Can I pass the annual inspection after changing from 14-inch to 15-inch rims?

What Are the Reasons for Reduced Engine Power?

Common reasons include: excessive carbon deposits in the engine, leading to insufficient air intake; fuel supply system blockages, etc. Below are detailed explanations of the specific reasons: 1. Excessive carbon deposits in the engine: Too much carbon buildup on the valves and intake pipes is the most common cause of reduced engine power. The solution is to seek professional automotive technicians to clean the carbon deposits and check if the spark plugs need replacement. 2. Fuel supply system blockages: Inspect the fuel supply system for any blockages or vapor lock in the fuel lines, ensure the fuel pump is functioning properly, check if the carburetor float chamber fuel level meets the specified requirements, verify if the air filter is clogged, and check for any obstructions in the exhaust system. 3. Poor tire pressure: Improper tire pressure is also one of the factors affecting reduced engine power, especially when the tire pressure is low and the vehicle is carrying a large number of passengers. Therefore, when inflating the tires, ensure they are adequately filled according to the tire pressure chart indicated on the vehicle.

15

5

Share

Is it okay to add too much diesel engine oil?

No, it's not okay. The engine has specific requirements for the amount of oil; it cannot be too much or too little. Here are the effects of adding too much oil: 1. Reduced power output and increased fuel consumption: If the crankshaft is mostly or entirely submerged in oil, the resistance it faces increases, which manifests as the engine running sluggishly and with greater resistance. 2. Accelerated carbon buildup: Prolonged burning of excess oil can lead to carbon deposits in the engine. Increased carbon deposits in the combustion chamber result in reduced power and higher fuel consumption. 3. Potential damage to the catalytic converter: More oil entering the combustion chamber worsens exhaust emissions, affecting the lifespan of the catalytic converter. In severe cases, it may even cause the catalytic converter to fail. 4. Faster aging of car components: Excessive oil places extra burden and pressure on various parts. The greater the pressure, the faster the components age. A noticeable example is the crankshaft oil seal, which can age rapidly under high pressure, increasing the risk of oil leaks.

9

0

Share

Is It Necessary to Apply Glaze on a New Car?

For new car models with thicker paint, applying glaze is temporarily unnecessary; it can be done after the original car wax wears off or the new car period passes. For models with thinner and softer paint, applying glaze is advisable as it provides better protection for the paint. Benefits of applying glaze: The non-stick property of glaze makes the paint surface less prone to dirt, keeping it clean. After applying glaze, the glaze layer increases the hardness and brightness of the paint surface, effectively protecting it from minor scratches and, to some extent, resisting temperature effects on the paint. Applying glaze to an old car can restore the shine to oxidized and faded paint. Glaze offers UV resistance, acid rain protection, oxidation resistance, anti-static properties, corrosion resistance, and wash durability, effectively reducing the roughness of the paint surface, minimizing friction with the external environment, and better protecting the paint. Drawbacks of applying glaze: Since glaze is derived from petroleum, it oxidizes easily in the air. Once oxidized, it not only loses its protective effect but also causes the paint to oxidize along with it, harming the paint to some extent. Additionally, the high-speed vibration polishing machine used during the glazing process, if used frequently, can damage the paint surface, making it more fragile.

17

1

Share

How to Deal with P0087 Rail Pressure Too Low?

Check the gasoline filter of the Magotan to see if it is blocked by foreign objects. 1. Possible Causes: If the rail pressure is shown to be low, first inspect the high-pressure fuel pump before checking the low-pressure fuel pump in the fuel tank. It could also be due to plunger wear, common rail pressure regulator failure, or ECU malfunction. 2. High-Pressure Fuel Rail: The high-pressure fuel rail in the Magotan is used to store fuel and suppress pressure fluctuations caused by the high-pressure pump's fuel supply and the injector's fuel injection, ensuring stable pressure in the driving system. The high-pressure injection pump needs to deliver fuel to the rail, which then sends it to the injectors. 3. Analyzing the Fault Point: When the Magotan experiences low rail pressure, for a direct-injection engine, it could be due to a damaged fuel pump or high-pressure pump pressure sensor. It is recommended that the owner visit a repair shop to read the engine control system fault codes with a computer for a precise diagnosis of the fault point based on the codes.

18

4

Share

How Many Spark Plugs Does a Car Need?

Typically, a car has as many spark plugs as it has cylinders, following the principle of one spark plug per cylinder. Spark plugs are crucial components in the ignition system of a gasoline engine. They introduce high-voltage electricity into the combustion chamber and create a spark by jumping the electrode gap, thereby igniting the combustible air-fuel mixture in the cylinder. Spark plugs are installed on the side or top of the engine. In earlier designs, spark plugs were connected to the distributor via ignition cables. Over the past decade, most car engines have transitioned to a system where the ignition coil is directly connected to the spark plug. How Spark Plugs Work: The ground electrode of a spark plug is connected to the metal shell, which is threaded into the engine block via the cylinder head. The insulator primarily serves to isolate the metal shell from the central electrode. The terminal nut is the part of the spark plug that contacts the high-voltage coil. When current passes through the terminal nut and the central electrode, it ionizes the medium between the central electrode and the ground electrode, generating a spark that ignites the air-fuel mixture in the cylinder.

14

2

Share

How Many Types of Interest-Free Installment Plans Are Available for New Cars?

New car interest-free installment plans are categorized as follows: 1. Manufacturer Interest-Free Plans: These typically require a higher down payment, usually 30% or more, with repayment terms of two or three years. This is a highly recommended and cost-effective option, suitable for consumers who are not financially constrained by the down payment. 2. Manufacturer Subsidized Interest Plans: In collaboration with banks, car manufacturers cover a portion of the interest, while the customer pays the remaining part. This option offers a slightly lower down payment compared to manufacturer interest-free plans, with higher loan amounts and longer repayment periods. The interest rate is usually around 2.3% to 3%, making it suitable for consumers with tight budgets for down payments and monthly installments. 3. Bank Loans: Obtained through financial loan companies or banks, this is a less recommended option due to higher interest rates, typically around 4% to 5%. While the down payment threshold is lower (as low as 10%), it's important to be cautious. Some 4S stores or car dealerships may privately inflate interest rates to earn rebates, with rates sometimes as high as 10%. Many consumers have already fallen victim to such scams. Therefore, when opting for an installment plan to buy a car, it's crucial to learn how to calculate interest to avoid being deceived or overcharged.

14

5

Share

Can I pass the annual inspection after changing from 14-inch to 15-inch rims?

What Are the Reasons for Reduced Engine Power?

Is it okay to add too much diesel engine oil?

Is It Necessary to Apply Glaze on a New Car?

How to Deal with P0087 Rail Pressure Too Low?

How Many Spark Plugs Does a Car Need?

How Many Types of Interest-Free Installment Plans Are Available for New Cars?

How to Connect the Reverse Camera Wiring?

What is the solution for P061B fault code?

What is Subject 4 of the Driving Test?

What is the fault with Dongfeng Tianlong EECU?