···
Log in / Register

Can I go any day if my driving license expires in August?

5 Answers
LaJuliana
07/29/25 8:06pm
You can apply for the renewal of your driving license at the vehicle management office in the issuing location or elsewhere within any working day during the 90 days before the expiration of your driving license. To renew your motor vehicle driving license upon its expiration, the following conditions must be met: 1. Condition 1: You must not have accumulated 12 penalty points, have an overdue inspection, or have your driving license seized, detained, temporarily suspended, canceled, revoked, or invalidated. 2. Condition 2: You must not have any outstanding traffic violations or unresolved traffic accidents. 3. Condition 3: Drivers who hold a license for large buses, tractors, city buses, medium-sized buses, or large trucks and have accumulated penalty points within one scoring cycle, or drivers who hold a license for other vehicle types and have been involved in a fatal traffic accident where they bear equal or greater responsibility without having their driving license revoked, must participate in at least three hours of study on road traffic safety laws and regulations, safe and civilized driving, emergency response, etc., and receive case-based traffic accident warning education.
Was this review help?
13
2
Share
LeJulian
08/14/25 4:14pm
As an experienced car owner, I can't stress enough how important it is not to overlook your vehicle license expiring in August. If you wait until the last few days before expiration to visit the DMV, you might encounter long queues which can be frustrating and time-consuming. Don't assume you can go anytime - driving with an expired license risks a 200 yuan fine and 3 penalty points if caught by traffic police, and in serious cases, your insurance might even refuse to cover accident damages. I recommend going about a month early, choosing a weekday morning right at 9am when it's less crowded. Just bring simple documents like your ID card and passport photos - the process usually takes about 30 minutes, saving both time and hassle. Don't wait until August - if work gets busy and you forget, you'll be in real trouble.
Was this review help?
18
0
Share
Expand All
LaParker
10/16/25 2:30am
I happened to have my driving license expire last August, and trust me, handling it early is absolutely wise. You can renew it normally within 90 days before expiration, but it's best not to wait until the end of August when students return to school or during holidays—the queues are long and time-consuming. Just bring your ID card and photos to the vehicle management office, and the staff will process it quickly. Some places even support mobile APP appointments, making it convenient and efficient. You can still renew it within a year after expiration, but delaying too long means retaking the theoretical exam, which really isn't necessary. With so many trivial matters in life, it's better to get it done early to avoid hassle.
Was this review help?
6
1
Share
Expand All
Remington
10/16/25 2:32am
When your vehicle license is about to expire, it's best to arrange for renewal in advance. Regulations allow processing to begin 90 days before expiration, and it can still be handled within one year after expiration. However, driving with an expired license is illegal and will result in a 200-yuan fine and 3 demerit points. It's recommended to visit the DMV in the first few days of August when there are fewer people and higher efficiency, rather than waiting until the end-of-month rush. Bring your documents and complete the process directly to save trouble—don't risk temporary convenience that could lead to bigger problems.
Was this review help?
11
0
Share
Expand All
DelEmmett
11/29/25 3:17am
Sharing my experience, the vehicle license expiring in August can be well planned. I suggest making time to visit the DMV in early August, choosing a weekday slot on the reservation app when it's less crowded, and bringing ID photos for an easy renewal. Don't wait until after expiration to avoid affecting driving or insurance. With a busy daily life, getting it done early is a one-time effort that prevents unexpected hassles.
Was this review help?
16
0
Share
Expand All
More Forum Discussions

Why is the engine warning light on the dashboard illuminated?

The engine warning light may illuminate due to the following 7 main reasons: Sensor malfunction: This refers to sensors including coolant temperature, crankshaft position, air flow, intake air temperature, and oxygen sensors. When these sensors are damaged, have poor connections, or experience signal interruptions, the vehicle's ECU cannot accurately obtain engine data, triggering the warning light. Fuel/oil quality issues: Failure to use fuel and engine oil as specified by the manufacturer may cause engine wear, leading to the warning light activation. Poor fuel mixture combustion: Incomplete combustion can cause engine carbon buildup or knocking. When detected by oxygen sensors and reported to the ECU, the warning light will illuminate. Issues like spark plug failure, ignition coil problems, fuel pump malfunction, or fuel line blockages can all lead to poor combustion. Turbocharging problems: The intake boost piping or turbocharger can trigger the warning light. The most common issue is turbocharger damage, often accompanied by oil leaks, excessive oil consumption, power loss, metallic noises, or blue/black exhaust smoke. Intake system issues: Air intake problems may cause engine pipe blockages, potentially triggering the warning light. A dirty air filter that hasn't been regularly cleaned can lead to intake problems. Exhaust system problems: Exhaust faults can also activate the warning light. Common causes include rear oxygen sensor failure, three-way catalytic converter issues, or exhaust camshaft and bearing failures. Using leaded gasoline, lead/silicon-containing lubricant additives, physical damage to the catalytic converter, or fuel system malfunctions may cause three-way catalytic converter problems. Anti-theft system malfunction: If the electronic anti-theft system fails or the anti-theft controller doesn't match the engine ECU, the system may prevent normal engine operation while illuminating the warning light. When the engine warning light illuminates, follow these steps: First check if the engine is operating normally. If there's noticeable shaking, black smoke, etc., avoid restarting the engine. Particularly important - never restart if the red warning light is on. If the engine can start, turn it off and wait 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the ON position (without depressing the clutch). The vehicle will perform a self-check during power-on. After 5-10 seconds, observe if the warning light turns off. If the light remains on, visit a service station promptly. Technicians can use diagnostic tools to read trouble codes, identify specific issues, and perform targeted repairs.
1
1
Share

