Can I drive away immediately after replacing the front windshield?

1 Answers
LeHailey
07/24/25 9:26pm
You cannot drive away immediately after replacing the front windshield. Generally, you need to wait for 12 hours. The windshield is adhered to the car body with glass adhesive, which requires a considerable amount of time to cure. Therefore, after replacing the windshield, you must wait until the adhesive is completely dry before moving the car to prevent issues such as glass misalignment, adhesive failure, or water leakage caused by insufficient curing. Precautions after windshield replacement: 1. Do not wash the car for three days: Avoid washing the car within three days after replacing the windshield, and remove the tape securing the windshield position after three days. 2. Try to avoid driving on excessively bumpy roads: Avoid sudden braking and rapid acceleration to prevent the windshield from shifting. 3. Do not drive on highways: Keep the maximum speed below 80 kilometers per hour. 4. Do not open windows for three days after replacement: Avoid opening windows while driving within three days after replacing the rear windshield to prevent the rear windshield from shifting due to wind pressure.
Was this review help?
3
3
Share
More Forum Discussions

What brand is trlangle tire?

trlangle is a tire brand under Triangle Group, which primarily manufactures radial tires for passenger cars and light trucks, radial tires for trucks and buses, radial tires for engineering machinery, giant radial tires for engineering machinery, giant bias tires for engineering machinery, and standard bias tires. Tires are one of the essential components of a vehicle, serving the following functions: 1. Supporting the entire weight of the vehicle, bearing the load, and transmitting forces and moments in other directions; 2. Ensuring good adhesion between the wheel and the road surface to enhance the vehicle's power performance, braking performance, and passability; 3. Protecting automotive components from severe vibrations and premature damage.
13
0
Share

Which gear should be used when the Qashqai climbs a slope?

The Qashqai uses the S gear when climbing a slope, and can be switched to D gear after the action is completed. The S gear has relatively strong power and is generally switched to this gear when overtaking or climbing a slope. The Qashqai is a compact SUV under Dongfeng Nissan. The car has a length, width, and height of 4401mm, 1837mm, and 1593mm respectively, with a wheelbase of 2646mm. The body type is a 5-door, 5-seat SUV, and the transmission is a CVT continuously variable transmission (simulating 7 gears). The Qashqai's drive mode is front-wheel drive, the front suspension type is MacPherson independent suspension, the rear suspension type is multi-link independent suspension, and the steering assistance type is electric power.
11
5
Share

What are the hidden functions of the Classic Sylphy?

Hidden functions of the Classic Sylphy: 1. One-touch window lift: When the key is in the ON position, during startup or while driving, pull up the switch of the left front window until the glass reaches the top and hold for 5 seconds to activate one-touch window lift. 2. Automatic unlocking when the engine is off: Get in the car, close all four doors and windows, shift to P, turn the key to the ON position without starting the engine, press and hold the left door unlock button for more than 5 seconds until the hazard indicator flashes twice. The body dimensions of the Classic Sylphy are 4631mm in length, 1760mm in width, and 1503mm in height, with a wheelbase of 2700mm. The new Classic Sylphy is equipped with a newly tuned 1.6L engine and paired with a CVT transmission.
19
3
Share

How to Disassemble the Roewe RX5 Car Key?

The method to disassemble the Roewe RX5 car key is as follows: 1. There is a silver button on the top of the key; press it to pop out the mechanical key. 2. After the key pops out, you can see a clasp on the side; use a flat screwdriver to pry it open. 3. Once a gap appears, pull open the cover of the car key. The Roewe RX5 is a compact SUV with a length of 4571mm, a width of 1855mm, a height of 1719mm, and a wheelbase of 2708mm. The car has a top speed of 190 km/h, a fuel tank capacity of 55L, and is equipped with brake assist, electronic stability control, traction control, tire pressure monitoring, seatbelt reminder, and cruise control.
17
5
Share

What are the main functions of the transmission system?

The main function of the transmission system is to transmit the power generated by the engine to the driving wheels of the vehicle, thereby generating driving force and enabling the car to travel at a certain speed. The transmission system generally consists of components such as the clutch, gearbox, universal joint transmission device, final drive, differential, and half-shaft. For front-engine, rear-wheel-drive vehicles, the torque generated by the engine is sequentially transmitted through the clutch, gearbox, universal joint, drive shaft, final drive, differential, and half-shaft to the rear wheels, which is why the rear wheels are also referred to as the driving wheels. Compared to manual transmissions, the structure and operation of the transmission system differ significantly.
11
2
Share

Which country is the Ferrari car brand from?

Ferrari is an Italian automobile brand that primarily manufactures Formula One racing cars, sports cars, and high-performance sports cars. Taking the Ferrari 488 as an example: its engine has a maximum torque of 770 Nm and a maximum horsepower of 720 hp, equipped with a 7-speed dual-clutch transmission. It features brake force distribution, brake assist, traction control, tire pressure monitoring, and run-flat tires. The Ferrari 488 has a length, width, and height of 4605mm, 1975mm, and 1206mm respectively, with a wheelbase of 2650mm. Its top speed is 340 kilometers per hour, and the fuel tank capacity is 78L.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.