Can I Renew My Driver's License One Month in Advance?

1 Answers
NolanLynn
07/29/25 10:55pm
You can renew your driver's license one month in advance. The motor vehicle driver should apply for renewal at the vehicle management office of the issuing authority within 90 days before the expiration of the motor vehicle driver's license. When applying, you should fill out the "Motor Vehicle Driver's License Application Form". The renewal and inspection must meet the following conditions: Holders of a large passenger vehicle, tractor, city bus, medium-sized passenger vehicle, or large truck driver's license have no points recorded in the current scoring cycle, or holders of other permitted vehicle-type driver's licenses have points recorded in the current scoring cycle but not reaching 12 points; Holders of a large passenger vehicle, tractor, city bus, medium-sized passenger vehicle, or large truck driver's license who have points recorded in one scoring cycle, as well as holders of other permitted vehicle-type driver's licenses who have been involved in a traffic accident causing death and bear equal or greater responsibility but have not had their motor vehicle driver's license revoked, and have participated in the inspection education; The applicant has no outstanding road traffic safety violations or traffic accidents; The applicant's physical condition meets the driving permit conditions; The motor vehicle driver's license is not under circumstances of being legally seized, detained, temporarily suspended, revoked, canceled, or annulled.
Was this review help?
5
2
Share
More Forum Discussions

What is the fuel consumption of the Mitsubishi Galant 2.4?

The average fuel consumption of the Mitsubishi Galant 2.4 is 11.7 liters per 100 kilometers. Methods to determine fuel consumption: You can calculate a car's fuel consumption using the dashboard. First, when the fuel in the tank drops to the red light, record the odometer reading. Then, go to the gas station to refuel and record the amount of fuel added. Continue driving until the fuel tank reaches the red light again. At this point, subtract the previously recorded odometer reading from the current reading and divide the fuel consumption by this distance. Factors affecting fuel consumption: A car's fuel consumption is closely related to the vehicle itself. For example, tire pressure or severe tread wear can affect it. Additionally, the quality of the engine oil and the driver's driving habits also play a role.
1
0
Share

What Causes the Fuel System in Cylinder Bank 1 of the New Jetta to Be Too Lean?

Cylinder bank 1 fuel measurement system being too lean at idle speed can be caused by issues such as carbon buildup or fuel leaks. Below are the specific reasons for a lean fuel system: Caused by insufficient fuel injection: Check if there are any issues with the fuel pressure; carbon buildup may be excessive. Carbon buildup issue: The fuel measurement system usually indicates a mixture that is either too lean or too rich. If the mixture is too lean, it is necessary to clean the intake tract carbon deposits, throttle body, and replace the fuel filter. Mixture too rich: If the mixture is too rich, check the intake system for leaks. If there are none, then the issue lies with the fuel injectors. You can perform a fuel injector atomization test or simply clean the fuel injectors.
7
5
Share

At What RPM Should You Shift Gears in a Manual Transmission?

Manual transmission vehicles should generally shift gears around 2000 RPM. During driving, the ideal RPM for shifting is not fixed. If aiming for fuel economy, shifting between 1500 to 1800 RPM is recommended. For lower gears, it's appropriate to increase the RPM to around 2000 before shifting. The reason for higher RPM in lower gears is due to the larger gear ratio. Additionally, during the break-in period, it's advisable to reduce the shifting RPM. The optimal shifting point may also vary depending on the engine type. Low-revving engines, which deliver higher torque and power at lower RPMs, can shift around 2000 RPM or even between 1500 to 1800 RPM. High-revving engines, on the other hand, require higher RPMs to reach maximum torque and power, making it more fuel-efficient to shift between 2500 to 3000 RPM.
14
3
Share

What is the body weight of the Haval H6 in jin?

The body weight of the Haval H6 is 3040 jin. As an urban SUV, the Haval H6 has broken away from the previous models' strong off-road style in terms of appearance, adopting a new design that is more likely to win the approval of the general public. The overall design is grand and stable. The body dimensions of the Haval H6 are 4600mm in length, 1860mm in width, and 1720mm in height, with a wheelbase of 2680mm. The Haval H6 features front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of double-wishbone independent suspension. The Haval H6 is equipped with a 1.5T turbocharged engine, which has a maximum power of 110 kilowatts and a maximum torque of 210 Newton-meters.
1
3
Share

What is the fuel consumption of the 3 Series?

2.0T automatic transmission fuel consumption is 11.1L/100KM. Fuel consumption calculation method: Calculate based on the formula: Fuel consumption per 100km = Volume of fuel (liters) ÷ Distance traveled with that fuel (kilometers) × 100. When refueling, fill up to the fuel filler neck and start counting the kilometers. Next time you refuel, fill up to the fuel filler neck again (for accuracy), then divide the amount spent on fuel by the fuel price to get the liters consumed. Factors affecting fuel consumption: Various driving conditions such as acceleration, deceleration, braking, and engine idling, as well as load capacity, ambient temperature, and whether the air conditioning is on, all affect a car's fuel consumption.
19
5
Share

What does the wrench light mean?

The small wrench on the car dashboard is a maintenance indicator light, not a sign of vehicle malfunction. The wrench is simply a maintenance reminder. The function of the maintenance indicator is to remind the driver to service the vehicle after it has traveled a certain mileage, meaning when the wrench light comes on, you should take the car to a 4S shop for maintenance. Below is an introduction to car maintenance: 1. Car maintenance refers to the regular preventive work of inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. 2. Car maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. 3. The purpose of car maintenance is to keep the vehicle clean, ensure normal technical conditions, eliminate hidden dangers to prevent failures, and slow down the deterioration process to extend the service life.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.