Can I Just Top Up the Coolant If My Car's Coolant Is Low?

1 Answers
DiAubrey
07/25/25 4:45am
You can directly top up the coolant if your car's coolant is low, but there are some precautions to keep in mind: 1. When adding coolant, pay attention to the model and brand. Mixing different brands, models, or dosages can affect its performance. 2. When purchasing antifreeze coolant, pay attention to the freezing point of the coolant. Generally, the freezing point is around -45 degrees Celsius. It's best to choose a coolant with a freezing point at least 10 degrees lower than the lowest winter temperature in your area. 3. Be careful not to open the radiator immediately after turning off the engine. Since the cooling temperature is still high right after shutdown, there is high-pressure gas inside the radiator. Opening the radiator cap at this time can easily scald your hands or face.
Was this review help?
4
4
Share
More Forum Discussions

How to remove the maintenance reminder on Haval H6?

Methods to remove the maintenance reminder on Haval H6: 1. Turn off the ignition, press and hold the button at the lower right corner of the instrument panel; 2. Turn the ignition to the position where all instrument lights are on, and you will notice the small wrench icon on the instrument panel stops flashing; 3. Release the button, then press the button at the lower left corner of the instrument panel, and the maintenance reminder will be removed. The Haval H6 is a compact SUV with dimensions of 4600mm in length, 1860mm in width, and 1720mm in height, with a wheelbase of 2680mm. In terms of power, the Haval H6 is equipped with two engines: a 1.5-liter turbocharged four-cylinder engine and a 2.0-liter turbocharged four-cylinder engine.
19
1
Share

What symbol indicates low engine oil in a car?

The car warning light is an oil can-shaped icon with a wavy line underneath. A yellow oil light indicates that the oil level is below the standard lower limit; a red oil light means the oil is severely lacking, possibly due to a leak or a fuel supply system malfunction. Below are the solutions when the oil light comes on: 1. When the yellow oil light comes on: Open the engine hood, wait for about 3-5 minutes, then pull out the dipstick to check the oil level. If the oil level shown on the dipstick is not within the normal range, you need to add oil up to the standard level. 2. If the oil level is within the normal range, the cause of the light is likely a sensor issue. 3. When the red oil light comes on: It is not recommended to continue driving. Stop the car immediately and wait for assistance.
15
5
Share

What Causes the Shock Absorber Noise When a Lavida Goes Over Bumps?

Lavida shock absorber noise when going over bumps may be caused by deformation of the shock absorber's external structure, oil leakage from the shock absorber, aging, deformation, or abnormal wear of the bearings, loose installation or fixation of the shock absorber, or gaps in the connecting ball joints. Here are some key points to note for shock absorber maintenance: 1. Slow down on uneven roads: Some roads are not paved with cement or have potholes in urban areas. When driving on such roads, it is essential to reduce speed; otherwise, excessive force on the shock absorber can damage the piston. 2. Avoid overloading the trunk: Try not to stack items in the trunk of the car. Excessive weight and prolonged pressure can easily strain the rear wheel shock absorber oil seals, leading to oil leakage. 3. Park on flat surfaces: When parking the car, choose a relatively flat area. Many car owners prefer parking with the wheels on the curb, but this causes uneven force distribution on all four wheels and can also damage the shock absorbers.
7
0
Share

What are the common issues when the car warning light comes on?

The reasons for the vehicle warning light coming on include faults in the coolant temperature sensor, crankshaft sensor, oxygen sensor, spark plugs, ignition coils, etc. Here is some relevant information about the engine warning light: 1. Reasons for the light coming on: The engine warning light (referred to as the MIL light) illuminates when components monitoring vehicle exhaust emissions malfunction, and the On-Board Diagnostics (OBD) system detects excessive emissions. Examples include issues with the ignition coil, spark plugs, catalytic converter, exhaust valve, fuel injector, intake pressure sensor, oxygen sensor, etc. 2. Consequences of the light coming on: When the engine warning light is on, the engine may operate abnormally. If not addressed promptly, it can lead to problems such as increased combustion chamber temperature and accelerated wear, potentially causing premature engine damage. Engine noise may increase, affecting driving and passenger comfort. Fuel consumption may rise, wasting petroleum and financial resources. The engine might burn oil, and exhaust emissions may deteriorate, polluting the environment. To maintain the engine in good working condition, owners can opt for higher-quality gasoline, which often resolves the issue of the engine warning light illuminating.
8
5
Share

What Causes the Foul Smell When the Car Air Conditioner is Running?

Reasons for the foul smell when the car air conditioner is running: dirty air conditioning ventilation ducts, dirty air filters, or damp and moldy air conditioning evaporators. After prolonged use of the car air conditioner, external air enters the car interior through the air conditioning filter and evaporator. Over time, the accumulation of dust and debris can block the air vents, reducing cooling efficiency. The warm and damp evaporator area becomes a breeding ground for mold and bacteria, leading to foul odors. The car air conditioner refers to the air conditioning device installed in the car, which can cool, heat, ventilate, and purify the air inside the cabin, providing a comfortable environment for passengers, reducing driver fatigue, and improving driving safety.
16
1
Share

What gear should be used for uphill driving with a manual transmission?

Generally, a manual transmission uses 3rd gear for uphill driving. However, if the vehicle is carrying heavy loads or passengers, it is recommended to use 2nd gear. The specific gear choice should be determined based on the vehicle's overall power performance, road conditions, the steepness of the slope, and the driver's experience. A manual transmission, or manual gearbox, requires the driver to manually shift gears by moving the gear lever, which changes the gear engagement inside the transmission and alters the gear ratio to achieve speed variation. The principle of a manual transmission vehicle is that the power input shaft is connected to the clutch. The power transmitted from the clutch goes directly through the input shaft to the gear set, which consists of gears of different diameters. Different gear ratios result in completely different power transmission effects. Shifting gears during normal driving refers to changing the gear ratio.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.