···
Log in / Register

Can I schedule my vehicle inspection in advance?

4 Answers
ValerieFitz
08/28/25 5:12am
Yes, you can conduct your annual vehicle inspection in advance. The vehicle can undergo inspection application within 3 months prior to the scheduled inspection date, with the recommendation being 2 months or slightly over 1 month in advance. Below are the inspection steps: 1. Pay the inspection fee at the payment window and wait for your turn. Before the inspection, staff will conduct a preliminary check, mainly verifying if the engine number matches the vehicle license, followed by a brief visual check of the exterior and vehicle condition, then filling out an emission test form. During the inspection, a technician will drive the vehicle onto the testing line. Upon passing the emission test, you can collect the emission compliance sticker at the window. If it fails, adjustments at an auto repair shop are needed before retesting, which requires paying the fee again. 2. At the inquiry window, obtain and fill out the 'Motor Vehicle Regular Inspection Registration Form,' which can be collected with your vehicle license. After filling out the form, staff will check for any traffic violations. If there are no issues, the form will be stamped with 'Verified, ready for inspection.' If there are violations, handle them promptly with the violation notice. 3. Pay a deposit at the deposit window, keep the deposit receipt, and obtain and fill out the exterior inspection form. Take this form to the exterior inspection station where relevant documents are checked first, including verifying if the third-party insurance (compulsory insurance) is valid. The exterior inspection begins after document verification. 4. The testing line checks brakes, headlights (high beam), chassis, etc., taking about 5-10 minutes. After the vehicle is driven off the line, you'll receive a computer-printed form listing items like brakes, lights, horn, etc. Passed items are marked '0,' failed ones with 'X.' Commonly, lights and brakes may fail. Not to worry, inspection sites have facilities to adjust these. After brake adjustments, a retest is needed, but for lights, just a stamp after adjustment suffices. 5. Bring a copy of your ID card to the main inspection hall for signing and stamping.
Was this review help?
10
1
Share
StDamian
09/10/25 3:37am
I drive a lot and frequently go through annual inspections. Recently, online appointment booking became available, allowing you to get it done in advance. Simply download the official app or register on the website, enter your license plate number and ID information, then select a date and time to book an appointment—usually up to a month or more in advance. Booking early is a real time-saver, avoiding long queues during peak hours, especially on hot or rainy days when waiting outside is miserable. Before booking, I always check basic items like lights, brakes, and tire pressure to ensure everything’s in order and avoid rejection. Remember to bring your original vehicle license and compulsory insurance policy to avoid a wasted trip. Overall, pre-booking inspections online is convenient and efficient—I highly recommend giving it a try.
Was this review help?
14
3
Share
Expand All
VanViolet
10/24/25 4:28am
Handling your car's annual inspection is a breeze, and you can easily book it online in advance! Just use a mobile app, enter your license plate number to log in, and pick a preferred date weeks ahead—super flexible and convenient. This way, you avoid wasting time in long queues at the inspection site and can schedule it during your free time after work or on weekends. The app even has an auto-reminder feature, notifying you a day before to bring your documents. Booking early saves me so much hassle and eliminates scheduling stress. Pro tip: Check minor issues like lights and wipers beforehand to ensure a smooth inspection. The whole process takes just minutes—perfect for busy young professionals.
Was this review help?
4
2
Share
Expand All
CaydenDella
12/07/25 4:52am
As a long-time car owner, I can confirm that pre-booking vehicle inspections online is completely feasible. You just need to make an appointment through the official platform, and you can easily set a date about two weeks in advance, arriving at the inspection station on time to avoid waiting troubles. I personally experienced the chaos of not having an appointment and now always book online early. Planning ahead has many benefits, such as avoiding missing the expiration date or getting fined, and you can also prepare your documents during free time to prevent omissions. Vehicle condition checks are also important; ensure all signal lights are working properly beforehand to pass the inspection in one go. This method is efficient and safe, worth adopting by every car owner.
Was this review help?
13
4
Share
Expand All
More Forum Discussions

What are the reasons for the Audi A3 turn signal not working?

The possible reasons for the Audi A3 turn signal not working include circuit breakage, flasher relay failure, excessive contact gap, and other factors. Solutions for the Audi A3 turn signal not working: Open the flasher relay cover and check if the coil and resistor are intact. If the resistor heats up and the contacts cannot close, you can directly press the movable contact. If the turn signal lights up at this time, it indicates a relay fault. If the contact gap is too large, it should be adjusted. Common faults of turn signals: When turning on the left or right turn signal or hazard light, the turn signal does not work. When turning on the left or right turn signal individually, the flashing frequency of the left and right turn signals is inconsistent.
10
0
Share

What does the P001200 fault code in GAC Trumpchi mean?

