Can I Get a Green License Plate in Hangzhou Without Social Security?

What does it mean for a car to drive on the shoulder?

Driving on the shoulder refers to a vehicle traveling on the far-right lane of the road, which is the edge section closest to the roadside. On both regular roads and highways, driving on the shoulder is not allowed as it is considered dangerous, especially on highways where the far-right lane is designated as an emergency lane, which prohibits regular vehicle traffic. The shoulder is the area between the outer edge of the travel lane and the roadbed, serving as a strip of a certain width. It is designed to maintain the functionality of the travel lane, provide space for temporary parking, and act as lateral support for the road surface. The shoulder helps protect the travel lane and offers a location for vehicles to pull over in case of mechanical failures or emergencies. Under normal circumstances, driving on the shoulder is prohibited. However, in emergencies (including vehicle breakdowns), vehicles may briefly stop on the shoulder. Special vehicles such as police cars, ambulances, and tow trucks performing official duties may use the shoulder as a passageway, while other vehicles can only pass under police direction. This is why the shoulder is also referred to as the emergency stopping lane or emergency traffic lane. Emergency Lane: The emergency lane is typically reserved for emergency vehicles such as police cars, ambulances, or fire trucks to quickly reach the scene of a traffic accident. During normal driving, it is illegal to occupy the emergency lane, and prolonged driving or stopping in this lane is strictly prohibited. Emergency lanes are mainly marked on urban ring roads, expressways, and highways on both sides.

10

0

Share

What Does Panel Beating and Spray Painting Mean?

Panel beating and spray painting is an automotive repair technique that involves restoring deformed sections of a vehicle's metal body. For instance, if a dent is created on the car's exterior shell, panel beating can be used to return it to its original shape. Subsequently, specialized paint is sprayed to restore the deformed metal surface to match the undamaged areas, making it look as good as new. The process of panel beating and spray painting includes three main steps: primer coating, intermediate coating, and topcoat. Primer Coating: Fills sand marks and micro-pores on the workpiece's base layer, enhances the adhesion of subsequent coatings, and also serves as a defect indicator. Intermediate Coating: A crucial layer that prepares a smooth and complete surface for the topcoat. It is the final step in all primer work, improving interlayer adhesion and providing some isolation to ensure the quality stability of the topcoat. Topcoat: The topcoat is divided into single-layer and multi-layer paints, serving as the color-defining and decorative protective layer. Single-layer paint, commonly known as solid color paint or standard paint, can be applied in one layer. Multi-layer paint includes metallic series and pearl series paints, which require two or more layers for application. Metallic paint is made from specially processed aluminum materials, offering high protection, outdoor stability, and excellent visual appeal. Pearl series paint is produced using advanced technology with materials like mica flakes and seashells, resulting in a high-end coating with rich colors and strong decorative effects.

9

3

Share

What to Do If You Fail the Driving Test 5 Times?

Drivers need to bring their ID card and other documents to re-register at the driving school and participate in the learning process. Subject 1 covers theoretical knowledge related to driving. Subject 2 includes skills like reversing into a parking space. Subject 3 focuses on driving skills and common knowledge. Subject 4 involves safe and civilized driving knowledge. Upon passing the test, the corresponding driver's license will be issued.

2

0

Share

Can a car's USB port directly charge a phone?

A car's USB port can charge a phone, but the charging effect is not ideal, and the speed is relatively slow. This is because phone charging uses direct current (DC), while household power supplies provide alternating current (AC). Phone chargers convert AC to DC. The USB port in a vehicle directly provides DC, which is supplied by the car's battery, so using the car's USB port for charging is not a problem. The slow charging speed is because the car's USB port is primarily designed for audio data transmission. The current from this type of port is very small, typically around 5V/0.5A. Therefore, for current phone charging standards, the current and voltage may not meet requirements. The phone might charge when the screen is off, but using it while charging could lead to automatic shutdown. Prolonged use of this port for charging may cause the phone to overheat severely, damage the motherboard, result in failure to power on, or even blow the car's fuse. Additionally, using the car's USB port to charge a phone can increase fuel consumption. Experiments have shown that charging a phone via the USB port reduces the driving distance per gallon of gasoline (approximately 3.8 liters) by about 0.48 kilometers.

9

1

Share

How to Tow a Car?

Prepare the tow rope The most important thing for towing is the tow rope. Choose a sturdy tow rope, otherwise it can easily break during towing. When it's tight, it's easy to handle and the rope won't come off; when the rope becomes loose, it can easily fall off the tow hook, so make sure to hook the tow rope properly. Control the clutch properly, don't suddenly release the clutch and step on the accelerator. Sudden jerks will tighten the tow rope, which can easily damage the tow rope and also harm the vehicle's tow hook.

9

4

Share

What is the correct way to make a left turn in a car?

Observe pedestrians and oncoming traffic ahead, and turn left after confirming safety. At intersections with traffic lights, pay attention to the traffic lights and the movement of pedestrians and vehicles. At intersections with designated lanes, enter the appropriate lane based on your intended direction. When preparing to enter a roundabout, yield to vehicles already inside the intersection. When making a left turn, turn from the left side of the intersection center point. Activate the turn signal when turning, and use low beams when driving at night. If there is no stop line, stop before the intersection. When making a right turn and encountering a vehicle in the same lane waiting for the signal, stop and wait in sequence. Turning vehicles must yield to vehicles and pedestrians going straight. Right-turning vehicles from the opposite direction must yield to left-turning vehicles.

20

2

Share

Can I Get a Green License Plate in Hangzhou Without Social Security?

What does it mean for a car to drive on the shoulder?

What Does Panel Beating and Spray Painting Mean?

What to Do If You Fail the Driving Test 5 Times?

Can a car's USB port directly charge a phone?

How to Tow a Car?

What is the correct way to make a left turn in a car?

How Long Does It Take to Change Car Engine Oil?

What to Do If the Car Shakes After Refueling?

What is a Rear Suspension in a Car?

What to Do If the Driver's License Exam Expires Before Completion?