Can I reject the randomly selected license plate number at the DMV?

2 Answers
Isabelle
09/02/25 8:17am
You can reject the randomly selected license plate number at the DMV. Below is relevant information about license plate selection at the DMV: 1. Explanation: As long as you don't complete the vehicle registration procedure, the license plate number will be automatically abandoned. However, you'll need to wait about three days before selecting another number. 2. Notes: When randomly selecting from the license plate number database, these are ready-made numbers. Many plates come from recently scrapped or deregistered vehicles, so these numbers are often quite good. Staff will ask whether you want to choose from randomly selected options (usually 10 choices) or create your own combination. If you choose random selection, license plate numbers will flash quickly on the computer screen. When you press the confirmation button, the system will stop scrolling and display 10 numbers, from which you must select one within 2 minutes.
Was this review help?
19
5
Share
DanielaLee
09/15/25 3:25am
I remember last time when I accompanied a friend to choose a license plate number, the lady at the vehicle management office directly said it couldn't be changed once confirmed on the spot. The rule is that the system locks the selection immediately after pressing the confirmation button, and there's no going back at that point. If you haven't pressed confirm yet, you can still decline, but the opportunity might be forfeited. Procedures vary slightly by location—some cities offer three random selections to pick a satisfactory one. The safest approach is to ask the staff about local rules before choosing. I've seen people regret their choices bitterly. If you really don't want the selected number, a compromise is to forfeit this chance and wait three years for the system to automatically release the plate association, allowing a reapplication, but during this period, the car can only operate with temporary plates.
Was this review help?
7
3
Share
Expand All
More Forum Discussions

What is the solution for the buzzing noise at 2000 RPM in the X-Trail?

If there is abnormal noise during instant startup, it may be caused by the starter motor's gear not retracting quickly enough, resulting in flywheel gear grinding noise. The starter motor needs to be inspected. If there is abnormal noise during engine idle after startup, the fault point is likely due to excessive clearance between the hydraulic tappets and valves inside the engine cylinder head.
14
3
Share

How to Remove Adhesive from Paint Surface?

First, the car owner needs to prepare a bottle of tar and resin remover, which can be purchased at a regular hardware store. Because the resin remover can easily wipe off the tar on the car body without damaging the paint. Next, simply spray the resin remover onto the tar stains on the car body surface. Use a clean cloth to wipe the car body surface, and the tar stains will be easily removed, leaving the car body clean and free of tar.
8
2
Share

What to Do About Raised Particles on the Paint Surface?

First, perform a simple polish on the car body surface. Squeeze an appropriate amount of wax liquid onto the car body. Then use a polishing machine with the wax liquid to polish the surface. Next, wipe the car body with a towel to make the polished area smoother and shinier.
8
4
Share

What to Do When a Car Air Conditioning Condenser Leaks?

If there is an issue with the pipes, consider removing and replacing these hoses. If the problem is due to the compressor, where the sealing at the end of the compressor's stroke is insufficient, the compressor or its components need to be replaced. If the issue is with the expansion valve, where functional components are malfunctioning, refrigerant state changes can easily cause problems here. Timely replacement is necessary.
16
2
Share

How to Operate a 7-Speed Wet Dual Clutch Transmission?

Depress the brake pedal and press the one-touch start button. The dashboard will illuminate, indicating that the vehicle's power system is activated. Press the mirror folding button located on the control panel to the left of the steering wheel. Once the vehicle detects the locking signal, the side mirrors will automatically retract.
7
0
Share

How to Clean a Car's Air Conditioning Radiator?

The outermost layer covered is the condenser, not the radiator. Simply rinsing from the outside with a water gun won't achieve an effective cleaning. Remove the radiator for cleaning. Separate the radiator and condenser, then use a brush or high-pressure water gun to remove dirt from the gaps, followed by rinsing the surface with clean water. It's best not to attempt cleaning the radiator yourself. Removing the radiator is quite troublesome, and even repair shops are reluctant to disassemble the entire radiator for cleaning, so supervision is necessary.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.