Can I Get a C2 License in One Month?

1 Answers
Cora
07/25/25 7:59am
C2 driver's license can be obtained in at least 2 months at the fastest. The time span is relatively long due to the required training hours. You must meet the required number of training hours before you can take the exam, which significantly extends the time to obtain the license. After passing the Subject 1 exam, you will practice for a period of time before taking Subject 2. Subjects 3 and 4 are usually arranged by the driving school, and the schedule can be very tight. In general, the fastest time to obtain the license is about two months. Exam Content: The exam subjects include three items: traffic regulations and related knowledge, field driving, and road driving (including safe and civilized driving). Exam Subject Sequence: The exam subjects are conducted in the following order: traffic regulations and related knowledge (referred to as Subject 1 [theory]), field driving (referred to as Subject 2 [nine items]), and road driving (referred to as Subject 3 [road test and safe and civilized driving]). During the exam, if you fail the previous subject, the following subjects will not proceed. Each subject has two exam attempts. If you fail both attempts, the current exam will be terminated.
Was this review help?
3
2
Share
More Forum Discussions

What is the ideal wattage for car LED headlights?

Car LED headlights with 70 to 90W are most suitable. The maintenance tips for car LED headlights are as follows: Check the sealing of the headlights: If moisture invades the headlights, the lifespan of the bulbs may be shortened. Therefore, the sealing characteristics of the headlights should be checked. If the sealing ring between the lens and reflector is found to be damaged, it should be replaced immediately. Clean the reflector: For semi-sealed headlights, if the reflector turns black and the brightness decreases, it needs to be replaced. If there is only dust and stains on the reflector, cleaning may suffice without replacement. For reflectors that cannot be completely cleaned by blowing, anhydrous ethanol can be used for wiping. If the reflector is gold-plated or aluminum-plated, it can be wiped with clean water. Adjust the direction of the light beam: During driving, the direction of the light beam may shift due to vehicle vibrations. Therefore, it is necessary to check the direction of the headlight beam during annual inspections. During regular maintenance, professional technicians may also need to periodically inspect and adjust the beam direction.
19
1
Share

What is the fuel tank capacity of the Raptor?

The fuel tank capacity of the Raptor is 136.3 liters. This data is officially published, and Raptor owners can also check it on the vehicle's configuration sheet. The Raptor uses 92-octane fuel, with a fuel consumption of 11.5L per 100 kilometers. A full tank can cover a distance of 1,185 kilometers. During daily driving, it is necessary to always pay attention to the remaining fuel level. This is usually observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are about 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the manufacturer is measured from the bottom of the tank to the safe limit, and there is additional space from the safe limit to the tank opening. This space ensures that the fuel can expand when the temperature rises without overflowing. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked capacity.
8
2
Share

What is the correct method for operating the right-hand throttle on a motorcycle?

When starting, the movements of both hands should be coordinated. As the left hand gradually releases the clutch lever, the right hand should simultaneously increase the throttle. Whether the throttle control is properly coordinated can be judged by listening to the sound of the engine for appropriate operation.
20
1
Share

How to Deal with Motorcycle Backfiring on Throttle Release?

Engine ignition disorder causes backfiring. Reinstall the high-voltage wires of each cylinder according to the ignition sequence to eliminate the fault. Overly lean air-fuel mixture in the engine leads to exhaust pipe backfiring. Check if the carburetor is clogged and adjust the fuel level accordingly.
1
0
Share

What to Do About Squeaky Brakes When Reversing?

Solutions for squeaky brakes when reversing: Apply some lubricant at a repair shop to reduce noise; grind the edges of the brake pads to avoid friction with the raised edges of the brake disc, or replace the brake pads. When choosing brake pads, opt for products from well-known brands whenever possible. If conditions permit, it is recommended to use original equipment manufacturer (OEM) products, as OEM brake pads have the best compatibility with the vehicle's brake calipers, ensuring optimal braking performance. Reasons for squeaky brakes when reversing: Newly replaced brake pads have not fully broken in. It takes about 100 to 200 kilometers for new brake pads to fully break in, so noise from newly replaced brake pads is a normal phenomenon; severely worn brake pads. If the brake pads are significantly worn, the vehicle will produce noticeable noise during braking, accompanied by insufficient braking force. When the vehicle has been parked for an extended period, the braking system may produce noise upon startup. This noise occurs because the brake pads and brake disc rust and lock up after prolonged parking, but the noise will disappear after driving for a while. Deformation of the brake bracket can cause slow brake return, leading to abnormal brake noise. In such cases, it is necessary to visit a repair facility as soon as possible for inspection and troubleshooting to determine the cause of the issue.
18
2
Share

How often should 0W-20 full synthetic oil be changed?

Original 0W-20 super full synthetic oil requires maintenance and replacement every 5,000 kilometers as recommended by 4S shops. Depending on the intended use, synthetic oil can have various components modified. The development of synthetic oil began in the 1930s. At that time, due to the harsh operating conditions of aircraft engine oil, there was a demand for higher-performance oil, leading some chemical plants to start developing and producing synthetic oil. Here is some extended information about engine oil: 1. Types: Engine oil is divided into three types: full synthetic oil, semi-synthetic oil, and mineral oil. 2. Oil specifications: The packaging of engine oil typically displays specifications such as 5W-30, 0W-20, and 5W-40, indicating the oil's grade. The 'W' stands for 'Winter,' meaning the oil can be used in winter if it has this letter. 3. Consequences of insufficient oil: When oil is insufficient, the lubrication effect on the friction surfaces of various engine components deteriorates. Poor lubrication can exacerbate the wear and tear of parts. Additionally, oil plays a crucial role in cooling and heat dissipation. Insufficient oil reduces the engine's cooling capacity, leading to internal overheating, which can further cause bearing corrosion, cylinder scoring, and other issues.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.