Can I pick up the car directly if it's in stock?

1 Answers
StKinsley
07/29/25 12:27pm
If the car is in stock, you can pick it up directly! New vehicle registration process: After purchasing a motor vehicle, you need to first pay for compulsory traffic insurance, which can be handled directly at the 4S store or at an insurance company. At the same time, the 4S store should provide temporary license plates. With the compulsory insurance policy, car purchase invoice, and motor vehicle factory certificate, go to the tax bureau to pay the vehicle purchase tax. Then, with the purchase tax invoice, car purchase invoice, factory certificate, compulsory insurance policy, and ID card, drive the vehicle to the vehicle management office, fill out the vehicle registration application form in the hall, and pay the registration fee. Then, go to the designated window to check if the vehicle is exempt from inspection. If it is, the inspection exemption certificate will be printed directly. 4S store pickup conditions: After purchasing the car, you must immediately insure it with compulsory traffic insurance, which can be handled at the 4S store or at an insurance company. Nowadays, telephone insurance is commonly used. It's best to affix the insurance sticker on the right windshield. If you haven't received it yet, you can skip it for now, but you can only drive on the road after the compulsory insurance takes effect! Have temporary license plates and display them on the car, one on the front and one on the rear windshield. The driver must have a valid driver's license for the vehicle type. The car must be equipped with a fire extinguisher and a warning triangle. Within the validity period of the temporary license plates, the registration procedures must be completed.
Was this review help?
1
2
Share
More Forum Discussions

Where is the car oxygen sensor installed?

Location of the car oxygen sensor: one is located behind the exhaust manifold, and the other is behind the three-way catalytic converter. The oxygen sensor behind the exhaust manifold is called the front oxygen sensor, while the one behind the three-way catalytic converter is called the rear oxygen sensor. The oxygen sensor can detect the oxygen content in the exhaust and then feed the data back to the ECU, which can adjust the air-fuel ratio based on this data. The faster the voltage frequency of the oxygen sensor changes, the better the sensor is. If the voltage is 0 millivolts or 1 millivolt or even does not change, it indicates that the oxygen sensor is severely aged and needs to be replaced in time. Under normal circumstances, the signal of the front oxygen sensor is higher than that of the rear oxygen sensor.
7
3
Share

Where is the fuse box located in a BMW?

BMW's fuse box is located under the steering wheel in the main driver's compartment. The working principle of a fuse is: when the circuit current exceeds twice the rated current of the fuse, it will blow within seconds to protect the circuit. BMW's models include: BMW X1, BMW 3 Series, BMW X5, BMW X6, BMW X7, etc. Taking the 2021 BMW X1 as an example, its body dimensions are: length 4565mm, width 1821mm, height 1620mm, with a wheelbase of 2780mm. The 2021 BMW X1 features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 140PS, a maximum torque of 220Nm, and a maximum power of 103kW, paired with a 7-speed dual-clutch transmission.
20
5
Share

How to Use Reference Points and Steer the Wheel for C1 License Subject 2 Reverse Parking?

C1 exam reverse parking reference points and steering method: When the lower edge of the left rearview mirror aligns with the starting line, quickly turn the steering wheel fully to the right; When the distance between the vehicle body and the library corner line is greater than or equal to 30cm, keep the steering wheel unchanged and continue reversing; If the distance is less than 30cm, turn the steering wheel one circle to the left until reaching the appropriate distance, then continue reversing; When the vehicle body is parallel to the library sideline, straighten the steering wheel, and stop when the lower edge of the left rearview mirror aligns with the library corner line. Permitted vehicle types for C1 license: The C1 driving license allows driving small and mini passenger vehicles, light and mini cargo vehicles; light, small, and mini special purpose vehicles; small passenger vehicles with seating capacity ≤9. C1 license prohibits driving: large buses, tractor trucks, city buses, medium buses, large trucks, ordinary tricycles, ordinary motorcycles, mopeds, wheeled self-propelled machinery, trolleybuses, and trams. Additionally, C1 license holders cannot drive vehicles with over 9 seats or trucks exceeding 6 meters in total length.
20
2
Share

Which province does the Wu A license plate belong to?

In China, there is no vehicle license plate that starts with the character 'Wu'. Such license plates only appear in TV dramas or movies to match fictional place names. These plates are not allowed on the road and are considered illegal. Even for filming purposes, prior notification to the traffic management department is required. Below is an introduction to vehicle license plates of various provinces in China: Beijing (Jing), Tianjin (Jin), Heilongjiang (Hei), Jilin (Ji), Liaoning (Liao), Hebei (Ji), Henan (Yu), Shandong (Lu), Shanxi (Jin), Shaanxi (Shaan), Inner Mongolia (Meng), Ningxia (Ning), Gansu (Gan), Xinjiang (Xin), Qinghai (Qing), Tibet (Zang). Hubei (E), Anhui (Wan), Jiangsu (Su), Shanghai (Hu), Zhejiang (Zhe), Fujian (Min), Hunan (Xiang), Jiangxi (Gan), Sichuan (Chuan), Chongqing (Yu), Guizhou (Gui), Yunnan (Yun), Guangdong (Yue), Guangxi (Gui), Hainan (Qiong), Hong Kong (Gang), Macau (Ao), Taiwan (Tai).
17
2
Share

What Happens If a Spare Car Key Is Not Used for a Long Time?

If a spare car key is not used for a long time, its battery will automatically drain. It is advisable to remove the battery when the key is not in use. The steps to replace a car key battery are as follows: 1. Remove the mechanical key; 2. Insert a flat-head screwdriver into the "open" slot at the bottom and gently pry it open; 3. Once a gap appears, use the screwdriver to carefully pry open the key along the gap; 4. Remove the old battery and replace it with a new one; 5. Reassemble the key. The functions of the car key include: 1. Automatically closing the windows after turning off the engine; 2. Helping locate the car in a parking lot; 3. Automatically opening the trunk; 4. Remotely opening the windows. Precautions for using the key are: 1. Avoid placing it near electronic devices; 2. Do not expose the key to direct high temperatures; 3. Avoid using batteries with different power levels.
19
4
Share

How Many Years Does It Take to Upgrade from a C1 to an A2 Driver's License?

It takes at least 4 years to upgrade from a C1 to an A2 driver's license. The reasons for the lengthy duration are as follows: When upgrading from a C1 to a B1 or B2 driver's license, you must have at least one year of driving experience with a C1 license before you can register for the exam. After obtaining a B1 or B2 license, the driver must have at least three years of driving experience before being eligible to take the A2 exam. Additionally, during these three years, the driver must not have any year where the demerit points reach 12; otherwise, the time will be recalculated. Requirements for upgrading to an A2 license: According to the relevant regulations of the Ministry of Public Security, drivers applying to add the tractor-trailer (A2) driving category must have held a B1 or B2 license for at least three years or an A1 license for at least one year, with no record of accumulating 12 demerit points in any scoring cycle. Permitted vehicle types for A2: Tractor-trailers, B1, B2, C1, C2, C3, C4, and M.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.