Can I go for the vehicle annual inspection in the same month if the validity period ends in July?

1 Answers
07/29/25 3:53pm
Yes, vehicles can undergo inspection and apply for annual review within 3 months before the annual inspection date. Here is relevant information: 1. Timing: It is best to go two months or more than one month in advance. Avoid waiting until there are only a few days left before the inspection expires. Additionally, before the 10th of each month, inspection stations have relatively fewer appointments, making it an ideal time to avoid queues. The number of vehicles increases from mid-month, and the end of the month is the peak period. 2. Emissions test: First, queue up and pay the inspection fee at the payment window, then wait for the test. Before the test, staff will conduct an initial check, mainly verifying whether the engine number matches the vehicle registration certificate, followed by a brief visual inspection of the exterior and condition of the vehicle. Then, fill out the emissions test form. During the test, an inspector will drive the vehicle onto the testing line. Generally, new vehicles pass easily. Once you receive a qualified emissions test form, you can pay at the window and collect the emissions compliance sticker. If the vehicle fails, it must be adjusted at a repair shop and retested.
Was this review help?
15
3
Share
More Forum Discussions

Which Cars Are Equipped with Particulate Filters?

Many vehicles are equipped with particulate filters, such as the 2021 Magotan 330 and Volkswagen models. Here is some information about particulate filters: 1. Introduction: The Diesel Particulate Filter (DPF) is a ceramic filter installed in the diesel engine exhaust system, which captures particulate emissions before they enter the atmosphere. 2. Function: The particulate filter can reduce soot emissions from diesel engines by more than 90%. The captured particulate matter is subsequently burned off during vehicle operation, effectively reducing particulate emissions.
2
3
Share

How to Open the Trunk of a Chevrolet Sail?

Open the driver's door of the Chevrolet Sail, enter the vehicle and locate the trunk release lever on the side of the driver's seat. After finding the trunk release lever on the side of the driver's seat of the Chevrolet Sail, you can pull the lever inside the car to open the trunk. Use the Chevrolet Sail car key to open the trunk from outside the vehicle. Press the trunk release button on the Chevrolet Sail car key to open the trunk.
19
4
Share

What to Do If Insurance Is Purchased but the Vehicle Has Not Undergone Annual Inspection?

If the vehicle has not undergone the annual inspection, it can be deemed as an unqualified vehicle and needs to undergo the inspection again. The annual inspection will be charged according to the standard fee. The original vehicle registration certificate and a copy of the compulsory traffic insurance policy (if lost, a new copy needs to be made on A4 paper). Exterior inspection: Upon arrival at the inspection site, the first step is the exterior inspection. The vehicle needs to be parked in the designated area for exterior inspection.
10
4
Share

How to Deal with Fogging on the Outside of the Windshield When Using Car Air Conditioning?

Enable the front windshield defrosting function and the rear windshield heating function. If fogging occurs on the side windows, slightly opening the windows can quickly remove the fog. Then, set the fan speed to maximum, turn on the A/C switch, and adjust the temperature to the lowest setting. The fog on the windshield will disappear shortly. Increasing air convection can reduce the temperature difference between the inside and outside of the car, thereby weakening the conditions for fog formation. When using, simply spray it evenly on the glass surface and wipe it clean with a dry towel.
9
1
Share

How to use the electronic parking brake in Mercedes-Benz C-Class?

Simply press the brake pedal to bring the vehicle to a complete stop, shift the gear into P (Park), and then press the electronic parking brake button. To release the electronic parking brake, shift into D (Drive) and press the accelerator pedal, or simply press the brake pedal. Press the auto hold function button and stop the vehicle by pressing the brake pedal. This eliminates the need to keep your foot on the brake or use the parking brake. Just press the accelerator pedal, and there's no need for frequent shifting between D and N or D and P in automatic transmission models.
17
1
Share

What are the steps for replacing the BMW handbrake motor?

Release the brake button, remove the tire, and take off the brake caliper. Remove the rear brake caliper, use an E40 spline tool to detach the electronic brake motor, then turn the electronic brake shaft on the caliper clockwise with an E30 spline. Then use a special brake tool to push the brake caliper back (or gently pry it back with a screwdriver). Install the new brake pads, mount the electronic brake motor onto the caliper, and proceed with normal installation. After installation, press the electronic brake button several times.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.