Can I Learn to Drive and Take the Driving Test in a Different Location?

1 Answers
VonVanessa
07/25/25 3:43pm
Citizens with normal physical conditions across the country can apply for a driver's license in accordance with regulations, regardless of their location. Application requirements: According to regulations, non-locals can apply for a driver's license below C1 with a temporary residence permit valid for more than one year. However, A1, A2, A3, B1, and B2 driver's licenses must be tested in the applicant's registered residence location. Differences in non-local driver's licenses: A driver's license obtained in a non-local location can only be renewed at the traffic management department that issued the license in that location. However, driver's licenses below C1 do not require annual review; they only need to be renewed every six years. After obtaining a driver's license below C1 in a non-local location, the license can be transferred to the traffic management department of the registered residence location. In terms of driving school fees in non-local locations, the cost for the same type of driving lessons may be slightly higher than for local residents.
Was this review help?
1
5
Share
More Forum Discussions

Where does Lu F belong to?

Lu F license plates are registered in Yantai City, Shandong Province. Here is some information about license plate numbers: 1. The first character of the license plate represents the provincial-level administrative region where the vehicle is registered, which is the abbreviation of the province, municipality, or autonomous region. 2. The second letter of the license plate represents the prefecture-level administrative region where the vehicle is registered, which is the letter code for prefecture-level cities, regions, autonomous prefectures, or leagues. The ranking is usually determined by the provincial vehicle management office based on the status of each prefecture-level administrative region. 3. The license plate is a unique identifier for each vehicle. Its main function is to identify the province, city, or county to which the vehicle belongs. The vehicle management office can use the license plate to look up the owner of the vehicle.
5
4
Share

How to Determine Refrigerant Leakage in Car Air Conditioning?

Here are the methods for detecting leaks in car air conditioning systems: 1. Visual Inspection: When oil traces are found at a certain point in the system, that area may be the leak point. Visual inspection is simple and cost-free, but it has significant limitations. Unless there is a sudden large fracture in the system or the leakage involves a colored liquid medium, visual inspection often cannot pinpoint the leak, as most leaks are very subtle, and many parts of the car air conditioning system are nearly impossible to see. 2. Soap Water Leak Detection: Fill the system with nitrogen, then apply soap water to various parts of the system. Bubbles will appear at the leak points. This is the most common leak detection method used by roadside repair shops. However, due to limited reach of human arms and visibility, many leak points remain undetected. 3. Nitrogen Water Leak Detection: Fill the system with nitrogen and immerse it in water. Bubbles will indicate leak points. This method is essentially the same as the soap water method. Although low-cost, it has significant drawbacks: water used for detection can enter the system, causing corrosion of internal materials. Additionally, high-pressure gas may cause further damage to the system, and the labor intensity during detection is high, increasing maintenance costs. 4. Halogen Lamp Leak Detection: Light the detection lamp and hold the air tube of the halogen lamp. When the tube opening is near a leak point, the flame color turns purple-blue, indicating a significant leakage. This method involves open flames, which are not only dangerous but also produce harmful gases when combined with refrigerant. Moreover, it is difficult to accurately locate the leak point.
14
5
Share

Does the Dash Cam Still Work After the Car Is Turned Off?

There are many scenarios, mainly depending on how it is wired. The details are as follows: 1. Connected to constant power: Works 24 hours. 2. Connected to ACC power: Automatically turns on when the car key is turned to ACC or the engine is started. If the car is turned off but still in the ACC position, it continues to work normally. 3. Connected to the cigarette lighter: If the cigarette lighter still has power after the car is turned off, the dash cam will continue to work. If the cigarette lighter loses power after the car is turned off, the dash cam will shut down. 4. Dash cam with built-in battery: Even if the car does not supply power, if the owner does not turn it off when leaving the car, it will continue to work automatically until the battery is depleted.
7
2
Share

What Causes Unstable Idle Speed?

There are many reasons for unstable idle speed, which are detailed below: 1. Intake manifold or various valve leaks: When unwanted air, gasoline vapor, or exhaust gases enter the intake manifold, it causes the air-fuel mixture to become too rich or too lean, leading to abnormal engine combustion. 2. Excessive carbon deposits in the throttle body and intake passages: Too much carbon buildup or dirt in the throttle body and surrounding intake passages alters the cross-sectional area of the air passage, preventing the control unit from precisely regulating idle air intake. This results in an overly rich or lean mixture, causing abnormal combustion. 3. Malfunction of idle air control components: Faulty idle air control components lead to inaccurate idle air regulation.
17
3
Share

How to Repair a Faulty Car Door Lock?

Solutions for a damaged car door lock are as follows: 1. First, check if the lock actuator is functioning. If there is no movement, it is likely due to poor contact in the central control system wiring, which requires inspection and repair at a service center. 2. If the actuator is functioning, the issue may be excessive resistance in the lock mechanism, often caused by rust. In this case, replacing the lock actuator should resolve the problem. 3. Another possibility is that the position of the door lock motor's latch has shifted. This can be fixed by adjusting it at a repair shop. 4. Lastly, the door lock motor itself may be damaged or lack sufficient pulling force, necessitating its replacement.
2
1
Share

What Causes Insufficient Engine Oil Pressure?

The reasons for insufficient engine oil pressure are as follows: 1. Oil contamination or thickening due to prolonged use: This prevents the oil pump from smoothly drawing in and pumping out oil, resulting in low oil pressure. 2. Excessive wear of components: For example, excessive clearance between the crankshaft and bearings, or malfunction of the pressure relief valve due to weak springs or damaged steel balls, can reduce oil intake and output, leading to low or no oil pressure. 3. Faulty oil pressure sensor, gauge, or circuit: This can cause low oil pressure. 4. Oil thinning: Leakage through the gaps between engine friction pairs can result in low oil pressure.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.