Can I get the damage assessed at a 4S shop but not repair there?

What is the fuel consumption of the Ford Raptor 3.5T pickup truck?

The fuel consumption of the Ford Raptor 3.5T pickup truck is 16.7L/100km. The actual fuel consumption may vary depending on specific conditions, such as the driver's habits and road conditions, which can all affect the vehicle's fuel consumption. Here are some related introductions about fuel consumption: 1. Fuel consumption is greatly influenced by driving habits and road conditions. Avoid heavy acceleration, as gradual acceleration from a start is the most fuel-efficient. To save fuel, avoid pressing the accelerator pedal too hard when starting, as heavy acceleration can increase fuel consumption by 2 to 3 times compared to normal acceleration. 2. Maintaining a safe distance and avoiding frequent braking can save even more fuel. If you don't keep a safe distance, you may often need to brake on the road. When braking, the automatic transmission will downshift, requiring the vehicle to accelerate again from a lower gear. Starting from a stop or a low gear requires the engine to consume more fuel.

8

5

Share

How to Distinguish Between a New Car and a Stock Car?

Methods to distinguish whether a car is new or a stock car are: 1. Determine the car's production time by checking the nameplate near the car door, which indicates the production time. A new car is one that has been produced within the last three months. If the production time is longer, it is likely a stock car. 2. Check the "time symbols" on the car's glass, which are the small dot markings in the corners of the glass. These markings represent the production time of the glass. Check if the time on the left and right glass panels is consistent. If not, it indicates that one has been replaced. 3. Examine the wear and tear on the tires. New tires have a layer of "tire hairs" when they are first produced, which disappear after a few hundred kilometers of wear. When picking up a new car, carefully check if the tire hairs on all four tires are still present. 4. Inspect the wear on the car's foot pedals. Look for mud stains or signs of wear in the gaps of the pedals, and check if there is excessive wear on the floor mats under the pedals. 5. Check the dust level on various parts inside the engine compartment. A new car generally has no dust and feels brand new and shiny. In contrast, a high-mileage car will have dust accumulation in the engine compartment. The color of the engine oil in the compartment is also one of the indicators of a high-mileage car. 6. Examine the inner wall of the car's exhaust pipe by touching it with your finger to see if there is any black residue. Note: The mileage displayed on the car's odometer should not be used as the primary reference.

19

0

Share

What is the difference between parking brake and service brake?

The differences between parking brake and service brake are as follows: 1. The traditional meaning of "brake" refers to the "service brake", commonly known as the "foot brake". Its function is to slow down or stop the vehicle during driving. The operation method is very simple, which is to control it by pressing the brake pedal, and the braking force is controlled by the pressure applied to the brake pedal. The deeper you press, the greater the braking force. 2. The parking brake is the traditional "hand brake". Its function is to prevent the vehicle from rolling forward or backward after the vehicle has stopped. After parking, in addition to using the parking brake, it is generally recommended to shift to a lower gear when going uphill (to prevent rolling backward), and shift to first or second gear when going downhill, without stepping on the accelerator, relying solely on gear braking to control the downhill speed.

18

0

Share

What should be paid attention to when driving in summer?

There are the following precautions for driving in summer: 1. Do not drive while fatigued. The long days, short nights, and high temperatures lead to high physical exertion, especially at noon when fatigue and drowsiness are common. Ensure sufficient sleep to maintain energy; 2. Choose and use sunglasses correctly. When selecting sunglasses, avoid those with overly dark lenses and opt for polarized sunglasses; 3. Do not drive in slippers; 4. Do not sleep in a closed car; 5. Prevent tire blowouts due to high temperatures. High temperatures can cause glare on asphalt roads, leading to irritability and lack of concentration while driving. Additionally, the unpredictable summer weather with frequent strong winds and heavy rain increases the likelihood of traffic accidents.

17

3

Share

How to Check Vehicle Emission Standards?

Methods to check vehicle emission standards: 1. Visit the vehicle management office with the motor vehicle registration certificate, locate the corresponding counter, and request the staff to conduct the inquiry. 2. Log in to the Motor Vehicle Environmental Protection Website, click on the query system (note: this system is only for newly manufactured vehicles). If needed, compare your vehicle's model and engine model with the query results, then verify against your vehicle's manufacturing date and the publication date in the query results. 3. Check the vehicle's factory certificate or conformity certificate, where the emission standard is listed in the designated section. 4. View the vehicle's emission standard through the environmental label attached to the car.

10

2

Share

What is Chassis Armor?

Chassis armor, technically known as chassis anti-collision, anti-rust, and soundproof coating, is a high-tech adhesive rubber asphalt coating developed by 3M for vehicle chassis. It is non-toxic, has high coverage and adhesion, and can be sprayed on exposed parts of the vehicle such as the chassis, wheel hubs, fuel tank, lower body panels, and trunk. After rapid drying, it forms a strong elastic protective layer. The following are the functions of chassis armor: 1. Prevent safety accidents caused by chassis scraping. 2. Protect against impacts from flying stones and gravel. 3. Avoid moisture, acid rain, and salt erosion on the metal parts of the vehicle chassis, preventing rust and corrosion, and ensuring driving safety. 4. Reduce noise by lowering body noise and blocking road noise during driving, improving comfort.

16

2

Share

Can I get the damage assessed at a 4S shop but not repair there?

What is the fuel consumption of the Ford Raptor 3.5T pickup truck?

How to Distinguish Between a New Car and a Stock Car?

What is the difference between parking brake and service brake?

What should be paid attention to when driving in summer?

How to Check Vehicle Emission Standards?

What is Chassis Armor?

How to Determine if a Solenoid Valve is Good or Bad?

What Does Basic Maintenance Include?

What is the emission standard for the 2011 Mercedes-Benz GL350 diesel version?

What does the ECO mode in a car mean?