···
Log in / Register

Can I Schedule the Subject 2 Test at 12 PM?

4 Answers
LaGenevieve
07/29/25 7:24pm

You cannot schedule the Subject 2 test at 12 PM. Here is some relevant knowledge about Subject 2: Time limits for Subject 2: Failing to complete reversing into the garage within 210 seconds results in disqualification. Exceeding 90 seconds for parallel parking leads to disqualification. Taking your eyes off the driving direction for more than 2 seconds during driving results in disqualification. Failing to start within 10 seconds when there are no other vehicles or pedestrians affecting passage leads to disqualification. Turning the steering wheel less than 3 seconds after signaling for starting, turning, changing lanes, overtaking, or parking results in disqualification. Tips for Subject 2: After starting the engine and before moving the car, the driver should first press the clutch pedal to disengage the clutch, separating the engine from the drivetrain. Then, shift the transmission into gear and gradually release the clutch pedal to engage the clutch. During this process, the resistance torque on the engine gradually increases, so the accelerator pedal should be pressed gradually at the same time, which means progressively increasing the fuel supply to the engine. This ensures the engine speed remains at the lowest stable level without stalling.

Was this review help?
11
0
Share
SilasFitz
08/14/25 2:09pm

When it comes to scheduling the Subject 2 (driving test) appointment, I have quite a bit of experience to share. Many trainees I meet often stay up late swiping their phones, thinking they can grab a slot when the system is less busy at midnight. In reality, the traffic management platform has fixed operating hours and usually closes by 10 PM at the latest. If you try clicking "Schedule" at midnight, you’ll most likely see a system maintenance page. I’ve tried it out of curiosity before—it’s impossible to submit an application. The reliable approach is to book during the day, especially between 2 PM and 4 PM when the system is stable, and driving school staff can easily confirm the details. Besides, test slots aren’t even scheduled for nighttime, so booking a midnight slot is pointless. My advice? Set an alarm and schedule it early in the morning to avoid peak traffic hours—it’s far more practical.

Was this review help?
18
0
Share
Expand All
DeJulian
10/15/25 5:04am

When I was getting my driver's license, I looked into this timing issue. The 12123 traffic management system doesn't operate 24/7. It usually undergoes database maintenance and upgrades during early morning hours, especially between 11 PM and 6 AM when even the login page often fails to load. Even if you occasionally manage to access the booking page, a pop-up will notify you it's outside working hours when submitting. The driving test center's system syncs with this, so there's literally no one reviewing booking information at midnight. From my experience, it's best to make reservations after 9:30 AM on weekdays when the system is smoothest right after maintenance. Another trick is to pay attention to driving school group notifications - they'll immediately announce any exam schedule changes in the group, saving you the hassle of constantly refreshing the app.

Was this review help?
6
4
Share
Expand All
MacBryce
11/28/25 5:56am

Scheduling for Subject 2 requires consideration of both system availability and venue arrangements. The traffic management platform's reservation service is typically open from 7:00 AM to 10:00 PM, with data synchronization and maintenance occurring overnight. Examination venues, however, only schedule tests during daytime hours and remain closed at night. This means that even if the system technically permits reservations during late-night hours, there are no corresponding exam slots available. In practice, it is recommended that candidates choose available time slots around 9:00 AM or 2:00 PM for scheduling, as system load is lower during these periods and conflicts with maintenance times are avoided. Additionally, be aware that the platform tends to experience slowdowns during peak periods near the scheduling deadline, so it's best to complete the operation two or three days in advance.

Was this review help?
18
4
Share
Expand All
More Forum Discussions

How to Operate the Civic's Air Conditioning?

The operation method of the Civic's air conditioning is: 1. Press the ON button to start the air conditioning, and the compressor begins working; 2. Rotate the AUTO button to control the air conditioning for both the driver and front passenger seats. The Civic's body dimensions are: length 4658mm, width 1800mm, height 1416mm, with a wheelbase of 2700mm and a fuel tank capacity of 47 liters. The Civic is equipped with a 1.0L turbocharged engine, delivering a maximum horsepower of 125PS and reaching peak power at 5500rpm. It is paired with a continuously variable transmission (CVT). The front suspension adopts a MacPherson strut independent suspension, while the rear suspension features a multi-link independent suspension.
20
4
Share

What is the 0-100 km/h acceleration time for the Sylphy?

