Can I get a temporary car when my vehicle is being repaired at a 4S shop?

Does the BMW 525 Have Automatic Parking Function?

The BMW 525 is equipped with an automatic parking function. Introduction to Reversing Camera: The reversing camera, also known as the parking assist system, reversing visual system, or onboard monitoring system, is widely used in various large, medium, and small vehicles to assist in reversing or driving safety. Function of Reversing Camera: The reversing camera system uses a wide-angle far-infrared camera installed at the rear of the vehicle. Through the display screen inside the car, obstacles behind the vehicle can be clearly seen. The reversing video image involves installing a reversing camera at the rear of the car. When the reverse gear is engaged, the system automatically activates the rear camera, displaying the rear view on the central control or rearview mirror's LCD screen. The reversing video provides a clear and comprehensive view of the rear, enhancing confidence and safety. More advanced reversing video systems can display two guiding lines on the screen. As the steering wheel turns, the reversing curve adjusts accordingly, accurately outlining the reversing trajectory.

2

1

Share

What is the best position to adjust the car's rearview mirrors?

The left side rearview mirror of the car should be adjusted to a position where the front and rear door handles and the wheel arches of the rear wheels are visible; the right side rearview mirror should be adjusted to the same position; the interior rearview mirror should be kept in the center of the rear window to ensure driving safety. Here is some information about car rearview mirrors: 1. Position: Car rearview mirrors are located on the left and right sides of the car's front and inside the car's front area. 2. Function: They reflect the situation behind, beside, and below the car, allowing the driver to indirectly see these areas. They act as a "second pair of eyes," expanding the driver's field of vision. Car rearview mirrors are important safety components, and their mirror surface, shape, and operation are carefully designed. There are corresponding industry standards for the quality and installation of rearview mirrors, which should not be taken lightly.

20

2

Share

Does the Air Conditioning Fan Speed Affect Fuel Consumption?

Adjusting only the fan speed without changing the air conditioning temperature does not affect fuel consumption, and the resulting fuel consumption is negligible. Below is relevant information about fuel consumption: 1. Fuel consumption per 100 kilometers: This refers to the fuel consumption of a vehicle traveling 100 kilometers on the road at a certain speed. It is a theoretical indicator of the vehicle. The fuel consumption per 100 kilometers is a value measured by manufacturers in an objective environment using a dynamometer installed on the vehicle's chassis, converted into speed parameters, and then calculated under specified speeds to determine the theoretical experimental fuel consumption per 100 kilometers for the model. 2. Road condition fuel consumption: Road condition fuel consumption is a fuel indicator calculated based on repeated tests where the vehicle is driven on specified roads at prescribed speeds and times. It is also known as multi-condition road cycle fuel consumption. The standard specifies that each cycle includes various driving conditions and records driving conditions based on indicators such as specified shift times, parking durations, driving speeds, acceleration, braking, and deceleration within each cycle. The values obtained using this method are closer to actual values.

2

5

Share

What are the effects of oil leakage from the BMW valve cover gasket?

BMW valve cover gasket oil leakage has the following effects: 1. Aging and brittleness of the valve cover gasket: Loss of sealing ability leading to oil leakage, which can be resolved by opening the valve cover and replacing the gasket; 2. Oil seepage: Blockage of the PCV valve in the crankcase ventilation system causes excessive internal pressure, ultimately resulting in oil seepage under pressure. Below is more information about the valve chamber: 1. Introduction: In the engine structure, the cavity space where the valve ends are located is called the valve chamber. In typical automotive engine designs, the valve ends are connected to the camshaft via lifters or pushrods; the camshaft controls valve movement, with modern engines often positioning the camshaft above the cylinder head. 2. Structure: The valve chamber is covered by a camshaft cover, forming a nearly enclosed cavity with the cylinder head (also connected to other cavities via oil passages such as return and supply channels). The engine valve cover is simply referred to as the valve chamber cover.

18

2

Share

Reasons Why Car Windows Cannot Be Raised or Lowered?

Here are the reasons why car windows cannot be raised or lowered: 1. The window lift motor is damaged or there is poor contact in the electrical wiring harness. If there is a burnt smell or unusual noise from the door panel when holding down the window button, it is likely due to damage to the window lift motor components. 2. Motor overheating protection. To protect the power supply circuit, most window lift motors have an overheating protection mechanism. If components overheat for some reason, the motor will enter an overheating protection state, causing the window to malfunction. 3. Clogged tracks or aging rubber seals. Most cases of windows not moving are due to mechanical jamming. Simply cleaning the tracks and applying some lubricant can help. If caused by aging or deformed rubber seals, new sealing strips need to be replaced. 4. Loss of initialization data. Disconnecting the battery or cutting power or ground lines to the window control module during maintenance can cause loss of initialization data, preventing the window from functioning. 5. Damaged window switch. The car window switch is used very frequently—almost every time you drive—so the probability of damage is also high.

10

2

Share

Why Does the Exhaust Pipe Smell Strongly of Gasoline When Starting a Cold Engine?

There are several main reasons for a strong gasoline smell when starting a cold engine, which are: 1. Under very low external temperatures, when the water temperature and exhaust pipe temperature are low, combined with the extremely cold external conditions during winter driving, the air-fuel mixture becomes richer. As a result, some of the mixture cannot burn completely and is directly expelled through the exhaust pipe, leading to a noticeable gasoline smell. 2. Issues with the carbon canister or its solenoid valve can cause an overly rich air-fuel mixture during startup. 3. If the local temperature is low and there is excessive carbon buildup inside the engine, the air-fuel mixture may not atomize properly, also contributing to this phenomenon. 4. If the solenoid valve remains closed, gasoline vapors in the carbon canister will accumulate, eventually filling the canister. Any excess vapors will escape into the atmosphere, resulting in a gasoline odor. 5. Leakage from the fuel injector can lead to an overly rich mixture, and the unburned mixture may exit through the exhaust pipe, causing a strong gasoline smell.

3

4

Share

Can I get a temporary car when my vehicle is being repaired at a 4S shop?

Does the BMW 525 Have Automatic Parking Function?

What is the best position to adjust the car's rearview mirrors?

Does the Air Conditioning Fan Speed Affect Fuel Consumption?

What are the effects of oil leakage from the BMW valve cover gasket?

Reasons Why Car Windows Cannot Be Raised or Lowered?

Why Does the Exhaust Pipe Smell Strongly of Gasoline When Starting a Cold Engine?

Mercedes-Benz GLC260L Luxury Edition Function Buttons Explained

Why Does the Steering Wheel Vibrate During Sudden Acceleration?

What is the displacement of Audi's 35TFSI?

The Role of the Thermostat in a Car?