Can I prepare the driver's license photo receipt by myself?

Is It Legal to Convert from Manual to Automatic Transmission?

Converting from manual to automatic transmission is not legal. Here is some related information about automatic transmissions: 1. Advantages of automatic transmissions: Automatic transmission cars are easier to operate than manual transmission cars, as they can automatically match gears with speed. They offer higher driving comfort, eliminating the need for manual gear shifting and close coordination between hands and feet. Automatic transmission cars also have higher safety ratings. They have more stringent performance requirements, and their power and safety devices are of better quality. 2. Disadvantages of automatic transmissions: Automatic transmission cars consume relatively more fuel, are more expensive to purchase, and have higher maintenance costs.

19

0

Share

What is the difference between OBD1 and OBD2?

Here is the relevant introduction to the differences between OBD1 and OBD2: 1. Function: OBD stands for "On-Board Diagnostics." This system continuously monitors the engine's operating conditions to check if the vehicle's emissions exceed the standard. If they do, it will immediately issue a warning. When a fault occurs in the system, the malfunction indicator lamp or check engine warning light will illuminate, and the powertrain control module will store the fault information in memory. Through a specific procedure, the fault code can be read from the PCM. Based on the fault code, maintenance personnel can quickly and accurately determine the nature and location of the fault. 2. Difference: The difference between OBD-II and OBD1's on-board diagnostic system lies in its strict focus on emissions. Its essential function is to monitor vehicle emissions. When the emissions of carbon monoxide, hydrocarbons, nitrogen oxides, or fuel evaporation pollutants exceed the set standard, the malfunction indicator lamp will light up to alert the driver.

14

3

Share

Does idling with the AC on consume fuel?

Idling with the AC on does consume fuel. Here is relevant information about fuel consumption: 1. Reasons for high fuel consumption: Poor fuel line condition: Excessive carbon buildup causing fuel line blockage leads to increased fuel consumption. Brake abnormalities: Brake pads not retracting properly, keeping the vehicle in a constant braking state while driving. Spark plug issues: Generally, spark plugs need replacement after 20,000-30,000 kilometers of driving. 2. Methods to reduce fuel consumption: Correct bad driving habits, avoid using low-quality gasoline, clean engine carbon deposits, avoid sudden acceleration, clean the throttle valve, and reduce vehicle load. Removing unnecessary items from the trunk can reduce vehicle weight and improve fuel efficiency.

11

0

Share

What to do if ETC was not scanned when exiting the highway after being scanned when entering?

If you used ETC when entering the highway but it wasn't scanned when exiting, the unpaid fee can be deducted together during your next toll station exit. If the toll station cannot resolve this issue, you need to bring your ID card, vehicle license, and OBU device to the local ETC service center for troubleshooting. How ETC works: Through dedicated short-range communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at the toll station, the system uses computer networking technology to perform backend settlement processing with the bank. This allows vehicles to pass through highway or bridge toll stations without stopping while still paying the required fees. Where ETC can be installed: For small vehicles like cars and minivans, the OBU device is installed on the upper middle part of the front windshield. For large vehicles like trucks and buses, it's installed on the lower middle part. ETC installation requirements: The height should be no less than 1.2 meters and no more than 2.5 meters; The installation angle N should be between 30º and 90º (the angle between the electronic tag surface and the horizontal plane).

5

0

Share

How to Clean Adhesive Residue on a Car?

Adhesive residue on a car can be cleaned and removed using the following methods: 1. Soapy water solution: Ordinary soapy water is simple, convenient, and easy to use for cleaning tree sap. 2. Essential balm removal: Apply essential balm to the adhesive and scrub with a cotton swab. 3. Alcohol removal: Brush alcohol onto the adhesive on the glass; once dissolved, the residue on the car body can be peeled off. 4. Dishwashing liquid cleaning: Apply undiluted dishwashing liquid to the car body, let it soak for a while, then rinse with water for effective cleaning. 5. Car clay bar wiping: Use a car clay bar to wipe, as it has strong cleaning power and can thoroughly remove adhesive residue while also providing some polishing effect.

3

4

Share

What is the Difference Between Horsepower and Power in Cars?

Horsepower is actually another way to express power, and horsepower and power can be converted into each other, but horsepower emerged earlier than power. The following is a related introduction about power: 1. Power and Fuel Consumption: There is no difference in engine hardware, but different performances are achieved by adjusting ECU data, combined with differences in vehicle configuration, to achieve different positioning of the entire vehicle. Turbocharged engines can control the turbocharger through the ECU to achieve different boost pressures, and it is relatively simple to reduce power by lowering the boost pressure. Generally, such engines are designed for high power, and reducing power will not cause reliability issues. However, for low-power engines that are not optimized, fuel consumption is basically the same as that of high-power engines. 2. Differences Between High and Low Power: Different versions of high and low power also have different valve structures. The low-power version, for better fuel economy, is equipped with a dual-cycle system. Simply put, by adjusting the entire valve structure, some power is sacrificed at low RPMs to achieve better fuel economy, which the high-power version does not have. This may also affect many supporting systems, such as cooling system pipelines, cooling fans, engine motors, and turbos.

20

1

Share

Can I prepare the driver's license photo receipt by myself?

Is It Legal to Convert from Manual to Automatic Transmission?

What is the difference between OBD1 and OBD2?

Does idling with the AC on consume fuel?

What to do if ETC was not scanned when exiting the highway after being scanned when entering?

How to Clean Adhesive Residue on a Car?

What is the Difference Between Horsepower and Power in Cars?

Why is there no sound when connecting to car Bluetooth?

What to Do When the Manual Transmission Key Won't Come Out?

Will driving not according to the guide lane be penalized?

Which Times Are Free on Highways?