Can I still drive when '1N5P' is displayed?

3 Answers
JanelleFitz
07/29/25 12:47pm
When '1N5P' appears on the car dashboard, you can still continue driving. Here is more information about '1N5P': 1. The '1N5P' displayed on the car dashboard is the maintenance reminder 'INSP', an abbreviation for inspection in English. This indicates that the vehicle's maintenance cycle has been reached, and it's time for maintenance. 2. Some car models, such as Volkswagen and Skoda, will display '1N5P' when maintenance is due, reminding the owner to replace the engine oil, oil filter, check the air conditioning filter, etc. Methods to clear the maintenance reminder: 1. Turn off the ignition; 2. Press and hold the SET button on the right side of the dashboard; 3. Turn on the ignition without starting the car; 4. Release the SET button, then press the button on the left side of the dashboard for about one second to reset the value; 5. Alternatively, drive directly to a 4S shop for vehicle maintenance and ask the technician to reset it, and the '1N5P' on the dashboard will disappear.
Was this review help?
16
4
Share
StJordan
08/14/25 1:13am
As a seasoned driver with years of experience, I always take dashboard warning lights displaying codes like 1N5P seriously. The last time my car had a similar issue, I first pulled over to a safe spot and checked the battery and fuses. Only after confirming everything was fine did I dare drive a short distance to the repair shop. The meaning of the code was unclear—it could have been a sensor malfunction or an electrical issue, and ignoring it might have damaged the engine. While driving, I kept the speed low and avoided highways because safety always comes first. Minor issues might not immediately disable the car, but I never drive fast or go on long trips under such conditions. My advice is to use a diagnostic tool to read the specific error code as soon as possible or take it to a professional shop. Don’t cut corners and create bigger problems—this affects both peace of mind on the road and the longevity of your car.
Was this review help?
9
0
Share
Expand All
MasonDella
10/09/25 5:57am
In my driving experience, when encountering dashboard codes like 1N5P, I believe it's still possible to drive a short distance as long as the car doesn't stall or show other severe symptoms. For example, recently my old car had a warning light on. I checked the OBD system code with my phone and found it might be a minor fault, so I drove to a nearby shop in the neighborhood for inspection. The code might indicate an air flow meter issue, but driving slowly shouldn't cause major problems. For safety, I suggest you first try turning off the engine, waiting a few minutes, and then restarting it. If the light goes off, it's fine; otherwise, don't risk driving long distances to avoid worsening the damage. For daily maintenance, regularly check the electrical system to prevent similar situations.
Was this review help?
17
5
Share
Expand All
More Forum Discussions

What are the differences between BMW M series?

BMW M series differ mainly in their engines: the M3 is equipped with a 3.0-liter twin-turbocharged six-cylinder engine; the M5 features a 4.4-liter twin-turbocharged eight-cylinder engine; the M6 also comes with a 4.4-liter twin-turbocharged eight-cylinder engine; the X5M is powered by a 4.4-liter twin-turbocharged eight-cylinder engine; and the M2 has a 3.0-liter twin-turbocharged six-cylinder engine. The M series represents the high-performance versions within the BMW family. Currently, the available M series models include the M3, M4, M5, M6, X6M, X5M, and M2. Beyond designing and manufacturing high-performance vehicles, BMW M also extends its expertise to a new domain—BMW Individual customization. This division focuses on designing and producing personalized BMW models tailored to meet the extreme individual demands of customers.
19
4
Share

What are the rules for the parallel parking test in Subject 2?

In the Subject 2 driving test, it is essential to be familiar with the examination rules. Below is a detailed introduction to the rules for the Subject 2 test: 1. Test Objective: To assess the driver's ability to correctly park the vehicle into a roadside parking space on the right side. 2. Operation Requirements: The driver must maneuver the vehicle into the right-side parking space without the wheels touching the lane boundary lines or the parking space boundary lines. 3. Grading Criteria: After the vehicle is parked and comes to a stop, if the vehicle body crosses the boundary lines, 100 points will be deducted. If the wheels touch the lane boundary lines during the maneuver, 10 points will be deducted. If the vehicle is not parked within the designated space, 100 points will be deducted. If the left turn signal is not activated when starting, 10 points will be deducted. If the vehicle stops midway during the maneuver, 100 points will be deducted.
4
0
Share

In which direction should tires be removed?