According to official data, the Sylphy is available in three engine variants: 1.2L, 1.6L, and 1.8L. The 1.2L model accelerates from 0-100 km/h in 8.63 seconds, the 1.6L model in 12.1 seconds, and the 1.8L model in 11.4 seconds. Official data shows that the 1.4T variant of the Yidong accelerates from 0-100 km/h in 9.2 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time include: Torque: Torque, in simple terms, represents the strength of the force. The greater the torque, the stronger the force pushing the vehicle, resulting in faster acceleration. The maximum torque of the Verano is 250 Nm, with a 0-100 km/h acceleration time of 7.7 seconds. The Sylphy 1.6L has a torque of 174 Nm, with a 0-100 km/h acceleration time of 12.1 seconds. Transmission efficiency: The transmission, as the medium for power delivery, inevitably involves power loss. Higher transmission efficiency leads to better acceleration performance. Generally, the ranking of transmission efficiency is as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Sylphy 1.6L is equipped with a CVT transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit: Hp/T). A higher power-to-weight ratio results in faster acceleration. The Verano has a power-to-weight ratio of 137 Hp/T, with a 0-100 km/h acceleration time of 7.7 seconds. The Sylphy 1.6L has a power-to-weight ratio of 109 Hp/T, with a 0-100 km/h acceleration time of 12.1 seconds.
16
5
Share

Why is the BMW X5 car key not responding?

Here are the specific reasons why the BMW X5 car key is not responding: Remote lock failure: It is very likely that the remote lock is malfunctioning or factors such as aging of the car's remote transmitter antenna are causing the remote key to not work. In this case, you can use the spare mechanical key to lock the car. Signal interference: There is strong magnetic signal interference around the car. Since the smart key uses low-intensity radio waves, it cannot function properly under magnetic interference. LED display screens, radio monitoring equipment, walkie-talkies, infrared anti-theft alarms, high-voltage lines or substations, etc., may all generate interference to the remote key, with an interference range of 30 meters to 100 meters.
5
4
Share

What is the fuel consumption per 100 kilometers for the Jetta Pioneer?

Jetta Pioneer generally consumes 8 to 9 liters of fuel per 100 kilometers. Lightly press the accelerator: When the car starts at low speed, it is the peak fuel consumption area. Therefore, lightly pressing the accelerator during startup to prevent excessively high RPM can effectively reduce fuel consumption. Avoid high RPM: Try to avoid unnecessary high RPM as fluctuating engine speeds can significantly increase fuel consumption. Regular maintenance: Change the engine oil and remove carbon deposits. Avoid emergency braking: Anticipating road conditions in advance not only improves driving safety but also saves fuel. For example, gradually slowing down before traffic lights and utilizing inertia to coast.
16
2
Share

How Long is the Original Factory Warranty for Audi?

Audi's original factory warranty covers 3 years or 100,000 kilometers. Different components have different warranty periods: Generally, different parts and components have varying warranty periods. For example, fast-wearing components like batteries, air filters, cabin air filters, and timing belts typically have shorter warranty periods. Wear-and-tear parts are not covered by the warranty: The Maintenance Manual usually specifies that wear-and-tear parts such as tires, brake pads, clutch plates, window glass, wiper blades, and headlights are not covered by the warranty. These components are considered functional at the time of vehicle delivery and are expected to wear out naturally over time. Subsequent issues are usually due to accidents or human damage.
1
2
Share

Where is the engine speed sensor located on the new Passat?

The engine speed sensor on the new Passat is located at the connection point between the engine flywheel and the transmission. Function of the speed sensor: The engine speed sensor detects the engine speed, determines the position of the crankshaft, and detects signals for the top dead center of the piston and the crankshaft angle. These detected signals are then transmitted to the ECU to control ignition timing and fuel injection timing. Working principle: The engine speed sensor and the camshaft position sensor have similar structures and working principles. They work in coordination to ensure the engine operates properly. They are usually installed together, typically within the distributor, on the clutch housing of the transmission, or at the front or rear end of the crankshaft. A pulse signal-type speed sensor is used to measure the engine speed.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.