Can I get a driver's license if I have color weakness in the physical examination?

1 Answers
Vivian
07/29/25 8:58am
You can get a driver's license as long as you are not red-green color blind. Here are the specific details about the driver's license: 1. Probation period: The probation period for a C1 driver's license is one year. After the probation period ends, there is no need to go to the vehicle management office for review or license replacement; you can continue to use the license. 2. Validity period of the driver's license: The initial driver's license is valid for six years. You must go to the vehicle management office to renew the license within 90 days before the six-year validity period expires. 3. Points on the driver's license: The driver's license has a total of 12 points. If you are caught violating traffic rules, points will be deducted according to the actual situation. The points cycle is 12 months from the date of obtaining the license.
Was this review help?
20
5
Share
More Forum Discussions

How to Check Tire Pressure on a Camry?

The tire pressure of a Camry can be checked through the dashboard. Below is an introduction to the Camry: 1. Exterior: The eighth-generation Camry features dual styling designs for the Luxury and Sport versions, both inspired by Toyota's latest "Keen-Look" design language. The Luxury version adopts a massive trapezoidal horizontal grille, with a streamlined body posture, lower waistline, and an extended roofline that increases rear headroom. The Sport version features a three-layer grille front fascia, debuting a two-tone body and an "all-black" cabin design, with distinctive rear styling. Additionally, the Hybrid version, based on the Luxury model, highlights its identity with light blue front and rear lights. 2. Interior: The eighth-generation Camry has undergone significant changes in its interior. All three models share the same interior design, differing only in the materials used for the decorative panels above the glove box and around the gear shift. The interior adopts an asymmetrical design with a Y-shaped curve on the center console. Soft-touch surfaces and metal trim panels inside the cabin are made of premium materials, and for the first time, the instrument panel and console feature a three-dimensional surface decoration process (TOM), creating a visually 3D effect. The new seats in the eighth-generation Camry boast a sporty, contoured design, utilizing new springs and high-density, high-damping polyurethane foam for the seat cushions.
6
4
Share

What is the original tire model of the JAC Refine S3?

1The original tire model of the JAC Refine S3 is 205/55R16. The first number 205 represents the tire width of 205MM, 55 indicates the aspect ratio of the tire section is 55%, meaning the section height is 55% of the width. The letter R stands for radial tire, and 16 represents the rim diameter of 16 inches. The JAC Refine S3 has a top speed of 165km/h and a fuel consumption of 6.7L per 100km. In addition to the model, the tire also displays the following common data: Tire cord material: Indicated by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent the certified speed ratings of tires from 4.8km/h to 300km/h. Commonly used speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Indicates the rim specification compatible with the tire for practical use, such as 'Standard Rim 5.00F'.
9
5
Share

Does the Illumination Distance of Vehicle Headlights Change from Far to Near at Night?

When the illumination distance of vehicle headlights changes from far to near at night, it indicates that the vehicle is currently going uphill. Regarding nighttime driving, changes in headlight illumination: On straight and level roads, the illumination distance remains unchanged. When encountering ordinary curves, the headlights follow the turn, shifting from the center of the road to the side. When going uphill, the headlights' illumination changes from far to near as the vehicle ascends. The symbols for low beam and high beam on the dashboard are different. Generally, emerald green indicates low beam, while dark blue indicates high beam. If another driver flashes their headlights at you while driving, it's best to check whether you have the high beams on, as this may affect others' normal driving. Nighttime driving: Changes in headlight position can help identify and assess road conditions. If the headlight illumination shifts from the center to the side of the road, the road ahead may have a general curve or continuous curves. In the case of continuous curves, the headlights will shift from one side of the road to the other. When driving at night, using low beams is usually sufficient for illumination, and high beams should only be used in special circumstances. If you notice that the headlight illumination is lifting off the ground while driving, possible road conditions ahead include: sharp curves, deep potholes, or reaching the top of a slope. When the headlight illumination shifts from the center to the side of the road, possible road conditions ahead include: general curves or continuous curves. In the case of continuous curves, the headlights will shift from one side of the road to the other.
11
1
Share

What Causes the Odyssey's Engine Warning Light to Illuminate?

