Can I pass the driving test after practicing for only two days for Subject 3?

1 Answers
Genesis
07/29/25 9:38pm
Two days is too short a time for preparation, as Subject 3 is the most challenging part of the driving license test and requires more time. Below is relevant information: Introduction to Subject 3: Subject 3, which includes the road driving skills test and the safe and civilized driving knowledge test, is a part of the motor vehicle driving license assessment. It is the abbreviated term for the road driving skills and safe and civilized driving knowledge test in the motor vehicle driver examination. The content of the road driving skills test varies depending on the type of vehicle you are licensed to drive. Test content for Subject 3: The driving skills test includes preparation before driving, simulated light test, starting, driving straight, gear shifting operations, changing lanes, parking by the roadside, going straight through intersections, etc. The safe and civilized driving knowledge test covers requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, etc.
Was this review help?
6
5
Share
More Forum Discussions

What Kind of Scratches Affect Vehicle Inspection?

Vehicle annual inspection is not affected by minor scratches on the exterior, but obvious rust or damage will affect the inspection. According to the "Motor Vehicle Safety Technical Inspection Items and Methods," the vehicle's exterior must meet the following requirements: 1. Components must be intact: Bumpers, rearview mirrors, and other components should be in good condition. 2. Windshield must be complete: The windshield should be intact, with no cracks or damage in the driver's line of sight, and no mirror-reflective sunshade film should be applied to any windshield. 3. The vehicle body should be symmetrical: The vehicle body should be symmetrical, and the height difference between left and right symmetrical parts of the body should comply with GB-7258 regulations. 4. No external protrusions: The vehicle body should not have obvious mirror-reflective surfaces, any parts or components that could come into contact with pedestrians, cyclists, or other traffic participants, or any sharp edges or protrusions that could cause injury. 5. No damage: The vehicle body (including the cabin) and its paint should not show obvious rust or damage. 6. No safety hazards from markings: Sprayed or pasted markings or advertisements on the vehicle body should not affect safe driving.
18
4
Share

How Often Should Roller Weights Be Replaced?

There is no specific replacement interval for roller weights; it depends on the actual usage conditions. Here are the relevant details: 1. Description of Roller Weights: Roller weights are one of the rotating components in a scooter's transmission, categorized into light roller weights and heavy roller weights. 2. Light Roller Weights: Lighter roller weights provide stronger acceleration, reducing the time needed to reach a certain speed. However, the engine operates at higher RPMs during movement. This setup is more fuel-efficient for frequent city driving. 3. Heavy Roller Weights: Heavier roller weights result in weaker acceleration performance, requiring more time to reach high speeds. However, when the weights slide to the outer edge of the variator pulley, their greater inertia allows the engine to operate at lower RPMs, improving fuel efficiency during prolonged highway driving. 4. Choosing Between Light and Heavy Roller Weights: Heavier roller weights generate greater centrifugal force, shortening acceleration time but potentially causing excessive instantaneous torque on the crankshaft, which may lead to crankshaft breakage in severe cases. Lighter roller weights produce less centrifugal force, resulting in slower acceleration from a standstill. 5. Replacing Roller Weights: Roller weights can be replaced, but it must be done based on actual needs. Over-pursuing rapid acceleration may lead to serious consequences.
17
3
Share

Does the Audi S3 Belong to the Hot Hatch Category?

Audi S3 belongs to the hot hatch category, with its powerful performance and equipped with a four-wheel drive system. The Audi S3 is powered by the third-generation EA888 engine, a 2.0-liter turbocharged engine with a maximum power of 213 kilowatts and a maximum torque of 380 Newton-meters. The engine reaches its peak power at 5,400 to 6,500 rpm and its peak torque at 1,850 to 5,300 rpm. This engine features hybrid injection technology and utilizes an aluminum cylinder head with a cast iron cylinder block. It is paired with a 7-speed dual-clutch transmission.
18
1
Share

Does the Audi S5 have a coupe version?

Audi S5 does have a coupe version. The Audi S5 is a high-performance sports coupe under the Audi brand. The Audi S5 is available in coupe, four-door, and convertible versions. The coupe version of the Audi S5 has a wheelbase of 2770 mm, with length, width, and height dimensions of 4702 mm, 1846 mm, and 1368 mm respectively. The entire Audi S5 lineup is equipped with a 3.0-liter turbocharged V6 engine, which delivers 354 horsepower and a maximum torque of 500 Nm. The engine's maximum power output is achieved between 5400 and 6400 rpm, while the peak torque is available from 1370 to 4500 rpm.
13
1
Share

Is the TTS four-wheel drive?

The TTS is four-wheel drive, and this car's performance and handling are stronger than the regular T. The Audi TTS is equipped with a 2.0-liter turbocharged engine across the entire lineup. This engine delivers 286 horsepower and a maximum torque of 380 Nm, with the maximum power output occurring between 5,300 and 6,200 rpm, and the maximum torque available from 1,800 to 5,200 rpm. The engine is paired with a 6-speed dual-clutch transmission, which is known for its high transmission efficiency and fast gear shifting, making it very suitable for performance cars. The Audi TTS features a MacPherson independent suspension at the front and a four-link independent suspension at the rear.
1
5
Share

How much horsepower does the Porsche 911 Turbo RS have?

There is no Turbo RS model in the Porsche 911 lineup. The Porsche 911 only has Turbo S models, which produce 581 horsepower. The Porsche 911 Turbo S is equipped with a 3.8-liter horizontally opposed six-cylinder twin-turbocharged engine. This engine delivers a maximum power output of 427 kW and a peak torque of 700 Nm. The maximum power is achieved at 6,750 rpm, while the peak torque is available between 2,100 rpm and 4,250 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. The turbocharged engine can deliver its maximum torque at relatively low engine speeds.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.