Can I rent a car without a driver's license?

What Causes the Engine Fault Yellow Light to Stay On?

When the engine yellow fault light is on, it means a warning, indicating that some system parameters of the car may exceed the set range. At this time, the car can continue to drive, but some functions may be limited. The engine fault light can also be red. When the red fault light is on, it means prohibition. At this time, the car must stop immediately, turn off the engine, and prohibit continued driving, and check where the fault occurred. There are mainly the following 7 reasons for the engine fault light to stay on: Sensor failure: The sensors mentioned here include water temperature, crankshaft position, air flow, intake temperature, oxygen sensor, etc. When these sensors are damaged, have poor contact, or signal interruption, the car's ECU cannot accurately obtain engine data, which will cause the engine fault light to come on. Oil quality issues: If fuel and engine oil are not added according to the manufacturer's requirements, it may cause engine wear and trigger the fault light. Poor combustion of the air-fuel mixture: Poor combustion of the air-fuel mixture can lead to engine carbon deposits or knocking. After being detected by the oxygen sensor and reported to the ECU, the fault light will come on as a warning. Spark plug failure, ignition coil failure, fuel pump failure, and fuel line blockage can all cause poor combustion of the engine air-fuel mixture. Turbocharging issues: The intake boost pipeline and turbocharger can also cause the engine fault light to come on. The most common is turbocharger damage, accompanied by symptoms such as oil leakage, high oil consumption, reduced power, metal noise, and blue or black smoke from the exhaust pipe. Intake issues: If there is a problem with the car's intake, it may cause engine pipeline blockage, and in severe cases, trigger the engine fault light. A dirty air filter that is not cleaned regularly can lead to intake problems. Exhaust issues: Exhaust faults can also cause the engine fault light to come on. The rear oxygen sensor, three-way catalytic converter, exhaust camshaft, and bearing failure are all causes of exhaust problems, with the three-way catalytic converter being the most common. Using leaded gasoline, lead or silicon-based lubricant additives, physical damage to the three-way catalytic converter, and engine fuel supply system faults can easily cause three-way catalytic converter failure. Anti-theft system failure: If the car's electronic anti-theft system fails, or the anti-theft controller does not match the engine electronic controller, the anti-theft system can also cause the engine to malfunction and trigger the fault light. If the engine fault light is on, you can follow these steps: First, check if the engine is running normally and if there are any issues like shaking or smoke. If so, try not to restart the engine. Especially note that if the red light is on, do not restart the engine. If the engine can be started, turn it off for 5-10 minutes, then without pressing the brake, press the start button once or turn the key halfway to the 'on' position without pressing the clutch. The car will perform a self-check after powering on. Wait for 5-10 seconds and observe if the fault light on the dashboard turns off. If the fault light does not turn off, please visit a service station as soon as possible to identify the cause. The service station can use a portable diagnostic tool to read the fault code, obtain fault information, and perform targeted repairs.

17

5

Share

What is DOHC?

DOHC (Double Overhead Camshaft) refers to dual overhead camshafts in Chinese. More details about dual overhead camshafts are as follows: 1. Function: Dual camshafts can adjust valve overlap angle, thereby delivering greater horsepower. However, they tend to produce insufficient torque at low RPMs and may pose certain maintenance difficulties due to their complex mechanical structure. 2. Origin: The dual camshaft technology originates from racing cars, primarily designed to control the timing difference between intake and exhaust valves.

7

3

Share

What is the Chinese name for Honda Inspire?

Honda Inspire is named 'Inspire' in Chinese, and it is a mid-size car under Dongfeng Honda. This model is a sister car to the Honda Accord. Here is more information about the Honda Inspire: 1. Engine: The Honda Inspire is available in pure gasoline and hybrid versions. The pure gasoline version is equipped with a 1.5-liter turbocharged engine, while the hybrid version uses a 2.0-liter naturally aspirated engine. 2. Suspension: The front suspension of the Honda Inspire uses a MacPherson independent suspension, and the rear suspension uses a multi-link independent suspension.

9

3

Share

How to Remove the Small Round Mirror Stuck on the Car Rearview Mirror?

Here are the methods to remove the small round mirror from the rearview mirror: 1. Soak the adhesive around the small round mirror with alcohol; 2. Use a hairdryer to blow hot air, and the small round mirror will fall off. Below are the functions of the small round mirror: 1. It allows the driver to better observe the side of the car body and the rear wheels while sitting in the car, reducing the risk of accidents; 2. It helps in better mastering the road conditions when parking or reversing; 3. It enables drivers who frequently drive on mountain roads, rugged paths, and narrow sections to more effectively adjust the distance between the right side of the car body and the road.

1

0

Share

What car is represented by a plus sign and a snake?

A plus sign and a snake represent the Alfa Romeo car. Taking the Alfa Romeo Giulia as an example, it is a mid-size sedan with the following dimensions: length 4643 mm, width 1860 mm, height 1438 mm, wheelbase 2820 mm, fuel tank capacity of 58 liters, and trunk capacity of 480 liters. The Alfa Romeo Giulia is equipped with a 2.0T turbocharged engine, delivering a maximum power of 206 kW and a maximum torque of 400 Nm, paired with an 8-speed automatic transmission. It features a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear.

10

0

Share

What are the functions of an exhaust pipe?

The functions of a car exhaust pipe are: 1. To expel the exhaust gases produced after engine combustion; 2. To reduce vibration and noise, thereby extending the lifespan of the exhaust muffler system. The maintenance methods for a car exhaust pipe are: 1. Avoid water entering the muffler when driving in the rain or washing the car; 2. Regularly clean the dirt inside the exhaust pipe and apply rust-proof oil. The causes of abnormal noise in a car exhaust pipe are: 1. The air-fuel mixture is too rich, and unburned mixture enters the exhaust pipe and backfires upon encountering fresh air; 2. Poor valve sealing leading to incomplete combustion.

4

0

Share

Can I rent a car without a driver's license?

What Causes the Engine Fault Yellow Light to Stay On?

What is DOHC?

What is the Chinese name for Honda Inspire?

How to Remove the Small Round Mirror Stuck on the Car Rearview Mirror?

What car is represented by a plus sign and a snake?

What are the functions of an exhaust pipe?

What are the precautions for purchasing a new car?

Is a Power of Attorney Required for Out-of-Province Vehicle Annual Inspection?

How many kilometers can the XPeng G3 electric vehicle run?

Can Running a Red Light with Temporary License Plates Be Captured?