Can I replace 55w car lights with 100w?

1 Answers
DiMaria
07/29/25 8:08pm
It is not advisable to replace 55w car lights with 100w. You should not install bulbs that exceed the original wattage because the vehicle's electrical circuits and components are designed specifically for 55w. Using higher-wattage bulbs for extended periods may cause the system to be overloaded or lead to component failure, which can result in damage or malfunction and is also unsafe. The functions of car lights are: 1. Activating turn signals to alert trailing vehicles and reduce rear-end collisions; 2. Improving visibility of road conditions to enhance driving safety; 3. Informing following vehicles that you are braking, prompting them to slow down; 4. Turning on hazard lights during emergencies or in poor visibility conditions to alert other vehicles.
Was this review help?
5
3
Share
More Forum Discussions

What engine does the Malibu XL use?

The Malibu XL offers two models, equipped with a 1.3T turbocharged engine and a 2.0T turbocharged engine respectively. Here are the details: 1. In terms of power, the 1.3T engine delivers a maximum power of 121 kW and a maximum torque of 240 Nm, while the 2.0T engine provides a maximum power of 177 kW and a maximum torque of 350 Nm. 2. For transmission, the 1.3T model is paired with a CVT continuously variable transmission, and the 2.0T model is matched with a 9-speed automatic manual transmission. 3. Regarding the interior, the Malibu XL features extensive use of soft materials and chrome decorations, offering a refined and upscale feel. It comes standard with an 8-inch central control screen, and higher-end models are equipped with an 8-inch LCD instrument panel, emphasizing simplicity and practicality in the interior design.
18
0
Share

Components and Functions of the Cooling System

Components and Functions of the Cooling System are as follows: I. Components of the Cooling System: The cooling system consists of the thermostat, water pump, water pump belt, radiator, cooling fan, water temperature sensor, liquid storage tank, heating device, expansion tank, water jackets in the engine block and cylinder head, etc. II. Functions of the Cooling System are as follows: 1. Adjust the cooling intensity in real-time based on the engine's load, speed, and temperature changes. 2. Provide different cooling intensities for different working parts of the engine. 3. Dissipate the heat generated during engine operation into the air and ensure the engine operates within an appropriate temperature range. The cooling system must prevent both engine overheating and excessive cooling during winter. After a cold start, the cooling system also ensures the engine warms up quickly to reach the normal operating temperature as soon as possible.
6
4
Share

What should you do when encountering a stop signal ahead while driving a motor vehicle?

When encountering a stop signal ahead while driving a motor vehicle, stop in sequence behind the stop line. If there is no stop line, stop before the intersection. Below are additional details: 1. Roundabouts: Vehicles preparing to enter the roundabout must yield to vehicles already inside the roundabout. 2. Left turns: When making a left turn, turn from the left side near the center of the intersection. Turn on the turn signal when turning and use low beams when driving at night. 3. Right turns with same-lane vehicles waiting for a go signal: When making a right turn and encountering vehicles in the same lane waiting for a go signal, stop and wait in sequence. 4. Intersections without directional signal lights: At intersections without directional signal lights, turning motor vehicles must yield to straight-moving vehicles and pedestrians. Right-turning vehicles from the opposite direction must yield to left-turning vehicles.
17
0
Share

What is the reason for the constant illumination of the turn signal on the Bestune B70?

The constant illumination of the turn signal on the Bestune B70 may be due to a faulty relay or a loose connection in the wiring. Faulty relay: You can replace the fuse inside the relay. A relay is an electrical control device that causes a predetermined step change in the controlled quantity in the electrical output circuit when the change in the input quantity meets specified requirements. Relays have both a control system and a controlled system and are commonly used in automated control circuits, where they play roles such as automatic regulation, safety protection, and circuit switching. Loose connection in the wiring: Another possible cause for the constant illumination of the turn signal is a loose connection in the wiring. Pay attention to the fact that some flashers have directional wiring; if the two wires are connected inversely, the light may stay on constantly. In such cases, simply swap the two wires of the new flasher.
8
2
Share

What is the heat-resistant temperature of tires?

Dry tires have an optimal operating temperature range between 90 and 110 degrees Celsius, and tire warmers are always maintained within this optimal range. Relevant information is as follows: 1. Overheating: Additionally, tires should not overheat, as excessive temperatures can turn wet tires into old dry tires. Driving speed The faster a tire travels, the quicker it generates heat, the higher the temperature rises, and the greater the impact force it experiences, with both factors being proportional. Therefore, at high speeds and high temperatures, tire tread wears out faster, so it's advisable to choose a reasonable speed for driving. 2. Tire blowout: In summer, road surface temperatures often exceed 70°C. Cars driving for long periods in hot summer conditions, especially those with damaged or weak spots in their tires, are prone to blowouts due to excessive tire pressure. Experts point out that due to temperature effects, the gas inside tires automatically expands, increasing tire pressure from 2.3 kg to over 3 kg. To ensure proper tire pressure, it is recommended to fill tires with nitrogen in summer, and the filling pressure should be reduced by 10%.
7
4
Share

How to Drive an Automatic Transmission Car Through Deep Water?

When driving through water, try to avoid stopping, accelerating, shifting gears, or releasing the throttle. If the car stalls in the water, do not restart it immediately. Instead, take measures to move the car out of the flooded area. Below are some key points about vehicle water fording: 1. Introduction: This refers to driving a vehicle on low-lying, waterlogged roads, essentially passing through water. It commonly occurs during rainy weather in low-lying areas where poor drainage causes road flooding. 2. Reasons for stalling: The high-voltage ignition system may get wet or short-circuited due to water ingress, causing the engine to stall. This is a frequent occurrence where vehicles stall despite appearing to pass through shallow water, often due to water splashing. 3. Potential hazards: Dead branches, leaves, and discarded plastic bags can wrap around bearings and suspension components, creating safety risks.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.