There are two scenarios when the engine warning light illuminates: the vehicle has an engine system fault such as sensor issues, maintenance problems, fuel quality issues, poor fuel-air mixture combustion, engine intake problems, turbocharging issues, exhaust problems, or an anti-theft system malfunction. During vehicle startup, the engine performs a self-check, and in this case, the light will turn off after the self-check is completed. If the engine warning light remains illuminated for an extended period, it is advisable to promptly visit a service station for troubleshooting. Below is a detailed explanation of each potential fault: Sensor Issues: Sensors include coolant temperature, crankshaft position, air flow, intake temperature, oxygen sensors, etc. When these sensors are damaged, have poor connections, or experience signal interruptions, the vehicle's ECU cannot accurately obtain engine data, leading to the illumination of the engine warning light. In such cases, it is essential to seek professional inspection at a service center to eliminate potential safety hazards. Maintenance Issues: Poor engine maintenance is the most common cause of the engine warning light turning on. Vehicles have specific maintenance schedules, and failure to adhere to these schedules, combined with poor driving habits, can increase the engine's operational burden, eventually triggering the engine warning light to alert the owner of a fault. Fuel Quality Issues: This refers to both fuel and engine oil. The fuel used in vehicles typically has a specific grade, and engine oil can be semi-synthetic or fully synthetic. Manufacturers usually recommend the appropriate fuel grade and engine oil type. If the owner fails to follow these recommendations, prolonged use can lead to engine wear, causing the warning light to illuminate. Always use the recommended fuel grade and suitable engine oil. Poor Fuel-Air Mixture Combustion: Faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines can lead to poor combustion of the fuel-air mixture. This results in engine carbon buildup or knocking, which the oxygen sensor detects and reports to the ECU, triggering the warning light as a precaution. Intake Issues: Combustion in the engine requires proper air intake, where the air filter plays a crucial role. A dirty or uncleaned air filter can obstruct airflow, potentially leading to blockages and, in severe cases, causing the engine warning light to illuminate. Turbocharging Issues: Problems with the intake boost pipes or turbocharger can also cause the engine warning light to turn on. The most common issue is a damaged turbocharger, accompanied by symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Exhaust Issues: Faults in the rear oxygen sensor, catalytic converter, exhaust camshaft, or bearings can trigger the warning light. The most frequent cause is a malfunctioning catalytic converter, often due to the use of leaded gasoline, lead- or silicon-based oil additives, physical damage, or fuel system issues. Anti-Theft System: If the vehicle's electronic anti-theft system malfunctions or the anti-theft controller is incompatible with the engine ECU, the system may prevent the engine from operating normally, also causing the warning light to illuminate. Solutions for an Illuminated Engine Warning Light: If the engine warning light is on and the vehicle cannot start, this may be due to a faulty fuel pump or ignition components. In such cases, it is recommended to call for assistance immediately. If the engine warning light is on but the vehicle is still drivable, yet exhibits severe shaking or loss of acceleration, pull over safely and call for roadside assistance.
12
5
Share

What is ESP in cars?

ESP in cars stands for Electronic Stability Program, which analyzes vehicle driving state information from various sensors and then sends commands to systems like ABS and EBD to help maintain dynamic balance. ESP can keep the vehicle stable under various conditions, with particularly noticeable effects in cases of oversteer or understeer. The Electronic Stability Control System is an electronic device that has only been developed in recent years, inheriting and further expanding upon the functions of anti-lock braking and traction control. This device significantly improves vehicle braking stability.
5
1
Share

How to Drive Safely on Muddy Roads?

Methods for safe driving on muddy roads: 1. Reduce speed: Drive at medium to low speeds on muddy surfaces to allow the engine to output greater torque. 2. Minimize gear shifting: Avoid changing gears while driving on muddy roads. When pressing the accelerator pedal, the vehicle may stop due to high resistance, and restarting on muddy roads can be difficult. 3. Tire slippage: If one tire starts slipping on a muddy road, gently apply the handbrake and increase the throttle. Applying the handbrake stops the slipping tire from spinning freely, while increasing the throttle boosts the driving force on the other wheel, helping the vehicle to move out of the muddy area.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.