···
Log in / Register

Can I Study for Subject One While Practicing for Subject Two?

4 Answers
DePaul
08/26/25 3:52am

You can practice simultaneously, but you cannot take the tests at the same time. Here is the relevant information: 1. Taking the Subject One exam: According to the 'Regulations on the Application and Use of Motor Vehicle Driving Licenses,' 'After passing the Subject One exam, applicants can schedule the Subject Two or Subject Three road driving skills test.' 2. Driving skills test: You can schedule the Subject Two 'or' Subject Three road driving skills test. This means that after passing the Subject One exam, you can either first schedule the Subject Two test or first schedule the Subject Three road driving skills test. Below is additional information on the Subject Two test: 1. Test requirements: The requirement for parallel parking is that the driver must park the vehicle in the right-side parking space without the wheels touching the lane lines or parking space lines. 2. Subject Two assessment content and requirements: The five assessment items are reverse parking, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving. Subject Two requires 26 credit hours, of which 2 are theoretical, so the actual practice time is 24 credit hours.

Was this review help?
17
1
Share
LucilleRose
09/08/25 4:46am

Honestly, I think it's completely feasible to study for the theory test (Subject 1) while practicing driving skills (Subject 2). I did it myself this way. As a busy office worker, my driving school allowed me to schedule theory and practical lessons on the same day, saving a lot of time. The key is to coordinate the schedule well. I reviewed Subject 1 questions at home in the morning to familiarize myself with traffic rules, then went to the driving school in the afternoon to practice reversing into parking spaces and parallel parking. This way, the theory could be immediately applied in practice, helping me feel more confident during the exam. Of course, regulations vary by region, so it's best to consult your instructor to avoid any issues. After trying this method a few times, I found it more efficient and helpful for passing the exams quickly, though it requires strong self-discipline. If you have free time, you can build the foundation first before practicing the skills.

Was this review help?
8
3
Share
Expand All
McVanessa
10/22/25 4:49am

As a student, I enjoyed tackling both the written test (Subject 1) and practical driving (Subject 2) simultaneously during my driving lessons—it was quite thrilling. The theoretical knowledge helped me understand driving principles, such as steering or braking rules. The package I signed up for at the driving school included theory classes followed immediately by hands-on practice, which didn’t feel conflicting at all—instead, it made learning new things more exciting. However, when my brain occasionally hit a roadblock, I made sure to schedule breaks to relieve stress. Communicating with my instructor about the schedule and adjusting the pace made everything smoother. Overall, this approach distributed exam pressure and was far more engaging than rote memorization of theory alone.

Was this review help?
6
4
Share
Expand All
VanLila
12/05/25 5:13am

From my years of driving experience, combining theory (Subject 1) and practical (Subject 2) is a smart approach. The theoretical knowledge reinforces safety awareness during practice – like recognizing road signs immediately after studying traffic symbols, which accelerates progress. Most driving schools support simultaneous learning, but manage your energy wisely – don't overexert yourself, adapt progressively. Maintaining consistent weekly practice yields noticeable results and can even reduce tuition costs.

Was this review help?
3
5
Share
Expand All
More Forum Discussions

What Causes a Small Truck to Overheat?

Small truck overheating causes and solutions are as follows: Causes of small truck overheating: System clogging or blockage, internal blockage of the radiator tank; engine blockage, malfunctioning or damaged thermostat, poor water pump performance; airlock, engine failure causing high pressure in the cylinder to enter the cooling system. Solutions for small truck overheating: Clear the system and radiator tank; unclog the engine and repair the thermostat and water pump; fix the airlock and engine. Function of the car radiator: The radiator is a heat exchanger for water-cooled engines, maintaining the engine's normal operating temperature through air convection cooling. Once the engine coolant in the radiator boils and vaporizes due to high temperature, causing the pressure to exceed the set value, it overflows through the radiator cap to release pressure, reducing the coolant and preventing the cooling system pipes from bursting.
10
3
Share

How to Display the Total Mileage on ES200?

The button for displaying the mileage on the Lexus ES odometer is located at the lower left of the instrument panel. There is a button to adjust the trip mileage, and by adjusting it, you can view the desired data display. Here is some relevant information about the Lexus ES: 1. Exterior: The new generation ES model continues LEXUS's new family-style design. The sharp and dynamic spindle grille and the eye-catching L-shaped LED daytime running lights together outline a front layout that is both grand and dynamic. When the gaze shifts to the side of the body, the clean and smooth waistline extends from the front to the rear, interpreting a more agile luxury style. The L-shaped combination taillights and unique exhaust pipe design are the finishing touches at the rear. The ES250 and ES350 feature a dynamic dual exhaust pipe design, while the ES300h's exhaust pipe is cleverly hidden under the veil-like rear bumper. 2. Power Configuration: The ES250 and ES350 are equipped with advanced 2.5-liter and 3.5-liter dual overhead camshaft engines, respectively, both featuring dual intelligent variable valve timing (VVT-i) systems. The maximum output power is 135 kW and 204 kW, respectively, with peak torque of 235 N·m and 346 N·m.
20
4
Share

Does the Lynk & Co Three-Cylinder Engine Shake?

