···
Log in / Register

Can I obtain a medical certificate if my vision fails the driver's license renewal physical exam?

3 Answers
Castillo
07/29/25 1:16am
If your vision fails the driver's license renewal physical exam, you can obtain a qualified medical certificate after correcting your vision or wearing glasses with the appropriate prescription and retaking the exam. Below are specific methods for vision correction: 1. Wearing glasses: This is the most common and direct method of correction. If your vision does not meet the standard, wearing glasses with the correct prescription during the exam will suffice. 2. Vision correction training: Visit a professional ophthalmology institution for vision correction training to achieve the required vision standards. However, this method is relatively more costly and time-consuming.
Was this review help?
2
5
Share
OJanelle
08/12/25 11:03am
I just went for a physical exam to renew my driver's license last week, but I failed the vision test. The doctor said my vision was blurry and I couldn't see the icons clearly. When he asked me how I usually drive, I said it's okay, but he insisted it's not acceptable and I failed. He directly shook his head and said he couldn't issue the medical certificate because it's based on your health condition, and failing the vision test means you don't meet the driving safety standards. Later, I got a pair of glasses and went back to the hospital for a retest. This time, I passed clearly and finally got the certificate. If your vision is not up to standard, the certificate will indicate 'unqualified,' and you can't use it to renew your license. I think this is a good thing—it reminds us to take care of our eyes and not be careless when driving, especially when looking at distant objects. Spend less time staring at screens and more time outdoors; once your vision improves, you won't have to worry about it anymore.
Was this review help?
14
2
Share
Expand All
VanRonan
10/02/25 2:10am
I'm quite familiar with the driver's license physical examination. If your vision doesn't meet the standard, you generally can't obtain a qualified medical certificate. The certificate is issued by the hospital based on your physical condition, and they won't provide a passing document if your vision fails to meet requirements. This certificate is mandatory for license renewal, so if you fail the vision test, the certificate will show as unqualified and you won't be able to use it. But don't worry too much - you can try to improve your vision and retest, such as by wearing appropriate glasses or contact lenses. Some examination centers even offer on-the-spot vision correction. Remember that driving safety comes first, as poor vision can easily lead to accidents that affect others. I recommend you first check for eye issues, whether it's fatigue or aging, and try getting corrective lenses. The entire process is actually designed to ensure everyone's safety.
Was this review help?
13
1
Share
Expand All
More Forum Discussions

Is Audi Original Glass Better or Coated Glass Better?

Choosing coated glass is better. Coated glass offers many color options for the coating, and since the glass coating is applied to the 2nd and 3rd surfaces of the insulated glass, it ensures excellent durability of the coating. Additionally, selecting low-e coated glass can effectively prevent UV damage and more. Introduction to Coated Glass: Coated glass (Coated glass) is also known as reflective glass. Coated glass involves applying one or more layers of metal, alloy, or metal compound films on the glass surface to alter its optical properties and meet specific requirements. Depending on the product's characteristics, coated glass can be categorized into the following types: heat-reflective glass, low-emissivity glass (Low-E), conductive film glass, etc. Production Methods of Coated Glass: There are many production methods for coated glass, mainly including vacuum magnetron sputtering, vacuum evaporation, chemical vapor deposition, and sol-gel methods. Magnetron sputtering coated glass utilizes magnetron sputtering technology to design and manufacture complex multi-layer film systems, allowing for a variety of colors on white glass substrates. The film layers exhibit good corrosion resistance and wear resistance, making it one of the most widely produced and used products currently.
19
0
Share

What is the fuel consumption of the new Bora?

According to the test by the Ministry of Industry and Information Technology, the comprehensive fuel consumption of the new Bora 1.6L is around 6.8 to 7.2, while the 1.4T model is around 6.6. Introduction to fuel consumption: Fuel consumption (Constant-Speed Fuel Economy): Constant-speed fuel consumption refers to the fuel economy indicator when a car is driving at a constant speed on a good road surface. Since constant-speed driving is a basic operating condition for cars on highways, and this type of fuel consumption is easy to measure, it is widely adopted. Comprehensive fuel consumption: Comprehensive fuel consumption is tested under different conditions such as urban roads, highways, and varying loads. It is only a reference, and the actual fuel consumption may be higher or lower than this number. For example, driving daily in busy city areas, frequently braking and accelerating, can lead to higher fuel consumption, even reaching 10 liters per 100 kilometers, which is quite normal.
1
1
Share

Which one is the low beam headlight on the Baojun 560?

