Can I install a wireless reversing camera by myself?

Where are ETC devices usually installed in the car?

The installation position of ETC for small cars is generally in the upper middle part of the front windshield, while for large vehicles such as trucks and buses, it is installed in the lower middle part. The suitable installation position should be no lower than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 to 90 degrees. For vehicles with built-in or later-installed anti-explosion film, which may affect the signal transmission of the microwave communication link, the ETC should be installed in the microwave skylight band. ETC is the abbreviation of Electronic-Toll-Collection, meaning electronic toll collection system. To apply for ETC, the vehicle owner needs to provide original and photocopies of their valid ID card and vehicle license. If the application is not made by the owner themselves, the agent's valid ID card is also required. The photocopy of the vehicle license should include the page with the most recent annual inspection stamp. A bank card for deducting highway tolls is also needed, and the vehicle must be registered under the name of an individual aged between 18 and 60. For units or companies, an organization code certificate (or business license) and official seal are required. Here are the precautions for installing ETC: Do not block the view. It is best to install it behind the rearview mirror: Many car models have a large inclination angle of the windshield, which can reduce the driver's field of vision. If this is not considered when installing ETC, it will increase the driver's blind spot. Installing it behind the rearview mirror on the right side can avoid blocking the view. Do not affect charging: The ETC electronic tag consumes power, but generally does not need to be charged or have its battery replaced because it has a solar panel on the back that can charge itself. Therefore, when installing, avoid the black areas on the windshield and do not place it where it may block the solar panel. Once installed, do not remove it casually: The button in the middle of the adhesive is an anti-removal lever, connected to a switch below. After the electronic tag is installed, the windshield will press the anti-removal lever in. If the tag is removed casually, the lever will pop out and trigger the switch, locking the electronic tag and making it unusable. You will then need to go to an ETC service point to unlock it. This is designed to prevent multiple vehicles from sharing one device. When using ETC, note that: The ETC transaction sensing range is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, keep a distance of more than 10 meters from the vehicle in front to avoid automatic sensing and paying for the vehicle in front. The recognition speed for ETC lanes is 20 kilometers per hour. If the speed is too fast, the vehicle device information cannot be read, leading to payment failure. When using a debit card bound to ETC, insufficient balance will also cause payment failure.

7

4

Share

What is the normal tire pressure range for the Geely Vision X6?

The normal tire pressure range for the Geely Vision X6 is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. This data complies with the international GBT2978-2008 standard. The new Vision X6 has its tire pressure monitoring system enabled by default, but the monitoring information is not displayed on the dashboard. Only when the tire pressure is abnormal will the dashboard illuminate the tire pressure warning light. If you need to check the tire pressure information, you can access the tire pressure monitoring option through the settings page on the central control screen. Generally, a tire pressure above 2.8 bar is considered too high, and a tire pressure below 2.0 bar is considered too low. Hazards of excessive tire pressure: Reduced friction and adhesion of the tires, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread pattern of the tire, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; causes excessive stretching deformation of the tire cords, reducing tire elasticity and increasing the load on the vehicle during driving. Hazards of insufficient tire pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; causes heavy steering and potential deviation, posing safety risks; increases movement of various parts of the tire, leading to excessive rolling and abnormal heat generation; reduces the functionality of the cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, causing damage to the bead area and abnormal wear; multiplies friction between the tire and the ground, rapidly increasing tire temperature, softening the tire, and drastically reducing its strength. High-speed driving under these conditions may lead to tire blowouts. If the tire pressure monitoring indicator light illuminates (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Typically, it will alert if the pressure is below 1.8 bar or above 3.0 bar. At this point, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the tire pressure warning light to illuminate. Simply perform a tire pressure reset to resolve this. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is directly installed inside the tire and connected to the tire inflation valve. If the sensor is damaged due to impact while driving, it will also trigger the tire pressure warning light. For sensor damage issues, only a complete replacement of the component is possible.

6

0

Share

How to charge a phone in an Audi Q7?

Simply connect to charge. The USB ports are located inside the center console armrest, equipped with 2 USB ports and one AUX music interface. Connect your mobile device to the Audi music interface using a dedicated USB adapter for charging.

9

2

Share

What to Do If Points Are Deducted During B2 to A2 License Upgrade?

Even if only one point is deducted, you must go to the relevant regional traffic management department within 30 days after the scoring cycle ends to study and learn about road traffic knowledge. Within 15 days, attend a 7-day study session on road traffic regulations and knowledge at the relevant regional traffic management department.

1

Share

How to Handle a Temporarily Seized Motor Vehicle?

A temporarily seized motor vehicle driving license cannot be automatically released, and the seizure cannot be lifted through the Traffic Management 12123 platform after the license is seized. If the seizure is due to unpaid fines or violations of relevant regulations, it is necessary to visit the vehicle management office to pay the fines and handle the related penalties.

8

1

Share

How to Purchase a New Energy Vehicle Charging Pile?

New energy vehicle owners can use map software or related charging brand apps to search and locate nearby public DC charging piles for charging. Using a home charging device is relatively safe and costs less. However, the charging speed is slower, typically taking 8-10 hours to complete a full charge.

9

4

Share

Can I install a wireless reversing camera by myself?

Where are ETC devices usually installed in the car?

What is the normal tire pressure range for the Geely Vision X6?

How to charge a phone in an Audi Q7?

What to Do If Points Are Deducted During B2 to A2 License Upgrade?

How to Handle a Temporarily Seized Motor Vehicle?

How to Purchase a New Energy Vehicle Charging Pile?

What is the difference between 2.0t and 1.5t?

How to Check the Mileage on a Mercedes-Benz E300?

How Many Years Until a Sedan is Scrapped?

Can a Child Safety Seat Be Installed in the Middle of the Back Seat?