···
Log in / Register

Can I go to the service hall if I'm not satisfied with the online license plate selection?

4 Answers
DeJasper
09/02/25 3:45am

If you are not satisfied with the license plate number selected online, you need to wait for three working days before going to the vehicle management office to re-select a number. There are two opportunities to select a license plate number: one online and one at the vehicle management office. Selection requirements: Carefully enter the vehicle identification number (VIN) and personal information as required by the system. The information entered must be completely consistent with the registration information processed at the vehicle management office; otherwise, the selection will be invalid. Points to note during selection: After successfully selecting a license plate number online, the number will be reserved for three working days starting from the second day. During this period, vehicles that have successfully selected a license plate number online are not allowed to re-select or modify the submitted information via the internet. If you are not satisfied with the online selection, you can log in to the online selection system again after three working days to choose a more satisfactory license plate number.

Was this review help?
11
4
Share
DelNicole
09/14/25 6:01am

As a seasoned driver with over a decade of experience, I've encountered many unsatisfactory online license plate selections. When I recently bought a new car, I went through this again—I felt the plate number I picked online was too generic, so I went straight to the DMV office the next day to reapply. I brought my ID, vehicle registration documents, and other required paperwork. The staff checked the system and told me I could change it as long as I hadn’t officially confirmed the selection. On-site, I could browse a large screen displaying numerous available numbers and pick one directly—the whole process was smoother than online, and I could ask for details right away. However, a heads-up: queues at the office can get long, so it’s best to go early. Also, some cities have plate restriction policies, like odd-even rules on holidays, so check the regulations in advance to avoid a wasted trip. Overall, this method is hassle-free and reliable, ensuring timely plate registration without delays.

Was this review help?
11
4
Share
Expand All
DominicFitz
10/28/25 6:44am

As a new driver who just got my license, I wasn't satisfied with the license plate number I selected online for my first car registration, so I went directly to the office to reapply. The process was very simple: I only brought my driver's license and the car purchase invoice. When I asked the front desk staff at the DMV, they helped me cancel the originally selected number on the spot and reopened the number pool for me to choose from. The advantage of going to the office is that there are more options and faster feedback, which is more intuitive than the virtual interface online; there were no additional fees, just the standard processing fee. The downside is that you have to go out in person and might spend some time waiting in line. I recommend checking the local regulations on the official website first—most places support online reselection or in-person processing. It's best to get your license plate sorted out early to avoid driving without one and getting fined, which is something new drivers should pay special attention to.

Was this review help?
3
2
Share
Expand All
VanAyla
12/11/25 7:00am

For someone like me who frequently handles household matters, I find it quite convenient to deal with the dissatisfaction of license plate selection at the DMV office. When I took my child to buy a car and was unhappy with the online plate selection, I simply brought all the required documents to the DMV office and got it sorted out. The staff were efficient, reopening the number pool for me to pick a new plate within minutes—much more time-saving and reliable than online operations. Plus, I could review the on-site number list to avoid choosing a bad one. The cost isn't high, but you should consider the time factor, such as visiting on a weekday when it's less crowded. Some tips: Keep your vehicle documents updated to avoid delays in registration; if you're looking to save money, opt for standard number ranges to reduce waiting time. This method can save you a lot of hassle and is ideal for those who want to steadily complete their family vehicle registration.

Was this review help?
17
2
Share
Expand All
More Forum Discussions

Is It Normal for Car Headlights to Get Hot?

Car headlights getting hot is normal. When the headlights are turned on, the current passing through the filament generates a significant amount of heat, which is why the headlights become hot. Below is an introduction to car headlights: Reasons for car headlights getting hot: When the headlights are turned on, the current passing through the filament generates a large amount of heat, causing the filament to reach a high temperature and emit light. The light emitted by the filament contains infrared components, most of which pass through the bulb's glass and radiate into the surrounding environment, while a small portion is absorbed by the glass. When you touch the headlight cover glass, it will feel very hot. If the headlight is damaged, it is usually replaced with a similar type. Some cars are equipped with High-Intensity Discharge (HID) headlights, which generate high-density light through a high-voltage arc discharge produced by a pre-designed electronic system. Check the headlight lens for cracks. Although surface cracks do not affect the headlight's illumination performance, moisture can seep into the headlight along the cracks, reducing the bulb's lifespan. Introduction to headlight maintenance: If moisture enters the headlight, it will reduce the bulb's lifespan. Therefore, it is important to check the headlight's sealing. If the sealing ring between the lens and the reflector is damaged, replace it promptly. For semi-sealed headlights, if the reflector turns black or the light intensity decreases, it should be replaced.
14
4
Share

What Causes Car Windows to Fail to Open?

