Can I still take the exam if I am late for Subject 4?

Which wire to cut when there is no key for the motorcycle?

Currently, most domestic motorcycles can be started by cutting the black/white wire on the key. However, joint-venture models like the Suzuki Driller or Yamaha, which use DC ignition or electronic keys, cannot be started this way. For these, you need to connect the red and black wires together. Specific instructions are as follows: 1. AC Ignition: For motorcycles with AC ignition (these have more ignition switch wires, at least four), disconnect the connection between the black/white wire and the green wire, then connect the red and black wires. 2. DC Ignition: For motorcycles with DC ignition (these have fewer ignition switch wires), usually just connecting the red and black wires is sufficient. However, the color coding of wires may vary by brand, so it's best to refer to the specific function of the wires in your motorcycle. Ideally, provide the color of your motorcycle's ignition switch wires for more accurate advice.

19

2

Share

Should You Press the Clutch When Accelerating in a Manual Transmission Car?

You can press the clutch. After stopping on a slope with a manual transmission car, starting on the slope requires giving gas to succeed, as the engine transmits power to the car's transmission via the clutch. The semi-clutch state is only a brief transitional process when starting the car, synchronizing the engine speed with the transmission speed. Key points to note are as follows: 1. Quick Action: When shifting gears while driving, the clutch pedal should be pressed and released quickly, avoiding semi-engagement, as this can accelerate clutch wear. Coordination with the accelerator is also essential. 2. Avoid Unnecessary Pressing: During normal driving, the clutch is fully engaged and should not slip. Except for starting, shifting gears, and low-speed braking, avoid pressing the clutch pedal or resting your foot on it. 3. Avoid Prolonged Pressing: Keeping your foot on the clutch pedal for extended periods while driving can easily cause clutch slippage, clutch plate burning, and in severe cases, damage to the clutch pressure plate and flywheel surface, leading to issues like clutch spring annealing.

5

2

Share

What type of engine oil should be used for motorcycles in summer?

In summer, when temperatures are higher, motorcycles are suitable for using engine oil with a slightly higher viscosity, with a grade of SF or above, and a viscosity of 10W-40 or 15W-40. Below is a related introduction about engine oil: 1. Engine oil brand: The brand of engine oil is not very important, as long as it can be guaranteed to be genuine. It should be purchased from a large-scale formal motorcycle shop or engine oil sales store. 2. Engine oil grade: If the summer temperature is not extremely high, 15W-30 engine oil can also be used. Otherwise, 15W-40 engine oil is better. The larger the number after W, the more resistant it is to high temperatures, and the smaller the number before W, the more resistant it is to low temperatures.

1

3

Share

What Causes Frequent Cycling of Car Air Conditioning?

Car air conditioning frequently cycling on and off can be attributed to the following reasons: 1. Pressure Issues: When the pressure within the air conditioning system exceeds 24 BAR or falls below 2.4 BAR, the pressure switch will control the compressor to shut down. If the system pressure is too high or too low, the cooling effect of the air conditioning will be poor. Therefore, the pressure switch is a likely culprit. 2. Power Issues: When the engine lacks sufficient power (such as when the engine speed is too low, too high, or during rapid acceleration), the engine ECU controls the compressor to stop working via the 822 relay. Keep the throttle at 1500 RPM and observe whether the air conditioning compressor starts frequently. If it still starts frequently, the issue is not related to this aspect. If the compressor operates normally, then the engine system (idle valve, fuel injector, spark plugs, etc.) should be checked.

15

4

Share

Will the 4S shop help deal with the scratches on the newly bought car?

Scratches and paint damage caused by human factors are not considered vehicle quality issues and therefore are not covered under warranty. However, they fall under accidental damage to the vehicle, so you can request the vehicle's insurance company to assess and compensate for the damaged parts. Below are some relevant details about warranty coverage: 1. Documentation: You need to bring your driver's license, vehicle registration, and warranty manual. 2. Time frame: The vehicle must be within the warranty period, which varies for different vehicles. 3. Vehicle issues: The malfunction must be within the scope specified in the warranty manual, and the warranty duration varies for different components.

16

3

Share

What is the difference between 8-ply and 6-ply tires?

The difference between 4-ply and 6-ply tires is that 6-ply tires have more layers than 4-ply tires. The higher the ply rating, the stronger the tire's load-carrying capacity. Specific details are as follows: 1. Specifications: Specifications are the marked data of a tire's geometric parameters and physical performance. Tire specifications are often represented by a set of numbers, where the first number indicates the tire section width, and the second number indicates the rim diameter, both in inches. The letters or symbols in between have special meanings: X stands for high-pressure tires; R and Z indicate radial tires; - indicates low-pressure tires. Ply Rating: Ply rating refers to the nominal number of cord layers in the tire rubber, which may not exactly match the actual number of cord layers. It is an important indicator of tire strength. 2. Ply Rating: Ply rating may be marked in Chinese, such as 12-ply; or in English, such as 14 P.R., meaning 14-ply. Cord Material: Some tires indicate the cord material separately, such as nylon, usually marked after the ply rating; some tire manufacturers mark it after the specifications, using the first letter of the Chinese pinyin, such as 9.00-20N, 7.50-20G, etc., where N stands for nylon, G for steel wire, M for cotton, and R for rayon. Rim Specifications: Indicate the rim specifications compatible with the tire for practical use, such as standard rim 5.00F.

10

1

Share

Can I still take the exam if I am late for Subject 4?

Which wire to cut when there is no key for the motorcycle?

Should You Press the Clutch When Accelerating in a Manual Transmission Car?

What type of engine oil should be used for motorcycles in summer?

What Causes Frequent Cycling of Car Air Conditioning?

Will the 4S shop help deal with the scratches on the newly bought car?

What is the difference between 8-ply and 6-ply tires?

Which of the Three Pedals is the Brake?

What do Trip A and Trip B mean?

What are the damages of waxing to car paint?

Why does the fuel gauge show empty after refueling?