Can I renew my driver's license if it has expired for 20 days?

1 Answers
HeidiDella
07/29/25 8:43pm
You can renew your driver's license if it has expired for 20 days. According to the regulations, if the license has been expired for less than one year, it can be renewed normally. The renewal and inspection must meet the following conditions: Holders of large passenger vehicle, tractor, city bus, medium-sized passenger vehicle, or large truck driver's licenses must have no demerit points in the current scoring cycle, or holders of other types of driver's licenses must have fewer than 12 demerit points in the current scoring cycle; Holders of large passenger vehicle, tractor, city bus, medium-sized passenger vehicle, or large truck driver's licenses who have demerit points in one scoring cycle, as well as holders of other types of driver's licenses who have been involved in a traffic accident resulting in death and assumed equal or greater responsibility without having their driver's license revoked, must have completed the inspection education; The applicant must have no pending road traffic safety violations or traffic accidents; The applicant's physical condition must meet the driving license requirements; The driver's license must not be under circumstances such as being seized, detained, temporarily suspended, revoked, canceled, or annulled by law.
Was this review help?
5
2
Share
More Forum Discussions

What are the installation steps for the timing belt of the Volvo S80L?

The installation steps for the timing belt of the Volvo S80L are as follows: 1.; 2.; 3.; 4. Fit the timing belt assembly onto each transmission pulley in sequence as required, ensuring the marks on the belt align with those on the pulleys, the timing arrow on the belt matches the engine's rotation direction, the outer edge of the belt is flush with the outer edge of the camshaft, and the belt's end face remains in the same plane. 5. Install the tensioner assembly onto the pulley housing, securing it with a hexagonal flange positioning bolt to ensure the tensioner assembly moves freely. After installation, make sure there are no extra or misaligned teeth between the camshaft timing pulley and the fuel injection pump timing pulley, or between the crankshaft pulley and the camshaft pulley. Avoid bending the timing belt assembly during the installation process.
20
3
Share

Is the Cruze a four-cylinder engine?

The Cruze is not a four-cylinder engine, but a three-cylinder engine. The entry-level model of the Cruze is equipped with a 1.0T engine with a maximum power of 125 horsepower. The high-end model of the Cruze is equipped with a three-cylinder 1.3T engine, which has a maximum power of 163 horsepower. Depending on the model, it is paired with a manual, 6AT, or 7-speed dual-clutch transmission. The Cruze's 1.0-liter turbocharged three-cylinder engine has a maximum power of 92kw and a maximum torque of 170 Nm. This engine can deliver maximum power at 5,600 rpm and maximum torque between 2,000 and 4,000 rpm. It is also equipped with multi-point fuel injection technology and uses an aluminum alloy cylinder head and block.
15
5
Share

What is the difference between semi-automatic block and automatic block?

The difference between automatic block and semi-automatic block is that the automatic block does not require manual operation, while the semi-automatic block requires manual block handling procedures. Here are some introductions about automatic block and semi-automatic block: 1. Semi-automatic block: This type of block requires manual block handling procedures. Trains depart based on the display of the departure signal, but after the train departs, the departure signal can automatically close, hence it is called semi-automatic block. 2. Automatic block: Based on the train operation and block section conditions, the signal can automatically change its display. Trains run according to the signal display, and this block method is entirely automatic, hence it is called automatic block. The automatic block is a device that automatically completes the block task for running trains.
17
0
Share

What is the working principle of a mechanical transmission?

The working principle of a mechanical transmission includes the principles of manual transmission, automatic transmission, and AT transmission. Below are the relevant introductions: 1. Principle of manual transmission: By shifting the gear lever, the driving gear on the intermediate shaft is switched, and the combination of gears of different sizes with the power output shaft changes the torque and speed of the driving wheels. The engine's power input shaft is indirectly connected to the power output shaft through an intermediate shaft. 2. Principle of automatic transmission: An automatic transmission uses planetary gear mechanisms to change gears. It can automatically shift gears based on the degree of the accelerator pedal and changes in vehicle speed, while the driver only needs to control the speed by operating the accelerator pedal. 3. Working principle of AT transmission: The torque converter is the most distinctive component of an AT transmission. It directly inputs the engine's power and transmits torque while also serving as a clutch. The pump wheel drives the turbine to rotate through fluid, and by adding a guide wheel between the pump wheel and the turbine, the speed difference between the pump wheel and the turbine can be achieved through reaction force, enabling gear shifting and torque conversion.
12
4
Share

What is the speed requirement for straight-line driving in Subject 3?

The speed for straight-line driving in Subject 3 should not be lower than 40 km/h. Here are some details about the Subject 3 test: 1. Key points to note: The speed for straight-line driving must not be lower than 40 km/h, and the steering wheel movement should not exceed 3 degrees. The straight-line driving must be completed within the specified distance. If there are many vehicles ahead, you can stop briefly, wait for the vehicles ahead to move a bit, and then start again. However, stopping on a pedestrian crossing is strictly prohibited, as it will result in an immediate failure. 2. Brief introduction: Subject 3 includes the road driving skills test and the safety and civilized driving knowledge test. It is part of the motor vehicle driver's license assessment and is the abbreviation for the road driving skills and safety and civilized driving knowledge test in the motor vehicle driver's examination. The content of the road driving skills test varies depending on the type of vehicle being licensed.
16
2
Share

Where is the switch of the dash cam?

There are many brands and models of dash cams, and the switch positions vary slightly among different brands. Some dash cam switches are located on the side of the screen or the side of the device, while others are at the bottom or underside of the screen. The functions of a dash cam are as follows: 1. Record various status information of vehicle operation and driver actions: This includes data such as mileage and speed. Models with a GPS module can also record the vehicle's location and travel route. 2. Alarm function: According to national standards, continuous driving should not exceed 4 hours, and driving time within 24 hours should not exceed 8 hours; otherwise, it will be considered fatigue driving. Additionally, depending on the functions of the driving recorder, it may also include overspeed alerts, anti-theft alerts, and vehicle fault alerts. 3. Assist in determining liability in traffic accidents: By extracting the stored data from the recorder, it can help determine liability in traffic accidents, making the judgment more scientific.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.