Can I schedule the Subject 4 exam in another location through 12123?

How to Master Left and Right Distance While Driving?

Driving while looking at the rearview mirror can help you master the left and right distance. Here are some methods to master left and right distance while driving: Left tire: After adjusting your body to the normal sitting position while driving, the left tire is located between the point extending forward from the left edge of the steering wheel and a point 15 cm to the right of the A-pillar. Different cars and sitting positions may vary slightly. When finding this point, make sure to choose an empty road. Extend your gaze along the left edge of the steering wheel. If this point coincides with the white line, observe whether the rear wheel in the rearview mirror overlaps with the left white line. Continuously adjust left or right until you find the correct point, then remember this position. Right tire: Generally, when the lane line aligns with the center of the hood, the car is basically on the line. Of course, slight differences may occur due to different sitting positions and car models. At this point, you can adjust the right distance and use reference points such as the wiper or spray nozzle to remember this position.

19

1

Share

How Many Times Can You Take the Subject 3 Test?

You have five attempts to pass the driving license Subject 3 test. Here is some relevant information about the driving test Subject 3: Introduction: Subject 3 includes the road driving skills test and the safe and civilized driving knowledge test. It is part of the motor vehicle driver's license assessment and is the abbreviation for the road driving skills and safe and civilized driving knowledge test in the motor vehicle driver's test. The content of the road driving skills test varies depending on the type of vehicle you are licensed to drive. Specific test content for Subject 3: The road driving skills test generally includes: vehicle preparation, simulated lighting test, starting, driving in a straight line, gear shifting operations, changing lanes, pulling over, driving straight through intersections, left turns at intersections, right turns at intersections, crossing pedestrian crosswalks, passing school zones, passing bus stops, meeting other vehicles, overtaking, making U-turns, and nighttime driving. The safe and civilized driving knowledge test generally includes: requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations such as tire blowouts, and post-accident handling knowledge.

12

4

Share

Precautions for Using Vehicle Fire Extinguishers

Vehicle fire extinguishers are generally portable dry powder extinguishers. The usage method is as follows: Open it about 5 meters away from the burning object and tear off the small lead block. Pull out the safety pin. Press down the handle with your right hand and lift the extinguisher, then hold the nozzle with your left hand and spray the dry powder towards the burning area. Keep the fire extinguisher upright and direct the dry powder jet towards the base of the burning flame. When using it outdoors, pay attention to standing upwind and spraying. As the range shortens, gradually approach the burning area to improve fire extinguishing efficiency. Fire professionals remind car owners that vehicle fire extinguishers are essential firefighting equipment in the car and have an expiration date. They must be configured and replaced as required. When using a vehicle fire extinguisher, pay attention to the following three points: The fire extinguisher can only be used to put out initial fires. When you notice smoke or unusual odors from the car, you should use the fire extinguisher promptly. When using the fire extinguisher, do not spray it at the surface of the flame but aim at the base of the flame. Only move the extinguisher away after confirming that the flame is completely extinguished. Open the engine hood in time to locate the fire source as soon as possible.

10

5

Share

Is 16GB sufficient for a dash cam?

A 16GB memory card is generally sufficient for a dash cam. Most dash cams on the market support MicroSD cards with a maximum capacity of 32GB, with the mainstream options being 8GB, 16GB, and 32GB. 1080P resolution is essentially the standard for dash cams. Taking an 8GB memory card as an example, it can store up to 180 minutes of 1080P video, which is barely adequate. Therefore, memory cards below 8GB have largely become obsolete. Dash cams typically record in a loop, automatically overwriting the oldest footage when the TF card is full. This feature usually requires no manual configuration. In other words, when the dash cam's memory storage is full, it will automatically overwrite the oldest recordings. Dash cams allow users to set the duration of video clips, with common options being 1, 3, 5, 10, or 15 minutes. Most users opt for 3 or 5-minute clips, as this results in moderately sized files.

4

Share

What is the difference between 16-inch and 17-inch wheels?

16-inch and 17-inch wheels differ in the following aspects: Size difference: 17-inch wheels are larger than 16-inch wheels. Aspect ratio difference: Generally, larger car tires have a lower aspect ratio, so 17-inch wheels have a smaller aspect ratio compared to 16-inch wheels. Shock absorption capability difference: 16-inch wheels have thicker sidewalls, providing better shock absorption on bumpy roads than 17-inch wheels. However, 17-inch wheels offer more responsive handling at high speeds but transmit stronger road feedback on uneven surfaces with weaker shock absorption. Tire blowout probability difference: In case of a tire blowout, 17-inch wheels' larger diameter results in less body tilt, reducing the likelihood of sudden directional changes, thus making them less prone to blowouts.

1

4

Share

How to Solve Only NO Exceeding the Standard?

If the NO level in the exhaust gas is significantly exceeded, the first step is to clean the cooling system and the heat dissipation system, and even flush the lubrication system. Here are some related introductions about exhaust gas: Control the flow rate of the cleaning agent: The flow rate of the cleaning agent should be controlled to the point where the engine idles with slight vibration as the optimal condition. If the engine vibrates severely during the cleaning process, immediately reduce the flow rate of the cleaning agent. Some 4S shop technicians, aiming for speed, inject the cleaning agent into the engine at a high flow rate, which not only damages the engine but also reduces the cleaning effect. Cleaning of the three-way catalytic converter: The three-way catalytic converter should be cleaned and maintained every 30,000 kilometers, and those with the means can clean it every 10,000 kilometers. Under normal maintenance conditions, the service life of the three-way catalytic converter is between 150,000 kilometers and 200,000 kilometers before replacement is needed.

10

5

Share

Can I schedule the Subject 4 exam in another location through 12123?

How to Master Left and Right Distance While Driving?

How Many Times Can You Take the Subject 3 Test?

Precautions for Using Vehicle Fire Extinguishers

Is 16GB sufficient for a dash cam?

What is the difference between 16-inch and 17-inch wheels?

How to Solve Only NO Exceeding the Standard?

What is the fuel consumption of the 7th generation Elantra?

Are Scratch Repair Products for Car Paint Really Effective?

How to Determine the Condition of a Catalytic Converter?

Will points be deducted if there is no fire extinguisher in the car?