Can I Take Subject Four After Passing Subject Two?

1 Answers
Yarrow
07/29/25 9:13pm
After passing Subject Two, you cannot take Subject Four first. Without the transcript of Subject Three, you are not eligible to take Subject Four, so you must complete Subject Three first. Here is a detailed introduction about it: Subject Four: The so-called 'Subject Four' is the 'Safety and Civilized Driving Knowledge Test' of Subject Three, which is the final part of Subject Three. The only difference is that the test is conducted in a computer room rather than in a motor vehicle, and it is taken by candidates who have passed the road test of Subject Three. Therefore, it is separately referred to as Subject Four. Test Composition: The test consists of 50 questions, mainly in the form of case studies, pictures, and animations, with a full score of 100 and a passing score of 90.
Was this review help?
5
4
Share
More Forum Discussions

Is it easy to replace the clutch plate of the Paladin?

Paladin clutch is easy to replace. Clutch: The clutch plate is a composite material with friction as its main function and structural performance requirements. Automotive friction materials are mainly used to manufacture brake friction plates and clutch plates. The clutch consists of a driven disc assembly, clutch pressure plate and cover assembly, release bearing, and flywheel. The main materials are high-strength steel, aluminum alloy, ductile iron, etc. Replacement method: Remove the battery, battery box, air filter, bottom guard plate, and transmission. Remove the release fork and release bearing. After removing these two devices, the flywheel and pressure plate are released from the controlled state, and the new clutch plate and pressure plate are installed.
18
4
Share

Why does the Honda 5AT transmission make abnormal noise at idle?

Honda 5AT transmission idle noise is caused by long-term failure to change the oil or using inferior oil. Long-term failure to change the oil: Not changing the oil for a long time will cause the transmission oil to become thicker and insufficient in fluidity, resulting in direct friction between components without a protective layer, thereby exacerbating the wear of mechanical parts inside the transmission and causing abnormal noise. Using inferior oil: Because inferior oil has poor temperature resistance and is prone to oxidation reactions, forming sludge and oil residue, which can clog the filter screen and oil passages, increasing friction between internal components of the automatic transmission, leading to abnormal noise when the vehicle starts.
12
0
Share

What is the appropriate tire pressure for the Tayron 330?

The normal tire pressure range for the Tayron 330 is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard. The tire pressure monitoring for the Tayron 330 can be viewed on the dashboard, displayed on the central screen. When the tire pressure monitoring system detects low tire pressure, the display will show a warning icon and message, allowing you to identify which tire is underinflated through the tire pressure warning view. The tire pressure monitoring system is a type of active safety device that alerts the driver in time when there are signs of danger in the tires, prompting them to take appropriate measures to avoid serious accidents. Generally, tire pressure above 2.8 bar is considered too high, and tire pressure below 2.0 bar is considered too low. Hazards of overinflated tires: Reduced friction and adhesion of the tires, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread of the tire, shortening its lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches the tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement in various parts of the tire, causing abnormal heat due to excessive rolling; reduces the functionality of the cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, damaging the tire bead and causing abnormal wear; multiplies friction between the tire and the ground, rapidly increasing tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no seal on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible causes: Abnormal tire pressure: Typically, it will alert if the pressure is below 1.8 bar or above 3.0 bar. In this case, a tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure monitoring is not reset in time, the system will still record the previous data, causing the tire pressure monitoring indicator to light up. Simply performing a tire pressure reset will resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, installed inside the tire and connected to the tire valve, monitors tire pressure. If the sensor is damaged due to impact while driving, the tire pressure warning light may also illuminate. For sensor damage, the only solution is to replace it with a new one.
14
3
Share

Which brands has Mercedes-Benz acquired?

Mercedes-Benz has acquired brands such as Maybach, AMG, Mercedes-Benz, SMART, and Dodge. The following is an introduction to the Mercedes-Benz brand: Brand Introduction: Mercedes-Benz is a world-class luxury automobile brand, considered one of the most prestigious car brands globally. It is renowned for its perfect technical level, high-quality standards, innovative capabilities, and a series of classic coupe models. Internationally, the brand is commonly referred to as Mercedes, while in mainland China, it is known as "Benz" (hence the term Mercedes-Benz). In Taiwan, it is translated as "Benz," and in Hong Kong, it is referred to as "Ping Zhi."
2
4
Share

Can A3 be upgraded to A1?

Yes, as long as you already hold an A3, B1, or B2 driver's license and meet certain conditions, you can upgrade to an A1 license. Below are the relevant details: Conditions to meet: You must have held a city bus or medium-sized passenger vehicle driving qualification for over five years, a large truck driving qualification for over three years, and a tractor driving qualification for over two years. Restrictions: You cannot upgrade if you have been involved in a fatal traffic accident where you bore equal or greater responsibility, if you have driven under the influence of alcohol, or if your driver's license has been revoked or suspended within the past ten years.
1
5
Share

How Many Days Does It Take to Paint a Car Bumper?

Bumper painting generally takes about an hour, and quick painting can save time. For a brand-new unpainted bumper, the process from painting, baking or air-drying, to final polishing can take one day at the fastest, or up to two days for slower processes. Below is an introduction to car bumpers: Safety Function: Bumpers serve purposes such as safety protection, vehicle decoration, and improving the vehicle's aerodynamic characteristics. From a safety perspective, they act as a buffer during low-speed collisions, protecting the front and rear body of the car. Decorative Function: Visually, bumpers are decorative and serve as an important component in styling the car's exterior. Additionally, car bumpers also have certain aerodynamic effects.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.