Can I still check my driving test scores after obtaining the license?

What causes abnormal noise when stepping on the accelerator?

The reasons for abnormal noise when stepping on the accelerator are as follows: 1. Loose dashboard or console: During operation, the engine needs to intake a large amount of air. If the air is not filtered, suspended dust in the air will be sucked into the cylinder, accelerating the wear of the piston group and cylinder. Larger particles entering between the piston and cylinder can cause severe "cylinder scoring." The air filter, installed in front of the carburetor or intake pipe, filters out dust and sand particles from the air, ensuring sufficient and clean air enters the cylinder. 2. Clutch malfunction: Another method is to pull out the oil dipstick and check if the abnormal noise persists when stepping on the accelerator. If not, it might be a clutch issue. The turbocharger generates compressed airflow noise during operation. When the engine is revving up or the accelerator pedal is pressed deeply, the engine noise becomes louder. To avoid this, press the accelerator gently and avoid flooring it suddenly, as abruptly pressing it all the way down can cause such abnormal noise.

19

1

Share

What causes the left side of the Audi A6 air conditioning to be cold and the right side hot?

Audi A6 experiencing cold air on the left and hot air on the right can be attributed to the following reasons: 1. Damage to the air conditioning warm water regulating valve, caused by an internal short circuit in the warm water valve. 2. Motor failure, leading to the inability to switch air ducts. Below is an introduction related to car air conditioning: 1. When the heating function is turned on, the high-temperature coolant from the car's engine flows through the heater core, and the air blown by the blower also passes through the heater core, allowing warm air to blow out from the air conditioning vents. 2. The cooling principle of car air conditioning is slightly more complex. After pressing the AC button, the compressor clutch engages, enabling the engine to drive the compressor. The compressor continuously compresses the refrigerant and sends it to the evaporator.

19

3

Share

Is There a Toll on Highways During Mid-Autumn Festival?

During the Mid-Autumn Festival, tolls are required for highway travel. Below are the specific details about highway travel during holidays: 1. Toll: Normal tolls apply during New Year's Day, Dragon Boat Festival, and Mid-Autumn Festival. 2. Free: Highways are toll-free during the Spring Festival, Qingming Festival, May Day Labor Day, and National Day. Here is additional information about highway travel for vehicles: 1. Pure Electric Vehicles: Pure electric vehicles must meet the following conditions to travel on highways: The pure electric vehicle should be produced by a legitimate manufacturer and possess relevant qualifications such as the vehicle registration certificate and certificate of conformity issued by national quality supervision departments. The vehicle must have a special new energy vehicle license plate and a motor vehicle driving license issued by the traffic management department. The vehicle's maximum speed must meet the highway speed requirements. 2. Highway Travel Conditions: On highways within our province, drivers must hold a C2 or higher driver's license. The vehicle must be a motor vehicle registered with the traffic management department of the public security authority. Temporary travel permits should be obtained for temporary road use, and the vehicle must display the motor vehicle license plate, inspection qualification mark, insurance mark, and carry the motor vehicle driving license.

16

0

Share

How to Turn on Both Front and Rear Fog Lights Simultaneously?

Generally, with a stalk-type light controller, turning the fog light switch up one notch will activate the front fog lights, while turning it up two notches will turn on both the front and rear fog lights simultaneously. Here’s how to use fog lights properly: 1. Fog lights have strong penetration and can somewhat rival high beams. However, they should not be used in non-foggy or non-rainy conditions, as they may affect other drivers and compromise road safety. 2. When encountering heavy rain or thick fog with low visibility, drivers must turn on their fog lights. If visibility drops below 100 meters, failing to activate the rear fog lights increases the risk of rear-end collisions, leading to unnecessary losses. 3. During foggy or rainy conditions, avoid using high beams. While high beams illuminate distant areas at night, they are ineffective in dense fog. The light from high beams scatters due to diffusion, impairing the driver’s vision. If visibility is extremely poor, it’s best to avoid driving altogether.

15

0

Share

Cold Air or Warm Air for Windshield Fogging?

If you are defogging in winter, you need to use warm air. If you are defogging in summer, you need to use cold air. Here are some related tips: 1. When defogging, it is recommended to turn on the external circulation mode. This can quickly expel the water vapor generated by passengers' breathing from the car, preventing the windshield from fogging up further. 2. The defogging of the front windshield relies on the air conditioning system, with air vents located below the windshield. The rear windshield defogging relies on heating wires, which are the thin lines visible on the rear windshield. The heating wires for the rear windshield will automatically turn off after a certain period to protect them, a design feature found in most cars. 3. When using the air conditioning to defog the front windshield, it is advisable to set the fan speed to maximum for quick defogging. Windshield fogging occurs due to a significant temperature difference between the inside and outside of the car. To quickly eliminate fogging, the simplest method is to roll down the windows. 4. To prevent windshield fogging, you can use anti-fog sprays, which prevent tiny water droplets from accumulating on the glass surface. Once the windshield fogs up, it is crucial to defog it quickly to avoid obstructing the driver's view, which could lead to accidents. When fogging occurs, reduce your speed and carefully observe the road ahead to prevent accidents.

7

0

Share

What Causes the Sizzling Sound During Cold Start of a Car?

There are mainly three reasons for abnormal sounds during cold start of a car: 1. Poor combustion: When the car does not provide sufficient power, it may produce abnormal sounds. 2. Low ignition energy leading to abnormal sounds: The first issue a car faces during cold start is low temperature. The temperature inside the engine is insufficient, and both the fuel and lubricating oil are not warm enough. Therefore, more fuel should be injected during cold start to meet the power requirements. 3. Poor fuel atomization at low temperatures: Fuel requires higher ignition energy. After prolonged use, the ignition gap of the spark plug increases, leading to a decrease in ignition energy, which affects the power performance and causes the car to produce abnormal sounds.

18

5

Share

Can I still check my driving test scores after obtaining the license?

What causes abnormal noise when stepping on the accelerator?

What causes the left side of the Audi A6 air conditioning to be cold and the right side hot?

Is There a Toll on Highways During Mid-Autumn Festival?

How to Turn on Both Front and Rear Fog Lights Simultaneously?

Cold Air or Warm Air for Windshield Fogging?

What Causes the Sizzling Sound During Cold Start of a Car?

Are There Different Specifications and Models for Antifreeze?

What is the ground clearance of the 2019 CR-V?

What are the regulations on vehicle scrapping age limits?

What is the fuel consumption of the Nissan Kicks?