Can I go directly for the annual inspection or do I need to make an appointment?

1 Answers
MacAnastasia
07/30/25 10:48am
You can go directly for the annual inspection, but you will need to wait in line. Vehicles without an appointment can only be inspected after those with appointments have completed their inspections. The waiting time is uncertain, so it is recommended to make an appointment to save time effectively. Documents required for the annual inspection: You need to bring the vehicle's driving license, the owner's ID card or a copy, the valid compulsory traffic insurance policy for the current year, and ensure the vehicle is equipped with a fire extinguisher, warning triangle, and reflective vest. The vehicle's exterior must be intact, and all functions, especially the lighting system, must be operational to pass the inspection. Important notes: The annual inspection can be completed up to three months in advance, applicable to both vehicles exempt from on-site inspection and those requiring it. However, note that the three-month advance period does not include crossing into the next year; the inspection must be completed within the current year. The latest date for the annual inspection is the registration month of the vehicle.
Was this review help?
7
1
Share
More Forum Discussions

Does Tianjin Jinghai Check Electric Light Motorcycles?

To strengthen road traffic management and ensure orderly, safe, and smooth road traffic in the city, in accordance with the "Road Traffic Safety Law of the People's Republic of China," "Several Provisions on Road Traffic Safety in Tianjin," and other laws and regulations, combined with the actual situation of the city, the prohibited areas for motorcycles in the city are hereby announced as follows: 1. Motorcycles are prohibited from traveling on roads within the Outer Ring Road (excluding the Outer Ring Road). 2. Except for special motorcycles such as military, police, and fire rescue vehicles performing tasks, those who violate the provisions of this announcement will be dealt with by the traffic management department of the public security organ according to law. 3. This announcement shall come into effect from the date of issuance and shall be valid for 5 years. The "Announcement of Tianjin Public Security Bureau on Gradually Expanding the Restricted Area for Motorcycles" issued on December 16, 2005, is hereby repealed. The Outer Ring Road referred to in this announcement is the ring road composed of Outer Ring East Road, Outer Ring South Road, Outer Ring West Road, and Outer Ring North Road.
4
3
Share

Anti-glare Rearview Mirror?

Anti-glare rearview mirrors consist of a special mirror, two photodiodes, and an electronic controller. The electronic controller receives signals from the photodiodes for both front and rear light exposure and is installed below the front windshield inside the vehicle. They can be categorized into manual anti-glare rearview mirrors and automatic anti-glare rearview mirrors. Below is relevant information: 1. Anti-glare rearview mirror: Installed below the front windshield inside the vehicle, the anti-glare rearview mirror effectively blocks direct strong light from the rear through physical principles or electronic components, ensuring the driver's vision is not affected and maintaining driving safety. 2. Usage: When the vehicle is exposed to intense light from the rear, the manual anti-glare rearview mirror requires the driver to manually activate the anti-glare function to block the strong light from affecting the driver's vision. When not needed, the anti-glare function can also be manually turned off to clearly observe the traffic conditions behind.
2
5
Share

Which domestic scooter has the smallest displacement?

One of the smallest displacement domestic scooters is an entry-level model under the Benelli brand. This scooter is the 'Benelli Blade BJ150T,' which features a design that stands out from other domestic models. The body has sharp angles, and from the side, the scooter sports large-sized rims and a longer wheelbase, giving it a sporty appearance. The color scheme predominantly uses red, making it visually striking with a strong sense of fashion. In terms of performance, it is equipped with a Benelli-developed single-cylinder, four-stroke engine with an actual displacement of 149cc. It also incorporates mainstream liquid cooling technology, with a bore x stroke (mm) of 57.5x57.5 and an engine compression ratio of 11:1. The engine delivers a maximum power of 8.6 kW at 8500 rpm and a maximum torque of 10.8 N·m at 7000 rpm. Actual tests show that the scooter can reach a top speed of 115 km/h, with a fuel consumption of 2.1L per 100 km. Combining fuel efficiency, the scooter offers a range of approximately 400 km.
16
4
Share

What impact does the implementation of China VI standards have on vehicles?

The implementation of China VI standards does not restrict the use of China V emission vehicles until around 2027, which already exceeds the average vehicle replacement cycle for most household cars. The most significant impact will be a noticeable decline in the depreciation rate of China V vehicles. Here is relevant information: 1. Impact of China VI standards on car owners: The China VI standards primarily target the emission standards for vehicles produced by manufacturers. For consumers, China V vehicles can continue to operate normally. The China VI policy standards are not aimed at restricting the road use of current China V vehicles owned by consumers. 2. Impact of China VI on China V vehicles: The vehicles will depreciate at an accelerated rate. The good news for China V vehicle owners after the implementation of the new China VI standards is that they can still drive normally without affecting the vehicle's regular use. However, with the implementation of China VI emission standards, the resale value of China V used cars is certain to show a downward trend.
11
2
Share

Car Window Won't Roll Up or Down?

Besides the possibility of the window lock switch on the driver's side master control panel being activated, another reason could be that the window lift motor has been operated repeatedly in a short period, causing it to overheat. When the heat cannot dissipate quickly enough, the power window may enter an overheat protection state. Generally, performing continuous window up-and-down operations dozens of times will trigger thermal protection. If the window guide channel is dirty or the glass surface has increased friction, thermal protection may occur earlier. Here is relevant information: 1. Window lift motor damage or poor electrical harness contact: If you notice a burnt smell or unusual noises inside the door panel when holding down the window button, it is likely that the window lift motor components are damaged. 2. Motor overheat protection: To protect the power supply circuit, most window lift motors are equipped with an overheat protection mechanism. If components overheat for any reason, the motor will enter an overheat protection state, causing the window to stop functioning. 3. Excessive resistance in the glass guide channel: The door glass guide channel is often overlooked. Over time, dust can accumulate in the guide channel, increasing resistance and potentially making it difficult for the glass to rise smoothly.
5
0
Share

How to Resolve Automatic Emergency Braking System Malfunction in New Cars?

New car automatic emergency braking system malfunctions can be resolved as follows: wiring or poor contact issues. Use a digital multimeter to check whether the circuit voltage is normal, and look for any loose connections or wiring problems that may require circuit repair. Dirty radar sensors may cause false alarms. Inspect whether the radar sensor is dirty, such as being blocked by mud, catkins, or similar debris on the millimeter-wave radar, which prevents it from identifying the distance of obstacles ahead, leading to limited automatic emergency braking function. You can wipe it clean with a tissue or cloth, and the fault should clear once you get back in the car. Millimeter-wave radar sensor issues. Check whether the power plug of the millimeter-wave radar sensor is loose. After unplugging it, inspect the pins inside for signs of corrosion or detachment, which can cause poor contact in the millimeter-wave radar sensor, resulting in abnormal data transmission and malfunctions. If the radar sensor has an internal fault, it needs replacement. Control module unit failure. Use a computer to read the data from the control module to determine if there are any abnormalities that prevent the millimeter-wave radar and camera from functioning normally, leading to malfunctions. Replace the control module at an auto repair shop.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.