That is, counterclockwise to loosen and clockwise to tighten. Below is a detailed introduction on changing tires: 1. Removing the tire: When removing the tire, because there are fixed screws on it, pay attention to the direction of force, which is counterclockwise to loosen and clockwise to tighten. Then, pay attention to the use of the jack, making sure to place the jack in the jack slots on both sides of the car's underside to avoid accidents. 2. Inspection: Before changing the tire, the owner must remember to check whether the replacement tire is normal. It is best to perform a simple inspection of the tire to be replaced to avoid unnecessary safety hazards. 3. Sequence: When replacing the tire, pay attention to the operation sequence. Remember not to tighten the screws in a clockwise or counterclockwise order, but to tighten them in a diagonal sequence. The tire is fixed by five screws. It is recommended to first tighten four screws in a diagonal manner, and then tighten the fifth screw. When tightening the screws, it is best to keep the number of turns for each screw consistent to ensure even force distribution on the screws.
2
1
Share

What does steering wheel free play mean?

Steering wheel free play refers to the angle the steering wheel turns to eliminate gaps and overcome elastic deformation when the vehicle is driving straight, or the angle it can turn without causing the steering wheels to deflect when turning left or right while driving. Steering wheel free play angle: The free play angle is generally between 10 to 15 degrees. If it exceeds 25 to 30 degrees, adjustments are needed, as excessive free play can affect the steering wheel's sensitivity. Causes of excessive steering wheel free play: Excessive steering wheel free play is caused by improper assembly or wear of components in the steering system. If the free play exceeds the specified value, check for wear or damage in the steering linkage joints, steering knuckle ball joints, and steering gear rack and pinion, as well as for loose installation or connections of parts. If any issues are found, replace the corresponding components.
13
2
Share

What does the MIN display on the Audi Q3 dashboard mean?

The appearance of MIN on the Audi Q3 dashboard indicates low engine oil level, requiring oil replenishment. After adding oil, you can press the button on the multifunction steering wheel to clear the MIN alert. Solution: When MIN appears, use an oil pressure gauge to check if the oil system pressure is normal; inspect whether the oil level sensor on the oil pan has issues; then carefully check if there are any other pattern messages on the dashboard. If an oil can icon appears, it indicates insufficient oil. Check the oil level using the dipstick, examine the chassis for oil leaks. If no leaks are found, simply add oil to the vehicle. Audi Q3: The Audi Q3 initially offers three four-cylinder engine options. The standard gasoline model is equipped with a 170-horsepower 2.0TFSI engine, while the top-tier model features the 211-horsepower 2.0TFSI engine from the Q5, achieving a 0-100 km/h acceleration time of 6.9 seconds.
13
0
Share

What are the differences between BMW 4 Series and 3 Series?

BMW 4 Series and 3 Series differ in their vehicle types: The BMW 4 Series includes convertible, coupe, and four-door coupe models, while the BMW 3 Series only offers four-door long-wheelbase and standard-wheelbase versions. Essentially, the BMW 4 Series is the coupe version of the BMW 3 Series. Taking the BMW 4 Series as an example, it is equipped with three engines: a low-power 2.0-liter turbocharged engine, a high-power 2.0-liter turbocharged engine, and a 3.0-liter inline six-cylinder turbocharged engine. In terms of body dimensions, the BMW 4 Series measures 4686mm in length, 1839mm in width, and 1660mm in height, with a wheelbase of 2750mm. Exterior-wise, the new headlights and taillights of the 4 Series follow the layout of BMW's new-generation models, with the ultra-cool LED angel eyes and LED daytime running lights showcasing a unique sense of technology.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.