Can I Schedule the Subject 4 Exam on the Same Day After Passing Subject 3?

2 Answers
DeZoe
07/29/25 8:52pm
You cannot schedule the Subject 4 exam on the same day after passing Subject 3. You must first pass Subject 3 before you can schedule Subject 4. Below is a detailed introduction to Subject 4: 1. Overview: Subject 4, also known as the Subject 4 theory test or driver theory test, is part of the motor vehicle driver's license assessment. Currently, the Subject 3 exam consists of two parts: the road test and an additional safety and civility knowledge test, commonly referred to as "Subject 4," which evaluates "driving ethics." 2. Other Details: Subject 4 separates the requirements related to safe and civilized driving from the original Subject 1, including safe driving skills in complex conditions and emergency handling knowledge. It is conducted after the "Subject 3" practical road driving test to further assess the candidate's level of traffic awareness.
Was this review help?
7
3
Share
McLucille
08/15/25 6:31pm
On the day I passed the third driving test, I was so excited that I immediately went to the driving school front desk and asked if I could schedule the fourth test. The staff said yes, as long as the system was open. I quickly filled out the form and scheduled the test for next Friday, saving the hassle of going back and forth. Thinking about it now, booking in advance was really convenient. The fourth test is theoretical, and I managed to pass it after just a few days of using a practice app. Once I passed, I got my driver's license directly. Don’t wait too long—schedule the fourth test right after passing the third one to save time. During peak periods, the system might get crowded, so handling it early gives peace of mind. I recommend checking with your driving school about the specific rules after passing the third test. Some regions allow scheduling via mobile apps, so make sure you don’t miss the opportunity.
Was this review help?
14
5
Share
Expand All
More Forum Discussions

How to Display Tire Pressure in Lavida?

Lavida's tire pressure monitoring is automatic and will alert if there is any abnormality in tire pressure. Here is additional information: 1. The SET in the new Lavida is the tire pressure monitoring system. When the SET light is on, it indicates abnormal tire pressure, either too high or too low. 2. After changing the tire inflation pressure or replacing the wheels, turn on the ignition, press and hold the SET button of the tire pressure control system until the indicator light on the dashboard comes on. Inflate all tires to the specified pressure, then turn on the ignition. Press and hold the SET button, and the warning light on the instrument panel will illuminate. It will turn off after confirming the storage of the new parameters. 3. The tire pressure monitoring system automatically monitors the tire pressure in real-time while driving and alerts for tire leaks or low pressure to ensure driving safety.
7
3
Share

How to Handle Speeding Less Than 10%?

According to regulations, speeding within 10% of the prescribed speed limit is not subject to penalties but will result in a warning. Relevant details are as follows: 1. Penalty: Speeding between 10% and 20% above the prescribed limit incurs a fine of 50 RMB and 3 demerit points. 2. Overtaking: Vehicles speeding within 10% of the limit face no fines or demerit points. Speeding between 10% and 20% above the limit results in 3 demerit points and a 50 RMB fine. Speeding between 30% and 50% above the limit incurs 6 demerit points and a 100 RMB fine.
14
4
Share

How to Reset the Maintenance Reminder for Toyota Sienna?

Here is the method to reset the Toyota maintenance light: 1. With the ignition switch off, press and hold the "Reset" button. 2. Turn on the ignition switch. 3. Release the "Reset" button and briefly press the "Clock Adjustment" button once. 4. The maintenance cycle display will enter reset mode and return to normal after several seconds. Here is some additional information: 1. The original purpose of the car maintenance light is to remind the owner to perform maintenance as soon as possible. Therefore, the owner should promptly visit a 4S shop for maintenance. After the maintenance is completed, the 4S shop will use a diagnostic tool to reset the maintenance light. 2. The quickest and most accurate method to reset the maintenance reminder light is to use a diagnostic tool. Generally, individual car owners do not have such equipment. It is recommended to reset the light at a 4S shop after maintenance or visit an external 4S shop for resetting.
6
3
Share

How to Determine if the Generator is Broken?

Methods to determine if the generator is broken: 1. The charging indicator light on the dashboard will illuminate, and the battery power will deplete quickly; 2. The generator may produce abnormal noises or emit a burnt smell when running; 3. After starting the generator for a few minutes and then turning it off, touch the generator. If it is very hot, it may indicate a short circuit, requiring replacement. The car generator is the main power source of the vehicle, functioning to supply power to all electrical devices (except the starter) and charge the battery when the engine is running normally (above idle speed). Based on the three-phase stator winding of a standard AC generator, additional winding turns and lead-out terminals are added, along with an extra set of three-phase bridge rectifiers. At low speeds, the output is from the original and additional windings in series, while at higher speeds, only the original three-phase winding provides the output.
12
4
Share

What Causes Severe Shaking and Jerking When Starting in First Gear?

Severe shaking and jerking when starting in first gear is usually caused by uneven or deformed clutch plates, or improper clutch adjustment. Relevant information is as follows: 1. Issues: Problems with the universal joint bearing or clutch pressure plate contact. Excessive carbon buildup in the engine combustion chamber, leading to incomplete combustion and affected power output. Loose engine mounting bolts, etc. Excluding personal driving habits, shaking during first-gear starts is generally due to excessive wear of the clutch pressure plate. 2. Manual Transmission: Manual transmissions primarily transfer power through the clutch, with the clutch pressure plate responsible for transmitting kinetic energy. The clutch pressure plate has a limited lifespan. Prolonged semi-engagement or the engine operating under excessive load can accelerate wear. When the clutch pressure plate wears to a certain extent, power engagement becomes less smooth, causing the car to shake and the engine speed to become unstable.
15
3
Share

How to Handle the Violation of Passengers Not Wearing Seat Belts?

If the driver fails to use the seat belt as required, a fine of 200 yuan and 2 demerit points will be imposed; if passengers do not fasten their seat belts as required, a fine of 50 yuan will be imposed on the violator. Below is relevant information about wearing seat belts in vehicles: 1. Relevant regulations: According to 'Road Traffic Safety Violation Points Scoring Standards' IV, if a motor vehicle driver commits any of the following violations, 2 points will be deducted; driving a motor vehicle on an expressway or urban expressway without fastening the seat belt as required. 2. Other regulations: 'Road Traffic Safety Law' Article 51: When a motor vehicle is in motion, the driver and passengers shall use seat belts as required, and motorcycle drivers and passengers shall wear safety helmets as required.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.