The low beam headlight on the Baojun 560 is controlled by a lever on the left side of the steering wheel. Above the turn signal indicator, there is a symbol for the low beam headlight. Twist it twice to turn on the low beam. Introduction to low beam headlights: Low beam headlights are designed for close-range illumination. Their design requirements include a wide coverage angle (160 degrees) and a short illumination distance, with non-adjustable focus. Illumination range of low beam headlights: The low beam headlights illuminate approximately 30-40 meters ahead. According to experiments, when driving at 55 km/h at night, the braking distance after noticing an obstacle is exactly 30 meters. This means that if you spot an obstacle within the low beam's range and brake immediately, there will be no gap between the car and the obstacle. Of course, this is under ideal conditions with good vehicle and road conditions and a quick driver reaction. If the speed is higher, or if the vehicle or road conditions are poor, or the driver is fatigued with slower reactions, the outcome can be imagined. Therefore, it is essential to control your speed when driving at night. On flat, wide, and well-lit roads, you can use high beams and drive slightly faster. However, when encountering oncoming traffic, uneven roads, turns, bridges, narrow roads, or intersections, you should slow down, generally keeping the speed below 40 km/h.
10
0
Share

What is the chassis code of the new Fit?

2021 Fit is the fourth generation Fit, and the chassis code of this model is GR9. The chassis code is commonly known as the frame number, similar to a person's ID number. The frame number is the ID number of that car. Normal frame number locations: Except for trailers and motorcycles, on the door hinge pillar, door lock pillar, or one of the pillars connected to the door lock pillar, near the driver's seat; fixed on the left side of the dashboard; fixed on the inner side of the door, near the driver's seat. It should be in a place where it can be easily read without moving any parts of the vehicle except for the outer door. The VIN code of most domestic cars can be found on the left side of the dashboard or below the windshield. Importance of the frame number: The frame number is like a person's fingerprint. If the steel plate with the frame number is damaged, the owner must not cut the steel plate with the frame number by themselves. The damaged condition of the vehicle must be preserved, and the car should be driven directly to the vehicle management department for certification to prove that the steel plate with the frame number is indeed damaged. Then, the vehicle management department will handle the situation according to the actual circumstances.
16
2
Share

What is the fuel consumption per 100 kilometers for the Audi A7?

Audi A7 has an average fuel consumption of 14.45 liters per 100 kilometers. Introduction to fuel consumption: Constant-Speed Fuel Economy refers to the fuel efficiency indicator when a car is driving at a constant speed on a good road surface. Since constant-speed driving is a basic operating condition for cars on highways, and this type of fuel consumption is easy to measure, it is widely adopted. For example, France and Germany use the constant-speed fuel consumption at 90Km/h and 120Km/h as the main evaluation indicators for fuel economy. China also adopts this indicator. Fuel consumption testing: Special personnel select experimental roads, use a specially marked fuel tank to run a 100-kilometer round trip (acceleration fuel consumption can be calculated, but coasting is not allowed), and then divide by two to calculate the actual constant-speed fuel consumption per 100 kilometers.
5
0
Share

How often should the automatic transmission fluid be changed in a new Santana?

The automatic transmission fluid and filter in the new Santana should be replaced every 60,000 kilometers, or every two years or 50,000 kilometers, whichever comes first. Transmission fluid change interval calculation: The replacement cycle for transmission fluid is calculated the same way as the vehicle's maintenance cycle, based on either mileage or time in use. If the vehicle's manual clearly specifies both indicators, follow whichever comes first. If the manual doesn't provide such indicators or doesn't clearly mark the fluid change interval, replace it every 50,000 to 80,000 kilometers. Transmission fluid change methods: Circulating machine fluid change method: This method can completely clean out the old transmission fluid. However, it's relatively expensive and suitable for vehicles less than 5 years old.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.