Can I still get my car inspected if it's two months overdue for the annual inspection?

2 Answers
DawsonDella
07/24/25 10:54am
You can still get your car inspected if it's two months overdue for the annual inspection, but you should do it as soon as possible. Regulations: According to the laws and regulations of the traffic management department, if the owner of a vehicle does not participate in the annual inspection after the expiration date, the insurance company will not be liable for compensation in the event of a traffic accident. Exemption policy: Registered private cars that meet the conditions can enjoy the exemption policy and only need to be inspected once a year. Vehicles aged 6 to 15 years must undergo an annual on-site inspection, while vehicles over 15 years old must be inspected every six months. For commercial passenger vehicles, inspections are required once a year within the first 5 years and every 6 months thereafter. For trucks and large or medium-sized non-commercial passenger vehicles, inspections are required once a year within the first 10 years and every 6 months thereafter. Time regulations for annual inspection: The first annual inspection for a small car is required when it reaches six years of age. Non-commercial small and micro passenger vehicles, including family cars over 6 years but under 10 years old, need to be inspected every two years. For a car that has just reached six years, you need to drive the vehicle to the inspection station with your ID card, vehicle license, vehicle and vessel tax or tax exemption certificate, and compulsory traffic insurance policy. After passing the inspection, you will receive a certificate, which you then take along with the other documents to the relevant window to obtain the annual inspection sticker.
Was this review help?
2
4
Share
StAyla
08/11/25 5:54am
I've been driving for decades, and delaying the annual inspection by a couple of months can still be remedied—don't stress too much. But you must act quickly; the longer you delay, the bigger the problems become. Last year, an old buddy of mine missed his inspection by three months and ended up with a 500-yuan fine. His car also had minor issues flagged during the test, which needed repairs before passing. Remember, driving during the overdue period counts as unlicensed driving. If you're stopped by traffic police or get into an accident, insurance may not cover it, and the losses could be huge. Nowadays, the DMV services are quite efficient—just bring your vehicle license, ID card, and compulsory insurance policy to a nearby inspection station. The re-inspection process is simple, just pay a late fee. I strongly advise you to handle it now before it affects your driving safety.
Was this review help?
9
5
Share
Expand All
More Forum Discussions

What are the Penalty Standards for Not Wearing a Seat Belt?

According to the relevant provisions in the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," the following penalties apply for driving without wearing a seat belt: 1. When driving on urban expressways, if the driver fails to use the seat belt as required, a fine of 50 yuan and 2 demerit points will be imposed. 2. When driving on roads other than highways or urban expressways, if the driver fails to use the seat belt as required, a fine of 50 yuan will be imposed without demerit points. 3. Urban expressways refer to urban roads with a central divider, four or more lanes, and full or partial interchanges and controlled access, designed for higher-speed vehicle travel. If passengers fail to use seat belts as required while the vehicle is in motion, a fine of 5 yuan will be imposed. 4. When driving on highways, if the driver fails to use the seat belt as required, a fine of 50 yuan and 2 demerit points will be imposed. 5. When traveling on highways, if passengers fail to wear seat belts as required, a fine of 20 yuan will be imposed. 6. When driving on urban roads with a speed limit below 50 km/h, if passengers fail to use seat belts as required and correct the behavior immediately after being pointed out, an oral warning will be issued.
16
3
Share

What are the 16 new regulations for car modification?

The content includes the following 5 points: 1. Wheel rim style: The new regulations have relaxed the rules for wheel rim modifications. As long as the size and specifications of the wheel rims match those on the registration certificate, the style can be changed. It is even acceptable for all four wheel rims to have different styles; 2. Installing roof racks and side running boards: This new regulation mainly targets SUV and MPV models. The height of the installed roof rack must be within 300 millimeters, and the width of the side running boards must not exceed 5 centimeters beyond the side profile of the vehicle; 3. Vehicle body color: If the vehicle body color is changed through painting or wrapping, the vehicle information must be updated at the vehicle management office within ten days. It is important to note that colors similar to those used by police cars, fire trucks, etc., are not allowed; 4. Grille and front/rear bumpers: Installing new grilles and bumpers must not alter the original length and width of the vehicle. Modifying the vehicle emblem is not permitted, and the bumpers must not have any obvious protrusions; 5. Roof racks can be installed: However, the installation height must not exceed 30cm, and modifications must be carried out under the premise of ensuring safety and stability for passenger vehicles.
14
2
Share

What engine is used in the BJ212?

The engine of the BJ212 is produced by Qingdao Lanqi Liuji Power Technology Co., Ltd. and is a domestically manufactured engine. The engine model of the BJ212 is LQ481QFB. The 1.5T version of the engine has a maximum power of 100 kW, a maximum torque of 200 Nm, and a maximum horsepower of 136. The 2.0T version of the engine has a maximum power of 155 kW, a maximum torque of 320 Nm, and a maximum horsepower of 211. For daily maintenance of the BJ212's engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional equipment of the intake and exhaust systems and usage conditions. For diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will deteriorate during use. After a certain mileage, performance degradation can cause various problems for the engine. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. When engine oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls. These mix with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
9
0
Share

What transmission does the Korando use?

Korando uses a 6-speed automatic transmission with manual mode. Its main function is to change the gear ratio, expand the variation range of driving wheel torque and speed, and allow the engine to operate under favorable conditions. Taking the 2016 Korando as an example, it adopts MacPherson independent suspension at the front and multi-link independent suspension at the rear. Independent suspension can improve wheel grounding performance, thereby enhancing handling and comfort. The 2016 Korando has body dimensions of 4410mm in length, 1830mm in width, 1715mm in height, with a wheelbase of 2650mm.
8
3
Share

What is the reason for a faucet-like light on the dashboard?

The reasons for a faucet-like light on the dashboard are: 1. Faulty spark plugs, ignition coils, fuel pump, or clogged fuel lines in the engine; 2. Poor contact in sensors for water temperature, crankshaft position, air flow, intake temperature, or oxygen sensors; 3. Poor fuel quality causing engine wear and triggering the warning light; 4. Excessive carbon buildup altering the engine's design parameters. The faucet-like light is the engine warning light. The function of the engine is to convert the thermal energy of gasoline or diesel into mechanical energy by burning it in a sealed cylinder, producing expanding gases that push the piston to perform work. Internal combustion engines typically convert chemical energy into mechanical energy.
18
1
Share

Where is the cabin air filter located in a 2013 Mazda 3?

The cabin air filter in a 2013 Mazda 3 is located inside the glove compartment on the passenger side. Open the glove compartment and remove the inner panel to access it. The 2013 Mazda 3 is a compact car with the following dimensions: length 4515mm, width 1745mm, height 1465mm, wheelbase 2640mm, fuel tank capacity 55 liters, and trunk capacity 300 liters. It features MacPherson strut front suspension and multi-link rear suspension. The vehicle is equipped with a 1.6L naturally aspirated engine producing 107PS maximum horsepower, 79kW maximum power, and 146Nm maximum torque, paired with a 5-speed manual transmission.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.