Car windows may fail to open due to damaged window lift motors or poor contact in the electrical control wiring harness. Below is relevant information about car windows: Reasons for car window lift failure: To protect the power supply circuit, most window lift motors are equipped with an overheating protection mechanism. If components overheat for any reason, the motor will enter a protection state, causing the window to stop functioning. The door window guide channel is an often-overlooked detail. Over time, dust can accumulate in the guide channel, increasing resistance and potentially making it difficult for the window to rise. Solutions for car window lift failure: Clean the window lift channel by inserting a chopstick wrapped in a towel into the guide channel. Adjust the number of towel layers based on the channel's width to ensure proper thickness. Move the towel-wrapped chopstick up and down vigorously to clean the channel, periodically removing the towel to wash off accumulated dirt until no more dirt is removed. Perform initialization for each window. The initialization method typically involves turning on the ignition switch, pulling and holding the switch to raise the window, continuing to hold for more than 3 seconds after the window reaches the top, releasing the switch and immediately pressing and holding it to lower the window to the bottom for more than 3 seconds, then pulling and holding the switch again to raise the window for more than 3 seconds after it reaches the top. Once initialization is complete, the window should regain its original functionality.
10
5
Share

Where is the rear seat belt buckle located?

Rear seat belt buckles are typically located on the inner side of the seat or embedded in recessed areas of the seat. Some vehicles have shorter buckles designed to be concealed within the gap where the rear seat cushion and backrest meet - simply pull it out when found. If unable to locate, refer to the vehicle's owner's manual which will indicate its position. Seat belts serve as the sole safety protection for drivers, functioning as proactive safety measures that can be lifesaving in critical moments. Even during low-speed driving, collisions or emergency braking can generate sufficient inertial force to render occupants unable to control their bodies, potentially causing injuries from impact with rigid components like steering wheels or windshields.
12
0
Share

How to Set the Cruise Control on the Tiggo 3?

To set the cruise control on the Tiggo 3: After the system is activated and the vehicle reaches the desired speed, press the SET button to maintain that speed. Once the cruise speed is set, you can accelerate normally by pressing the throttle. When you release the throttle, the system will restore the vehicle speed to the preset cruise speed. The Tiggo 3 is a compact SUV under the Chery brand, with body dimensions of 4420mm in length, 1760mm in width, and 1670mm in height, and a wheelbase of 2510mm. In terms of power, the Tiggo 3 is equipped with two engines: a 1.5L naturally aspirated engine and a 1.6L naturally aspirated engine.
14
2
Share

What Does Brake System Failure Include?

Brake failure refers to the loss of braking function. Below is a detailed introduction to the contents of brake failure: Complete Failure: There is no braking effect at all, caused by faults in the brake system. This mainly occurs when the brake system cannot apply sufficient braking force to the vehicle. Reasons include insufficient brake fluid level or air ingress in the brake lines, failure of the brake control system, and various other factors that prevent the brakes from functioning properly. Partial Failure: During normal use of the vehicle, its main systems or components may experience a complete loss of specified functions or a severe decline in main performance due to quality issues. This results in a partial loss of braking effectiveness, where the brakes are less responsive or the stopping distance is significantly longer, making it difficult to stop the vehicle within a short distance. Below is additional information on brake failure:
14
1
Share

How to Determine if the Front of the Car is Not Crossing the Line?

Determining whether the front of the car is crossing the line relies on reference points on the ground and those on the car itself. Drivers can use the rearview mirror on the driver's side door and the lines on the ground as reference points to judge whether the car is crossing the line. At intersections with traffic lights, there are usually many lines on the ground. When drivers see the red light and begin to slow down, they can quickly glance at the lines on the ground, turn the steering wheel one full turn to the left plus 45 degrees, and then keep the rearview mirror aligned with the solid white line while moving forward. While driving, continue to observe whether the rearview mirror remains aligned with the solid white line. If the direction deviates, make timely corrections: turn the steering wheel to the left if the rearview mirror is outside the white line, and turn it to the right if the rearview mirror is inside the white line.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.