GAC Trumpchi reporting the P001200 fault code indicates that the intake VVT is not in the default position during startup. This fault is occasional and may sometimes cause difficulty in starting. It can be confirmed that there is an issue with the intake camshaft VVT adjustment solenoid valve. Meaning of P001200: It refers to a fault in the camshaft sprocket. It does not need to be locked in a fixed position. The main manifestations include difficulty in starting and poor acceleration. In severe cases, the engine may not start at all, which is likely caused by engine oil. It is recommended to first change the engine oil at a 4S shop and then perform a computer check on the solenoid valve. Hazards of damaged camshaft intake and exhaust sprockets: If the camshaft adjustment wheel is not replaced, there may be no immediate issues, but the problem will gradually worsen over time, leading to engine stalling and inability to restart. The ultimate consequence could be excessive timing adjustment error, timing disorder, timing chain breakage, resulting in piston-to-valve contact and engine failure.
10
3
Share

How to adjust the time on Besturn B50?

Turn on the audio system, then press and hold the CLOCK button below the CD (for about 3 seconds) to start adjusting. Below is some related information about the Besturn B50: 1. Exterior: The Besturn B50 is a car independently developed by FAW Car. In terms of appearance, the Besturn B50's headlights utilize light guide technology, and the dynamic dual waistlines give the side profile of the new Besturn B50 a balanced and stable look. The standard new two-tone surface-brushed 16-inch aluminum alloy wheels enhance the vehicle's sporty feel, making the new Besturn B50 more fashionable and youthful. 2. Safety Performance: In terms of safety, it features a newly added cornering assist lighting system. This system automatically controls the cornering lights (front fog lights) based on changes in driving conditions and vehicle status to improve driving safety and comfort. Additionally, it includes new safety features such as a reminder for the front passenger seatbelt, anti-whiplash seats, hidden airbags throughout the vehicle, central locking, and headlight level adjustment.
8
1
Share

How many liters of transmission fluid does the 2013 Mondeo require?

The 2013 Mondeo requires 9L of transmission fluid for a refill. Symptoms of deteriorated transmission fluid in the Ford Mondeo: 1. Slipping and oil leakage: Accompanied by increased engine RPM, lack of power when climbing hills, and delayed acceleration. Aging transmission seal strips or deformed sealing gaskets may be the cause. 2. Jerking and abnormal noises: Vehicle vibration, gearshift jerking, possibly due to clogged valve body from contaminated transmission fluid. Deteriorated transmission fluid can also cause abnormal noises in the car. 3. Overheating and stalling: A transmission overheating warning light will appear on the dashboard. The engine may stall when shifting from P to D gear. Possible malfunctions include the solenoid valve, lock-up control valve, or input shaft speed sensor.
11
5
Share

How Long Can a Bulging Tire Last?

It cannot continue to be used. Continuing to drive with a bulging car tire can easily lead to a blowout, endangering driving safety. Below is relevant information about tire bulging: 1. Causes of tire bulging: Apart from installation and manufacturing issues, most tire bulging occurs due to unexpected impacts with obstacles (such as potholes) during use, causing localized breakage in the tire wall's cord layer. 2. Classification of bulging phenomena: Generally, most bulging tires are from the 60 series and below in aspect ratio, and the lower the aspect ratio, the more likely bulging occurs; imported tires with large specifications and low aspect ratios account for a higher proportion of bulging cases.
12
4
Share

How to Solve Fogging on the Outside of Car Windshield in Summer?

Solutions for fogging on the outside of car windshields in summer: 1. Open windows for airflow: Crack open the side windows slightly to allow air convection inside the car. When the interior temperature approaches the outside temperature, the fog will dissipate. 2. Use air conditioning for defogging: Press the A/C button (which stands for air conditioning cooling), lower the temperature, activate the window defogging function, and set the fan speed to maximum. As the moisture on the window surface evaporates, the glass temperature will quickly drop, achieving the defogging effect. 3. Use defogging spray: The principle of defogging spray is to apply a protective film on the windshield by spraying a layer, which effectively prevents fogging.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.