Can I retake the Subject 4 test immediately if I scored 86 points?

1 Answers
KarterRose
07/30/25 12:15am
You can retake the test on the same day. If you fail both attempts, you can apply for a retest after 10 days. There is no limit to the number of retakes, and each retake offers two test opportunities. Subject 1: Also known as the theoretical test or driver's theory test, it is part of the motor vehicle driver's license assessment. The test content includes driving theory basics, road safety laws and regulations, local regulations, and related knowledge. The test format is computer-based, consisting of 100 questions, with a passing score of 90 or above. Subject 2: Also known as the small road test, it is part of the motor vehicle driver's license assessment and refers to the field driving skills test. For small vehicles (C1, C2), the test items include five mandatory components: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and curve driving (commonly known as the S-curve). Subject 3: Includes the road driving skills test and the safe and civilized driving knowledge test. It is part of the motor vehicle driver's license assessment and refers to the road driving skills and safe and civilized driving knowledge test for motor vehicle drivers. The content of the road driving skills test varies depending on the type of vehicle being licensed.
Was this review help?
6
5
Share
More Forum Discussions

What Causes Black Smoke Emission?

The causes of black smoke emission are: 1. Excessively rich air-fuel mixture; 2. Use of incorrect engine oil grade; 3. Malfunctioning oil pump supplying excessive oil; 4. Damaged crankshaft oil seal in two-stroke engines; 5. Severely worn oil ring in piston rings of two-stroke engines, allowing oil to enter combustion chamber; 6. Overfilled engine oil in four-stroke engines, causing excessive oil to enter combustion chamber; 7. Damaged cylinder gasket in water-cooled engines, allowing coolant to enter cylinder and affecting normal combustion. Solutions for black smoke emission from automotive engines include: 1. Using high-quality fuel or fuel additives; 2. Regularly cleaning fuel lines; 3. Maintaining clean air filters and replacing them periodically; 4. Promptly replacing damaged fuel filters and solenoid valves.
5
4
Share

Does removing and reinstalling the bumper have any impact?

Removing and reinstalling the bumper has no impact, provided that no excessive force is used during the removal. Below are the components and functions of the bumper: Components of the bumper: A plastic bumper consists of three parts: the outer panel, cushioning material, and crossbeam. The front and rear bumpers of a vehicle not only maintain their original protective function but also strive for harmony and unity with the vehicle's body design, as well as lightweight construction. Functions of the bumper: The plastic bumper provides strength, rigidity, and aesthetic appeal. From a safety perspective, it acts as a buffer during collisions, protecting the front and rear body of the vehicle. From an appearance standpoint, it seamlessly integrates with the vehicle body, forming a unified whole, and serves as an important decorative component for the vehicle's exterior.
18
5
Share

What is the appropriate speed for downshifting from fourth gear to second gear?

When downshifting from fourth gear to second gear, the speed should be reduced to around 30 km/h. First gear serves as a buffer gear; after a smooth start, slightly press the accelerator and then shift to second gear, which must be completed within 50 meters during the test. For second gear, if the speed exceeds 20 mph, you can shift to third gear, which must be completed within 150 meters during the test. Third gear is commonly used at speeds above 20 mph and below 40 mph, while fourth gear is engaged when the speed reaches 40 mph. Reasons for gearshift jerking: The engine speed does not match the current vehicle speed, meaning there is a speed difference between the engine speed and the clutch plate speed. Solutions for gearshift jerking are as follows: Adjust the gearshift speed; adjust the gear engagement sequence; shorten the gearshift time; lightly press the accelerator when shifting gears.
8
0
Share

What is the Scoring Standard for Hill Start?

Hill start scoring standard: If the vehicle's bumper is not aligned with the pole line and exceeds 50 centimeters forward or backward, 100 points will be deducted; if the vehicle rolls back more than 30 centimeters during start, 100 points will be deducted; if the vehicle's bumper is not aligned with the pole line but does not exceed 50 centimeters forward or backward, 20 points will be deducted; if the vehicle body is not parked close to the side and stops within 30 centimeters of the right line, 20 points will be deducted; if the vehicle rolls back less than 30 centimeters during start, 20 points will be deducted. Hill start techniques: Use the handbrake simultaneously during hill start; fully depress the car's clutch; maintain an optimistic attitude. Correct steps for hill start: On the slope, pull up the handbrake, press the clutch with your left foot, and shift the car into first gear; slowly and gently lift your left foot to release the clutch while pressing the accelerator with your right foot, feeling the car's forward momentum.
20
1
Share

Has the Hill Start Been Cancelled?

The "Hill Start and Stop" test item has been removed from the Category 2 driving test for small automatic transmission vehicles. After entering the vehicle, candidates should first adjust the seat, rearview mirrors, and fasten the seatbelt. Maintain a comfortable and fixed sitting posture, leaning back against the seat with hands naturally placed on the steering wheel, ensuring the distance is neither too far nor too close. Time limit for hill start: Must not exceed 30 seconds. Hill stop: Upon hearing the "hill stop" instruction (approximately 20 meters from the pole), turn on the right turn signal, steer appropriately to the right to align the vehicle slowly along the right side of the road, and pay attention to the distance between the vehicle body and the right sideline. Hill start scoring criteria: 100 points deducted if the vehicle bumper is not aligned with the pole line and exceeds 50 cm forward or backward; 100 points deducted if the vehicle rolls back more than 30 cm during start; 20 points deducted if the vehicle bumper is not aligned with the pole line but does not exceed 50 cm forward or backward.
18
1
Share

What are the speed limit regulations for urban lanes?

Motor vehicles driving on the road must not exceed the speed indicated by speed limit signs or markings; for urban roads with two or more motor vehicle lanes in the same direction and without speed limit signs or markings, the maximum speed is 70 km/h, while for closed motor vehicle-only roads and highways, the maximum speed is 80 km/h. Highway speed regulations: The speed of small passenger vehicles must not exceed 120 km/h, other motor vehicles must not exceed 100 km/h, motorcycles must not exceed 80 km/h, and must not be lower than 60 km/h. Traffic light speed regulations: There is no speed limit when approaching traffic lights or pedestrian crossings, but the speed must not exceed the road's speed limit; if the traffic lights are at road intersections or turns, the speed must not exceed 30 km/h. Generally, it should be between 30 to 60 km/h.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.