Lynk & Co's three-cylinder engine does exhibit some shaking, but the vibration control is exceptionally well-managed. You may feel a slight tremor inside the car at the moment of engine startup, but during normal driving, the vibration becomes almost imperceptible. Here's an introduction to the causes of three-cylinder engine vibration: 1. Torque imbalance: Due to its odd number of cylinders, a three-cylinder engine cannot achieve the dynamic balance state that even-numbered cylinder engines (like four or six cylinders) can. This results in torque imbalance and uneven power output, leading to vibration. 2. Mounting system reduces vibration: During test drives of Lynk & Co vehicles, apart from the initial engine start, no noticeable engine vibration is felt when the engine is fully warmed up. Moreover, its power performance is comparable to four-cylinder engines. This is because Lynk & Co's engine employs advanced mounting systems, dual-mass flywheels, and internal balance shafts to significantly reduce vibration.
9
2
Share

What are the functions of the GL8 interior rearview mirror?

The Buick GL8 interior rearview mirror is primarily designed to facilitate observation of the rear seats and the area behind the vehicle. The adjustment controls for the GL8 rearview mirror are located on the door armrest. To adjust the left and right rearview mirrors, first press the corresponding mirror selection control button, after which you can adjust the mirrors up, down, left, or right. Buick GL8 rearview mirror heating: The rearview mirror heating function shares the same button with the rear window defroster. Pressing this button activates the heating function for the rearview mirrors. Typically, during rainy or foggy weather, heating the mirrors can improve their clarity. Buick GL8 rearview mirror folding: The rearview mirror folding button is located on the door armrest. Pressing this switch automatically retracts the mirrors. Additionally, some models can be configured to automatically fold the mirrors when the vehicle is locked. Correct adjustment angles for rearview mirrors: Adjust the center rearview mirror so that it is parallel to the horizon, with the horizon positioned at the center of the mirror's surface, occupying the middle 1/2 of the mirror. To ensure a clear view of the road behind, the mirror can be slightly angled toward the driver. For the left rearview mirror, which is particularly important due to the driver's position on the left side of the cabin, it is recommended to adjust the mirror so that the car's body occupies 1/4 of the mirror's surface and the horizon occupies 1/2. This adjustment allows the driver to see the following vehicle closely behind, as well as vehicles in adjacent lanes, aiding in driving judgment.
1
1
Share

Why is the refueling amount larger than the fuel tank capacity?

Car refueling amount is larger than the fuel tank capacity because there is a 5% difference between the rated capacity and the actual capacity of the fuel tank. For example, if the rated capacity is 95 liters, its actual capacity can reach at least 100 liters. It is understood that this error will be further amplified during the manufacturing process of the automobile factory. Most automobile manufacturers increase the "actual capacity" of the fuel tank by 7% or even 10% over the "rated capacity" to improve the safety factor of the car. The gasoline tank of a car is composed of components such as the filler pipe, filter, and filler extension pipe. In a full state, the actual refueling capacity consists of the gasoline in the tank, filler pipe, and filler extension pipe, while the fuel tank capacity marked on the car's factory manual specifically refers to the capacity of the tank itself, excluding the refueling capacity of the connecting pipeline between the tank and the filler port. Refueling precautions: It is wrong to refuel after the fuel tank alarm sounds. It is best not to wait for the fuel tank alarm to refuel. The car's fuel pump is located in the fuel tank. When the fuel tank alarm sounds, the fuel pump will be exposed in the fuel tank. Prolonged exposure in this state can damage the gasoline pump.
10
2
Share

How to Use the Hill Start Assist on the X-Trail?

Below are the steps to use the hill start assist on the X-Trail: 1. When you want to stop on a slope, press the brake pedal all the way down. The brake light will illuminate (note: not the handbrake light). First, ensure that the triggering conditions are met, and then test whether the hill start assist function is activated. 2. Release the brake pedal. If you notice that the brake light remains on and the vehicle stays stationary on the slope, it indicates that the function has been triggered. Otherwise, the vehicle will roll backward. The following are the necessary conditions for using the hill start assist on the X-Trail: 1. The vehicle must be stationary. 2. The vehicle must detect a slope, with the gradient not less than 7%. 3. Fasten the seatbelt to prevent injury due to strong starting force. 4. Release the handbrake. 5. Do not press the accelerator pedal. 6. Additionally, you can disable the engine start-stop function.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.