Can I renew my driver's license if it expires in 100 days?

2 Answers
MacHaven
08/30/25 6:54am
You cannot renew your driver's license 100 days in advance. The renewal can only be done within 90 days before the expiration of the current license. Documents required for renewal: Identity proof of the motor vehicle driver, the driver's license, a medical certificate issued by a county-level or higher medical institution or a military hospital at the regimental level or above, and a completed application form. Additionally, you must submit the proofs and certificates specified in Article 48. Renewal process: Bring your ID card and driver's license to the license office, fill out the renewal application form, and submit the documents along with the medical examination form and the application form to the staff. Pay the processing fee, and then wait to receive your new license. Before renewal, check if there are any outstanding traffic violations. If there are, they must be settled first; otherwise, the renewal will not be processed. The renewal is usually completed on the spot, but in some larger cities, it may take a few days, though it must be completed within 15 days at most. You will then be notified to collect your new driver's license.
Was this review help?
18
1
Share
OHazel
09/12/25 3:56am
I've been driving for almost ten years, so I'm quite clear about this minor issue. Having 100 days left on your driver's license is completely sufficient for renewal! The reasonable time window is within 90 days before expiration, and this policy is implemented nationwide. The renewal process is very simple—just visit your local vehicle management office. It's best to go two or three months in advance, bringing your original ID card, driver's license, and two one-inch white background photos, plus you'll need to undergo a physical exam. The medical check-up is done at hospitals designated by the vehicle management office, testing vision, hearing, etc., and it's quite quick to complete. You can also make online appointments to reduce queuing time, depending on local policies. Don't wait until the last few days, as you might encounter peak periods or incomplete documentation causing delays. Driving with an expired license isn't an issue if you're not on the road, but if caught driving, you could face fines or even penalty points. I recommend acting early to avoid trouble, and it's also a good opportunity to check your vision status. Always pay attention to your documents while driving, and developing a habit of regular updates is the most hassle-free approach.
Was this review help?
15
4
Share
Expand All
More Forum Discussions

How many meters long is an Audi car?

Audi cars range in length from 4.5 to 5 meters. Taking the Audi A4L as an example, it is a medium-sized 4-door 5-seater sedan with body dimensions of: length 4858mm, width 1847mm, height 1439mm, wheelbase 2908mm, and a fuel tank capacity of 56 liters. The Audi A4L is equipped with a 2.0T turbocharged engine and a 7-speed dual-clutch transmission, with a maximum power of 110 kilowatts and a maximum power speed of 4200 to 6000 revolutions per minute. Its drive system is front-wheel drive, and both the front and rear suspensions use five-link independent suspensions. The front and rear tire specifications are 225/50R17.
4
2
Share

What does the automotive autonomous driving assistance system mean?

The following are the functions of autonomous driving assistance technology: 1. Autonomous Driving Assistance System (ADAS) uses various sensors installed on the vehicle to sense the surrounding environment during driving, collect data, and identify, detect, and track static and dynamic objects. 2. Combined with navigation map data, it performs system calculations and analysis to alert the driver in advance of potential hazards. Here is a detailed introduction to driving assistance technology: 1. Driving assistance technology falls under the L1 and L2 levels of autonomous driving technology. 2. In the L1 stage, the vehicle begins to intervene in either braking or steering control, sharing the driver's workload, mainly including adaptive cruise control, lane keeping, emergency braking, and other functions. 3. In the L2 stage, the vehicle starts to take over multiple longitudinal and lateral controls, with driving operations performed by the system, but the driver must still remain attentive to take over the vehicle at any time.
20
1
Share

What Are the Reasons for the Brake Light Staying On?

The reasons for the brake light staying on are: 1. Lack of brake fluid; 2. Short circuit in the tail light bulb wiring; 3. Wear and aging of the brake pads; 4. Damage to the brake switch; 5. Problem with the ABS sensor. The solutions for the brake light staying on are: 1. Replace the brake light bulb; 2. Replace the brake light fuse; 3. Replace the brake light switch; 4. Check for short circuits in the wiring. The working principle of the brake light is: when the driver steps on the brake pedal, it presses down on the brake light switch contact point, connecting the brake light circuit and turning the brake light on. When the brake pedal is released, the switch contact is disconnected, and the brake light turns off. The car brake light is installed at the rear of the vehicle, allowing following vehicles to distinguish the driving status.
9
1
Share

How to Diagnose Abnormal Engine Noises?

There are two methods for diagnosing abnormal engine noises, namely the manual experience auscultation method and the instrument-assisted diagnosis method. The following is a detailed introduction to diagnosing abnormal engine noises: 1. Manual experience auscultation method: Technicians reproduce the abnormal noise by changing engine operating conditions and other measures, identify the characteristics and patterns of the noise, and understand the engine's operating status and fault symptoms when the noise occurs, thereby determining the location of the noise. This is currently the most common and primary method used. During the process of diagnosing engine abnormal noises, a screwdriver is often used to listen to the noise. 2. Instrument-assisted diagnosis method: Due to the lower accuracy of the manual experience auscultation method, some instruments and equipment are commonly used to assist in auscultation and analysis. Commonly used instruments mainly include stethoscopes, noise meters, vibration analyzers, etc.
5
0
Share

What are the solutions for abnormal tire wear?

Solutions for abnormal tire wear: 1. For severe wear in the center of the tread, it is mostly caused by excessive tire pressure. Adjust the tire pressure to the normal range. 2. For wear on one side of the tread, this phenomenon is usually caused by deviation in wheel camber. Timely tire rotation is recommended. 3. For wave-like or scalloped wear on the tread, check if the wheel hub is loose. If loose, it should be adjusted. Additionally, rotate the tire to observe if it wobbles. If wobbling occurs, it indicates wheel rim deformation, which should be replaced promptly. 4. For sawtooth-shaped wear on the tread, this phenomenon is often related to improper front wheel toe-in. It can be resolved by adjusting the length of the tie rod.
13
1
Share

What brand of car is Buick?

Buick is a brand of automobile, and its models include: Buick GL8, Buick GL6, Excelle, Yinglang, Enclave, etc. Taking the 2021 Buick GL6 as an example, it belongs to the MPV category, with body dimensions of: length 4692mm, width 1794mm, height 1626mm, wheelbase of 2796mm, front and rear track of 1540mm, fuel tank capacity of 45L, luggage compartment capacity of 1521L, and curb weight of 1490kg. The 2021 Buick GL6 is equipped with a 1.3T turbocharged engine, with a maximum horsepower of 163PS, maximum power of 120kW, maximum torque of 230Nm, and is paired with a 6-speed automatic transmission.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.