Can I Renew My Driver's License in a Different Location via 12123?

1 Answers
SanAngela
07/25/25 3:10pm
You can renew your driver's license in a different location via 12123, but you must apply for renewal within 90 days before the license expires. If it has already expired, you must go to the original issuing location to renew it. If you wish to renew your license in a different location, you need to undergo a medical examination at a designated hospital. Once you pass, the hospital will upload your medical information to the traffic management department, after which you can apply for license renewal via 12123. The renewal process is as follows: Open the 12123 app, register, and log in; under the driver's license services section, select "Renew Expired Driver's License," and carefully read the service instructions and notices; confirm your personal information, then choose the delivery method. If you opt for mail delivery, you will need to provide a mailing address; after submission, simply wait for the license to be delivered to your door, with a small processing fee and mailing fee required. Additionally, you can also renew your license at a local vehicle management office in a different location. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," when a driver's license expires, the holder can go to the original issuing office or any other vehicle management office outside the original location to complete the renewal process. However, renewing in a different location will automatically transfer the license to the local jurisdiction, meaning the renewal city will become the new issuing location of the license. The renewal process in a different location is the same as renewing locally. The specific steps are as follows: Bring your original ID card and a copy; the original and duplicate of your driver's license; a recent 1-inch white-background color photo without a hat; and a "Driver's Physical Condition Certificate" issued by a qualified medical institution (such as a secondary hospital, township health center, or community hospital) to the vehicle management office to apply for renewal. Obtain and fill out the "Motor Vehicle Driver's License Application Form"; Submit the form and required materials to the staff for review; Once approved, pay the processing fee at the designated window; Wait on-site for about 10 minutes to receive your new driver's license.
Was this review help?
12
5
Share
More Forum Discussions

Can You Continue Driving When the Car's EPC Light Is On?

You can continue driving, but it's advisable to inspect the brake system as soon as possible. This issue is commonly seen in German cars, often due to thin brake pads or insufficient brake fluid. Generally, there are two possible reasons for the EPC light to illuminate. One is a dirty throttle body, which should be cleaned. The other is non-functional brake lights, requiring inspection of the brake switch and wiring. Below is more information about the car's EPC light: 1. The full English name of the EPC light is Electronic-Power-Control, meaning Engine Power Control (electronic throttle). In vehicle maintenance, faults indicated by the EPC light are quite common. If this light comes on, it suggests there might be a fault within the electronic throttle system, potentially affecting the vehicle's normal operation. 2. Solutions for the EPC light being on: 1. Troubleshoot the intake system, use fuel that meets standards, and clean the throttle body; 2. Remove carbon deposits from relevant parts; 3. Rewrite the ECU related data.
1
3
Share

Should the cracked front wheel liner be replaced?

If the damage is minor, it is recommended to repair it. In severe cases, replacement is advised. The fender is the outer body panel that covers the wheel, designed to comply with fluid dynamics, reducing the drag coefficient to ensure smoother driving. More detailed explanations are as follows: 1. The front fender is installed near the front wheel and must ensure the maximum clearance for wheel rotation and movement. Therefore, designers use 'wheel travel diagrams' based on the selected tire model and size to verify whether the fender's design dimensions are appropriate. The rear fender does not face issues with wheel rotation interference, but for aerodynamic considerations, it is slightly arched and protrudes outward. Nowadays, some car fenders are integrated with the car body, manufactured in one seamless process. 2. Additionally, the front fender helps prevent gravel and mud splashed by the wheels from reaching the undercarriage during driving, reducing damage and corrosion to the chassis. Therefore, the materials used must be resistant to weather aging and have good formability. Currently, many car front fenders are made of elastic plastic materials, providing a certain level of cushioning for enhanced safety.
15
5
Share

What's the matter with the navigation screen being black but still having sound?

Navigation screen being black but still having sound may be due to a loose power plug of the navigation display; it could also be caused by a damaged touch screen. If the touch screen is functioning normally, then check for issues with the display screen. Inspect the touch circuit to confirm if there are any problems with the wiring. If no issues are found, consider whether the decoding chip or core module is not working or is damaged. Here is more information about car navigation: 1. Car navigation systems have GPS global satellite positioning functionality. Drivers only need to input the destination into the car navigation system. The system will automatically calculate the most suitable route based on electronic maps and remind the driver to follow the calculated route during the vehicle's movement (for example, before turning). The car GPS navigation system consists of two parts: one part is composed of the GPS receiver and display device installed in the car; the other part is the computer control center, with the two parts connected via positioning satellites. 2. Most car navigation systems use a visual display system as the human-machine interface. Some provide voice systems, allowing people to directly converse with the navigation system and receive voice reminders on when to turn or exit the highway. Some can also provide the car owner with a map of the traveled route for the return trip. Some car navigation systems can display in different languages and can inform the driver of local speed limits, road conditions, and the car's average speed, estimating the time of arrival at the destination for the driver.
1
0
Share

What is the difference between aluminum alloy and cast iron cylinder blocks?

The differences between aluminum alloy and cast iron cylinder blocks are: 1. Gravity: Cast iron: Good high-temperature resistance and less prone to deformation. Cast iron engines are easier to repair and have lower costs when worn out; Aluminum alloy: Lightweight and fast heat dissipation. Lightweight aluminum alloy engines can effectively reduce the engine's own weight, achieving relatively better fuel efficiency. 2. Material: The materials used for engines are mainly divided into two types nowadays. One is aluminum alloy, and the other is cast iron. 3. Heat dissipation: Aluminum alloy has excellent heat dissipation performance, which is incomparable to cast iron.
10
3
Share

What are the electric sedans of Chery?

Chery electric sedans include: Chery eQ1 Ant, Tiggo 3xe, Arrizo 5e, Chery eQ. Taking the Tiggo 3xe as an example: This vehicle is Chery's first pure electric SUV, based on the Tiggo 3x. In terms of body dimensions, its length, width, and height are 4200mm, 1760mm, and 1570mm respectively, with a wheelbase of 2555mm, positioning it as a compact SUV. The Tiggo 3xe comes in two range versions. The Chery Tiggo 3xe400 model uses a ternary lithium battery pack with a capacity of 49kWh, achieving an energy density of 125.6Wh per kilogram, with a comprehensive range of up to 351km. The Chery Tiggo 3xe480 model uses a ternary lithium battery pack with a capacity of 54.3kWh, achieving an energy density of 150.8Wh per kilogram, with a comprehensive range of up to 401km.
16
3
Share

Should the front windshield be tinted?

Front windshields need to be tinted. Because the front windshield is the most exposed to sunlight and requires explosion-proof protection. However, the tint should not be too dark, as it may affect the driver's visibility and make it difficult to see the road ahead. Here is more information about window films: 1. The front windshield is the main area that best reflects the performance of automotive explosion-proof and heat-insulating films, including explosion-proof, UV resistance, heat insulation, and anti-glare properties. 2. High-quality, highly transparent films should be selected. According to the 'Technical Specifications for Safety of Power-Driven Vehicles Operating on Roads' GB7258—2012, implemented on September 1, 2012, 'The visible light transmittance of the windshield and other glass areas in the driver's line of sight must be greater than or equal to 70%, and no mirrored reflective sunshade films are allowed on any window glass.' Therefore, front windshield films with a transmittance of over 70% and a visible light reflectance below 10% can be applied without significantly affecting driving visibility. 3. In terms of clarity, regardless of the film's darkness, high-quality films allow visibility of objects approximately 6 meters away at night, while inferior films create a blurry effect.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.