Can I still get a spot if the number of people scheduled for Subject 1 exceeds the expected limit?

What are the common faults of Roewe ei5?

The common faults of this vehicle are the water temperature gauge warning light and the engine fault light coming on. Water temperature gauge warning light comes on: The water temperature gauge is mostly pointer-type in vehicles. Its pointer usually points to the area within the red zone under normal temperature, with a temperature value around 95 degrees Celsius. The indication of the water temperature gauge can inform the current temperature condition of the vehicle, showing whether the engine is operating within the normal temperature range and if there are any abnormal situations such as overheating. Prolonged high-temperature operation can cause severe damage to the engine. Engine fault light comes on: If the engine fault light comes on, it is essential to turn off the engine immediately. First, check if the engine oil is insufficient. After turning off the vehicle, pull out the engine oil dipstick to see if the oil level is between the minimum and maximum marks. If the oil level is normal, then a professional technician should be consulted to determine the reason for the light coming on.

18

1

Share

Differences Between Imported and Domestic Mercedes-Benz E300?

Domestic E300L comes in pre-configured versions such as Fashion Edition, Luxury Edition, and Sport Edition, while the imported E300 allows for custom configurations. Details are as follows: 1. Domestic Mercedes-Benz E300L: The new car maintains the same exterior and interior design as previous models, with some upgrades in configuration. It is equipped with the current 2.0T engine paired with a 9-speed automatic transmission. The current models feature two 2.0T engines with different power outputs: the low-power version delivers a maximum power of 135kW (184PS) and a maximum torque of 300N·m, while the high-power version offers a maximum power of 180kW (245PS) and a maximum torque of 370N·m. 2. Imported Mercedes-Benz E-Class: There are a total of 12 models available or soon to be launched, featuring a 2.0T engine with a maximum power of 180.0kW, maximum horsepower of 245PS, and maximum torque of 370.0N·m. The dimensions are 4925*1860*1470mm (L*W*H).

2

4

Share

What is the battery model for the BMW X3 remote control?

The battery model for the BMW X3 key is Varta. Button-type CR2016 model battery: This type of button battery is widely used in today's car key remotes and is almost one of the most universal car remote batteries. The voltage of this battery is 3V, and generally, car key batteries use a 9V power supply, so each time the batteries are replaced, all three are changed. For example, remotes for models like Honda, Toyota, Volkswagen, Mazda, etc. The specifications of the CR2016 model are a battery diameter of 20mm and a thickness of 1.6mm. Button-type CR2025 model battery: This type of button battery is used far less frequently than the CR2016. However, some car keys still use it. It is thicker than the 2016 model but has a relatively higher storage capacity. The specifications of the CR2025 model are a battery diameter of 20mm and a thickness of 2.5mm. This type of battery is also commonly found in audio remotes.

9

5

Share

Why Can't You Walk Around the Car Clockwise?

Because China implements right-hand traffic, vehicles are generally parked on the right side of the road. The driver needs to enter the driver's seat from the left side, so conducting a counterclockwise inspection from the left front door ensures the driver can see oncoming traffic and road conditions from behind, which is safer. Below are some important points to note for the Subject 3 driving test: 1. Before starting the test: Walk around the car counterclockwise to check the vehicle's condition. 2. After getting in the car: Adjust the seat position, adjust the rearview mirror angle, and fasten the seatbelt. Only after completing these steps can the test begin. 3. During all test items: Listen to the voice prompts and avoid acting before the prompts. Pay special attention to the school and bus stop sections, where there are no voice reminders. You must perform a deceleration and braking action within 30 meters, but avoid braking too early. 4. After completing the roadside parking: Do not rush to exit the vehicle. Open the door, then close it, and wait for the voice announcement of your score before getting out. Don’t forget to close the door after exiting.

14

2

Share

Where is the tail light switch located?

Car tail light switches are typically located on the lighting control lever or rotary knob. Generally, when the parking lights are turned on, the tail lights will also activate simultaneously. Tail lights serve to alert following vehicles of the presence of your car during nighttime driving and indicate the positional relationship between the two vehicles, hence they are installed on both sides of the rear. Characteristics of car tail lights: They possess sufficient luminous intensity to ensure the signals are clearly distinguishable by other drivers or pedestrians even in bright daylight. The light emitted by tail lights during nighttime driving does not cause glare or discomfort to other drivers or pedestrians. How to turn on car tail lights: Start the vehicle's electrical system and activate the headlight switch. Whether high beams or low beams are engaged, the tail lights will automatically illuminate with the headlights. During nighttime driving, tail lights notify following vehicles of your presence and display the spatial relationship between vehicles. Other lighting at vehicle rear: Rear lighting includes red parking lights, red brake lights, red high-mounted stop lights, yellow turn signals, white reverse lights, and red fog lights. All these constitute the rear lighting system of motor vehicles, serving to enhance safety warnings.

11

5

Share

What are the five operations in driving test subject two?

Subject two of the driving test includes five operations: hill start, parallel parking, right-angle turn, S-curve, and reverse parking. Below are specific techniques for driving test subject two: 1. Slow speed: Maintaining a slow speed is the fundamental rule for practicing subject two. Ensure the vehicle doesn't stall while keeping the speed as slow as possible, allowing ample time to adjust each operation. 2. Adjust mirrors properly: After getting in the car, always adjust the mirrors correctly, which is especially important for reverse parking and parallel parking. 3. Master the three-point alignment method: The three points are the driver's eyes, reference points on the car, and reference points on the ground. During subject two operations, it's crucial to accurately locate and observe these points for precise execution. 4. Pay attention to the four corners of the car: The front corner during reverse parking tends to scrape the outer line, while the rear corner may scrape the side lines of the parking space; the front corner during S-curve driving is prone to crossing the line; the front corner during right-angle turns is likely to cross the line; the front corner during parallel parking may scrape the outer line or the left front corner of the parking space, and the right rear corner may scrape the right parking space line. Therefore, always be mindful of the four corners and the outer boundary lines.

15

4

Share

Can I still get a spot if the number of people scheduled for Subject 1 exceeds the expected limit?

What are the common faults of Roewe ei5?

Differences Between Imported and Domestic Mercedes-Benz E300?

What is the battery model for the BMW X3 remote control?

Why Can't You Walk Around the Car Clockwise?

Where is the tail light switch located?

What are the five operations in driving test subject two?

Why does my brand-new car have a burnt smell?

What brand is the Mustang car?

Does the Nissan Sylphy have a heated mirror function?

What does the fault code Code 84 mean for the Cruze?