How to adjust the seats of Emgrand GL?

The method to adjust the seats of Emgrand GL is as follows: 1. Enter the vehicle and locate the seat adjustment switch; 2. Push the left switch forward or backward to adjust the seat's front and rear position; 3. Move the left switch up or down to adjust the seat's height; 4. Use the right switch to adjust the seat back angle. The Emgrand GL is a compact 4-door 5-seater sedan with body dimensions of 4725mm in length, 1802mm in width, and 1478mm in height, with a wheelbase of 2700mm. It is equipped with a 1.4T turbocharged engine and a 6-speed manual transmission, delivering a maximum power of 104 kW and a maximum torque of 235 Nm. The drivetrain is front-wheel drive, with a MacPherson independent front suspension and a torsion beam non-independent rear suspension.
10
4
Share

How to Open the Jaguar Fuel Tank Cap?

The method to open the Jaguar fuel tank cap is: 1. Press the key to unlock, and the fuel tank cap will pop open by itself; 2. Gently press the fuel tank cap. Jaguar is a British luxury car brand, and its models include: Jaguar XFL, Jaguar XEL, Jaguar F-PACE, Jaguar XF, Jaguar XJ, etc. Taking the 2020 Jaguar XFL two-wheel-drive Feng Hua version as an example, it is a mid-to-large-sized 4-door 5-seater sedan with body dimensions of: length 5093mm, width 1880mm, height 1456mm, and a wheelbase of 3100mm. It is equipped with a 2.0T turbocharged engine and an 8-speed automatic transmission, with a maximum power of 147 kilowatts and a maximum torque of 320 Newton meters.
2
1
Share

What gear should be used when driving an automatic transmission car up a steep slope?

When driving an automatic transmission car up a steep slope, use the L gear, which is the low-speed gear. The method for starting an automatic transmission car on an uphill is: 1. Press the brake while pulling up the handbrake; 2. Shift the gear to L or S gear and gradually apply the throttle; 3. When the car's forward power is held back by the handbrake, slowly release the handbrake, and the vehicle will start climbing the slope smoothly. An automatic transmission means that the driver does not need to manually shift gears; the vehicle will automatically select the appropriate gear based on the driving speed and traffic conditions. The gears of an automatic transmission car are: 1. P gear is the parking gear; 2. R gear is the reverse gear; 3. N gear is the neutral gear; 4. D gear is the drive gear; 5. S gear is the sport mode.
12
3
Share

What needs to be replaced during the second car maintenance?

What needs to be replaced during the second car maintenance includes: 1. Engine oil and oil filter; 2. Air filter; 3. Fuel filter; 4. Transmission fluid; 5. Cabin air filter. The second car maintenance refers to secondary maintenance or secondary service, and its inspection items include: 1. Spark plugs; 2. Brake fluid; 3. Throttle valve; 4. Fuel injectors; 5. Tires and braking system; 6. Engine belts; 7. Performance of headlights, warning lights, turn signals and car horn. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting or replacing certain parts of the car, also known as car servicing.
18
0
Share

How to Check for Inventory Cars?

Methods to check for inventory cars include: 1. Check the vehicle nameplate; 2. Inspect tire wear and manufacturing date; 3. Examine whether the inner wall of the exhaust pipe is clean; 4. Look for dust in the engine compartment, check if components are deformed, discolored, neatly arranged, or show signs of removal; 5. Inspect the vehicle's rubber parts for aging or detachment; 6. Check the foot pedals inside the car for wear or excessive dust in the gaps; 7. Observe the gaps in the front and rear bumpers, body gaps, and door gaps, open the doors to check for color differences between the interior and exterior paint; 8. Ensure the paint on the lower edge of the door frame is intact. Inventory cars refer to vehicles that have been in stock for more than 6 months without being sold.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.