conical discs. The engine shaft connects to the small pulley, which drives the large pulley via the steel belt.
16
0
Share

Is the Engine of the Ford Territory Imported?

The engine of the Ford Territory is not an imported engine. More details about the Ford Territory are as follows: 1. The Ford Territory is a versatile midsize SUV, fully compliant with the China VI emission standards, primarily targeting consumers who value diversified entertainment lifestyles. 2. The dimensions of the Ford Territory are 4580mm in length, 1936mm in width, and 1674mm in height, with a wheelbase of 2716mm. 3. The Ford Territory is equipped with a 1.5T EcoBoost145 engine across all variants, delivering a maximum power of 103kW and a maximum torque of 225N·m, paired with a CVT continuously variable transmission.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.