Can I Schedule the Subject Three Test Right After Passing Subject Two?

1 Answers
LeDakota
07/30/25 3:43am
You can schedule the Subject Three test right after passing Subject Two. As long as you have obtained your driving study certificate for at least 30 days, which means 30 days have passed since you passed Subject One, you are eligible to schedule the Subject Three test. Even if you have just completed Subject Two, you can still schedule Subject Three as long as this condition is met. Here is some information about Subject Three: 1. Subject Three is part of the motor vehicle driver's license examination, referred to as the road driving skills and safe civilized driving knowledge test. 2. The road driving skills test generally includes: preparation before getting on the car, simulated lighting test, starting, driving in a straight line, shifting gears, changing lanes, parking by the roadside, going straight through intersections, turning at intersections, meeting vehicles, overtaking, making U-turns, and night driving. The test content varies for different types of vehicles.
Was this review help?
19
1
Share
More Forum Discussions

What grade of engine oil should be used for the Ford Kuga 1.5T?

5W-20 is the recommended engine oil grade for the Kuga 1.5T. It is best to use fully synthetic oil because the Kuga 1.5T is equipped with a turbocharged engine. The turbocharger operates under high temperatures and high rotational speeds, and without fully synthetic oil, the engine may not receive adequate protection, leading to potential damage and reduced engine lifespan. The viscosity of engine oil changes with temperature, so it is crucial to pay attention to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means the oil can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, ensuring smoother cold starts for the vehicle. The second number represents the oil's kinematic viscosity at 100°C. A higher number means the oil can maintain its viscosity better at high temperatures, which can also be understood as providing better lubrication under high-temperature conditions. The method for changing the oil in the Kuga is as follows: Wait for the engine temperature to cool down, allowing the oil to drain back into the oil pan. Use a wrench to loosen the oil drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine and let it run for about 30 seconds to allow the oil in the main oil passages to drain out. Use a specialized wrench to remove the oil filter. Apply a small amount of new oil to the oil seal of the new oil filter and tighten it clockwise by hand. Pour the new oil into the engine's oil filler cap, typically located on the valve cover. Generally, fill up to three-quarters of the oil container. Start the engine and let it run for about 5 minutes, then check for any leaks around the oil drain plug and oil filter. If leaks are found, perform necessary repairs. After stopping the engine, pull out the oil dipstick to ensure the oil level is within the standard range.
17
4
Share

How to Reset the Maintenance Light on the Refine M3

To eliminate the maintenance reminder light (wrench symbol) on the JAC Refine M3, follow these specific steps: 1. Insert the key into the ignition lock without turning it, then press and hold the button on the combination instrument panel. 2. Turn the key to the second position (ACC, where the entire vehicle is powered on). 3. Maintain the long press for ten seconds until the wrench symbol disappears. 4. The maintenance reminder light has now been reset. 5. Alternatively, you can have a professional use a diagnostic computer to eliminate it. More information about the JAC Refine M3 is as follows: 1. The JAC Refine M3 is positioned as a compact MPV model, with its overall design continuing the design philosophy of the Refine MPV family. 2. The JAC Refine M3 features an integrated bumper and a double-bar grille with chrome trim. The side profile of the Refine M3 has straight lines. 3. The front face of the JAC Refine M3 adopts a new design, with the headlights and grille integrated into one.
8
1
Share

How to Use the Gear Positions in the Tenth-Generation Accord?

The tenth-generation Accord has the following gear positions: P (Park), R (Reverse), N (Neutral), D (Drive), L (Low), and S (Sport mode). The specific usage methods are as follows: 1. To start the engine, the gear shift lever must be in the P or N position. If the lever is in a driving position such as D or R, the engine will not start. If it's not in P or N, adjust it first before starting the car. As the first gear position, P is essentially the parking gear. 2. R is the reverse gear, used when backing into a parking space. 3. N is the neutral gear, used when starting the car or waiting at a red light. 4. D is the drive gear, used when moving forward. 5. L is the low gear, typically used when driving on icy or snowy roads, in heavy traffic requiring low-speed driving, or during long downhill descents.
20
4
Share

How to Adjust the Time on Chery Fengyun 2?

Method to adjust the time on Chery Fengyun 2: After placing the car key in the ON position or starting the car, locate a small knob on the instrument panel. Rotate the knob to the right and hold it until you see the time on the dashboard flashing. Release the knob, then rotate it to the right step by step to adjust the hours and minutes. More details about the Fengyun 2 are as follows: 1. It features a revolutionary redesign in appearance, incorporating more fashionable and avant-garde elements. 2. Equipped with Chery's self-developed ACTECO 1.5L engine, the vehicle's crash performance meets the C-NCAP four-star standard. It integrates advanced technologies such as "ABS+EBD", emergency locking seat belts, optional four airbags, and side reinforcement steel anti-collision bars. 3. The interior offers a bright, fresh, and minimalist feel. The center console uses a soft-touch molding process for a plush texture. Two auxiliary meters are located on either side of the center console: the left one displays instant fuel consumption and various light indicators, while the right one shows interior and exterior temperatures and the clock, expanding the information display functionality.
17
4
Share

What is the weight of the Haval H6?

The curb weight of the Haval H6 is 1550 kilograms. More details about the Haval H6 are as follows: 1. The Haval H6 is a compact SUV under the Haval brand. 2. Its length, width, and height are 4600mm*1860mm*1720mm respectively, with a wheelbase of 2680mm. 3. It is equipped with three types of engines: a low-power version 1.5-liter turbocharged engine, a high-power version 1.5-liter turbocharged engine, and a 2.0-liter turbocharged engine. 4. The front suspension uses MacPherson independent suspension, while the rear suspension uses double-wishbone or multi-link independent suspension.
11
4
Share

How Much Discount Can You Generally Get from Car Group Buying?

Group buying comes in three forms: one is organized by the merchants themselves, another is through third-party platforms like Pacific Auto, and the third is organized by private groups. Discounts can range from a few thousand to ten or twenty thousand yuan, all of which are real savings. The exact amount of discount mainly depends on the region and the car model. Advantages of car group buying: Car group buying generally allows you to secure a price that individuals cannot get in the showroom, eliminating the need for personal connections or favors. It brings tangible benefits to consumers while also providing significant sales boosts for car dealers. It can be said that car group buying has become a trendy way to purchase vehicles, helping car enthusiasts realize their dream of affordable car buying—saving money, time, effort, and hassle!
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.